Journals →  Chernye Metally →  2020 →  #8

Chernye Metally



Lipetsk Metal Forming Scientific Schools
ArticleName Assessment of the possibility to obtain a hot-rolled dual-phase steel strip in the existing run-out table of the continuous wide hot strip mill
ArticleAuthors A. G. Levykina, V. N. Soloviev, I. P. Mazur
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

A. G. Levykina, Post-graduate Student
V. N. Soloviev, Cand. Eng., Associate Prof.
I. P. Mazur, Dr. Eng., Prof., Head of Metal Forming Dept., e-mail: mazur@stu.lipetsk.ru

ArticleName Rolling temperature mode increasing productivity of continuous wide hot strip mill in production of low-carbon steels
ArticleAuthors V. N. Soloviev, E. B. Bobkov
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

V. N. Soloviev, Cand. Eng., Associate Prof.
E. B. Bobkov, Cand. Eng., Associate Prof., e-mail: bobkov0011@yandex.ru

ArticleName Influence of technological parameters of rolling in universal stands on the process of metal displacement from the edges to the longitudinal axis of the roll. Part 1. Technological parameters
ArticleAuthors A. V. Polyakov, R. Shatshu Netshunzim, I. P. Mazur
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

A. V. Polyakov, Post-graduate Student, e-mail: Pool_Akov@mail.ru
R. Shatshu Netshunzim, Post-graduate Student;
I. P. Mazur, Dr. Eng., Prof., Head of Metal Forming Dept., e-mail: mazur@stu.lipetsk.ru

ArticleName Assessment of the actual shape of the hot-rolled strip cross-section contour. Part 1. Geometric parameters
ArticleAuthors S. M. Belskiy, V. A. Pimenov, A. N. Shkarin
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

S. M. Belskiy, Dr. Eng., Prof., e-mail: Belsky-55@yandex.ru
A. N. Shkarin, Post-graduate Student

Novolipetsk Steel – NLMK (Lipetsk, Russia):

V. A. Pimenov, Cand. Eng., Senior Researcher, Chief Specialist

ArticleName Analysis of parameters of the process of splitting steel spherical shot by constrained central impact
ArticleAuthors A. P. Zhiltsov, O. I. Pavlinenko, D. A. Vlasenko, E. P. Levchenko
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

A. P. Zhiltsov, Cand. Eng., Associate Prof.

 

Donbass State Technical University (Alchevsk, Ukraine):

O. A. Pavlinenko, Assistant, Applied Hydromechanics Dept., e-mail: olia.pavlinenko@yandex.ua
D. A. Vlasenko, Senior Lecturer, Ferrous Metals Metallurgy Dept.
E. P. Levchenko, Cand. Eng., Applied Hydromechanics Dept.

ArticleName Increasing the demand for metallurgical specialists for business: improving the educational program
ArticleAuthors I. P. Mazur, V. O. Sitnikov, I. I. Shopin
ArticleAuthorsData

Lipetsk State Technical University (Lipetsk, Russia):

I. P. Mazur, Dr. Eng., Prof., Head of Metal Forming Dept., e-mail: mazur@stu.lipetsk.ru

 

Novolipetsk Steel — NLMK (Lipetsk, Russia):

V. O. Sitnikov, Head of Projects, Directorate of Competence Center, e-mail: sitnikov_vo@nlmk.com
I. I. Shopin, Chief Specialist, Directorate of Competence Center, e-mail: atis1633@gmail.com

Rolling and Other Metal Forming Processes
ArticleName NLMK DanSteel experience in manufacturing of shipbuilding heavy plate grades D36, D40 and D420 up to 55 mm in thickness after normalizing rolling
ArticleAuthors E. A. Goli-Oglu, Z. Greisen
ArticleAuthorsData

NLMK Dansteel A/S (Fredriksvaerk, Denmark):

E