Журналы →  Chernye Metally (Ferrous metals) →  2017 →  №12

Chernye Metally (Ferrous metals)



The 12th issue of “Chernye metally” journal (2017) is opened by the usual sections “Iron and steel news of the world” and “Innovations of the metallurgical companies”.


The section “Ironmaking” is presented by the paper written by the specialists from Danieli Corus BV company. They have compared constructions of two blast furnaces with different lining. The first furnace has copper plate cooler and graphite and carborundum refractories, while the second one – external copper evaporating coolers.


The German specialists from Hamburg, Freilassing and Duisburg have presented the joint technique for evaluation of blowing process based on analysis of the spectrum of pressure and vibration measuring signals.


The section “Rolling and other metal forming processes” is opened by the report by Nikolay Gugis about the main tendencies and development directions of Russian rolling production in 2015-2017; this report had been presented at the International rolling congress in Magnitogorsk in October 2017. Two other papers in this section are devoted to the new boron nitride coating for grinding wheels of new generation used for rolls of cold rolling mills and to the preventing coupling used in the powerful extruding press.


Special section is devoted to innovations of the Polytechnic institute of the Tula State University. Four articles present the results of the following researches in the area of engineering technologies: metrological provision of testing of magnetic materials; silicon effect on the structure of facing materials; technological inheritance of the properties of an initial billet in the accuracy parameters of extended axisymmetric parts; the effect of ammonia additions in cementation on forming the structural areas of a hardened layer and profile of carbon and nitrogen concentration.


The specialists from the Ural Federal University presented the results of examination of crystal structure of 32G1, 32G2 and 35KhGF steel samples via EBSD analysis. These samples have been taken from hot-rolled tubes at Sinarsky Pipe Plant. This paper and three other materials are included in the section “Metal science and metallography”.


The issue also has the section “Transport and logistics” and the memorial article on 90th anniversary of Ivan Frantsenyuk, the former director of Novolipetsk Metallurgical Works during many years.

 

You may find below more details about the issue or book printed or electronic version of the journal.


Название Iron and Steel News of the World
News of Metallurgical Companies
Название thyssenkrupp sells CSA metallurgical production facilities to Ternium
Название Continuous casting machine for ultra-wide slabs in China
Название Modernization of the SSAB pickling line in Finland
Источник SMS group
Название Pilot unit for “green hydrogen” production in Linz
Источник voestalpine
Название Hand oscillograph for electromechanical search of defects and their removal
Источник Fluke Deutschland GmbH
Our anniversaries
Название 90th anniversary of I. V. Frantsenyuk
Ironmaking
Название Usage of modular structural principle in designing equipment for ironmaking
Авторы R. van Laar, V. van Straaten
Информация об авторах

Danieli Corus BV (Ijmuiden, Netherlands):

van Laar R.
van Straaten V.

E-mail (common): comms.office@danieli-corus.com

Steel making
Название Analysis of the steel ladle treatment using vibration sensors
Авторы A. Fischer, K. Kruger, M. Weinberg
Информация об авторах

Helmut Schmidt University — University of Bundeswehr (Hamburg, Germany):

Fischer A., Mag. Eng., former Scientific Researcher

 

Max Aicher GmbH & Co. KG (Freilassing, Germany)

Krüger K., Dr. Eng., Prof., Chief Scientific Officer

 

Hüttenwerke Krupp Mannesmann GmbH (Duisburg, Germany)
Weinberg M., Dr. Eng., Head of Technological Department, e-mail: matthias.weinberg@hkm.de

Rolling and metal forming
Название State and main development directions of rolling production in Russian during 2015-2017
Автор N. N. Gugis
Название New grinding tools manufactured from cubic boron nitride and providing efficient roll treatment
Автор G. Melchior
Информация об авторе

Tyrolit — Schleifmittelwerke Swarovski K.G. (Schwaz, Austria):

Melchior G., e-mail: gebhard.melchior@tyrolit.com

Название Metal processing in a powerful extruding press: features of preventing couplings
Авторы Ch. Monka, Ch. von Kalkstein
Информация об авторах

R+W Antriebselemente GmbH (Klingenberg, Germany):

Monka Ch., e-mail: monka@rw-kupplungen.de

 

Europipe GmbH (Mülheim an der Ruhr, Germany):
von Kalkstein Ch.

Machine-building Technologies
New developments of Tula State University
Название Greeting of М. V. Gryazev, the Rector of Tula State University
Название Metrological provision of testing of magnetic materials
Авторы O. I. Boriskin, D. I. Blagoveshchensky, N. P. Ezhova, G. A. Nuzhdin, A. S. Perminov
Информация об авторах

Tula State University (Tula, Russia):

Boriskin O. I., Dr. Eng., Prof., Head of the Chair of Instrumental and Metrological Systems, Director of Polytechnic Institute

 

State Regional Center for Standardization, Metrology and Testing in Tula Region (Tula, Russia):
Blagoveshchensky D. I., Cand. Eng.

 

Central Scientific and Research Institute of Chemustry and Mechanics named after D. I. Mendeleev (Moscow, Russia):
Ezhova N. P.


National University of Science and Technology “MISiS” (Moscow, Russia):
Nuzhdin G. A., Cand. Eng., Associate Prof., E-mail: nuzhdin.65@mail.ru
Perminov A. S., Mag. Eng., Dr., University Assistant

Название Features of silicon effect on the structure of facing materials
Авторы N. B. Fomicheva, L. M. Nechaev, E. V. Markova
Информация об авторах

Tula State University (Tula, Russia):

Fomicheva N. B., Cand. Eng., Associate Prof., Chair of Metal Physics and Metal Science
Nechaev L. M., Cand, Phys.-Math. Sciences, Prof., Chair of Theoretical Mechanics
Markova E. V., Cand. Eng., Associate Prof., Chair of Machinebuilding Technology, e-mail: marta06@yandex.ru

Название Technological inheritance of the properties of an initial billet in the accuracy parameters of extended axisymmetric parts
Авторы A. S. Yamnikov, O. I. Boriskin, O. A. Yamnikova, I. A. Matveev
Информация об авторах

Tula State University (Tula, Russia):

Yamnikov A. S., Dr. Eng., Prof., Chair of Machine-building Technology
Boriskin O. I., Dr. Eng., Prof., Head of the Chair of Instrumental and Metrological Systems, Director of Polytechnic Institute
Yamnikova O. A., Dr. Eng., Prof., Chair of Machine-building Technology
Matveev I. A., Engineer, Post-Graduate, Chair of Machine-building Technology, e-mail: ivan_matveev@list.ru

Название Investigation of the effect of ammonia additions in cementation on forming the structural areas of a hardened layer and profile of carbon and nitrogen concentration
Авторы P. I. Malenko, A. V. Krokhalev, K. J. Relmasira, A. Yu. Leonov
Информация об авторах

Tula State University (Tula, Russia):

Malenko P. I., Cand. Eng., Associate Prof., Chair of Welding, Casting and Technology of Construction Materials, e-mail: malenko@tsu.tula.ru
Relmasira K. J., Post-Graduate, Chair of Metal Physics and Metal Science
Leonov A. Yu., Post-Graduate, Chair of Welding, Casting and Technology of Construction Materials

 

Volgograd State Technical University (Volgograd, Russia)
Krokhalev A. V., Dr. Eng., Associate Prof., Dean of the Faculty of Contruction Materials Technologies

Metal Acience and Metallography
Название Examination of crystal structure of steels 32G1, 32G2 and 32 KhGF via EBSD-analysis
Авторы M. A. Borovykh, O. A. Chikova, V. V. Vyukhin
Информация об авторах

Ural State Federal University named after B. N. Eltsin (Ekaterinburg, Russia):

Borovykh M. A., Post-graduate, Chair of Physics, e-mail: makboro@e1.ru
Chikova O. A., Dr. Eng., Prof., Chair of Physics, e-mail: chik63@mail.ru
Vyukhin V. V., Cand. Eng., Senior Researcher, Scientific Center of Physics of Metal Liquids, e-mail: v.v.vyukhin@urfu.ru

Название Innovations in improvement of characteristics of special steel
Автор G. Olschewski
Информация об авторе

Steeltec (Emmenbrücke, Switzerland):

Olschewski G., Head of Management and Products Development System, e-mail: Guido.Olschewski@steeltec-group.com

Название Complex processes of steel development based on quick prototyping
Авторы H. Springer, D. Raabe
Информация об авторах

Max Plank Institute of Iron Research (Düsseldorf, Germany):

Springer H., e-mail: h.springer@mpie.de
Raabe D.

Название Designing of TWIP steels with quantum mechanical management
Авторы T. Hickel, F. Roters, D. Raabe, J. Neugebauer
Информация об авторах

Max Plank Institute of Iron Research (Düsseldorf, Germany):

Hickel T., e-mail: t.hickel@mpie.de

Roters F.

Raabe D.

Neugebauer J.

Transport and logistics
Название New management system for storage and transportation of slabs
Автор T. Tonjes
Информация об авторе

3tn Industriesoftware GmbH (Holzwickede, Germany):

Tönjes T., e-mail: info@3tn.de

Название Transportation of iron ore and ferrous metals by railroad transport (based on materials of the Russian Railways press department)
* * *
Название Annual thematic contents of «Chernye Metally» journal
Журналы →  Chernye Metally (Ferrous metals) →  2017 →  №12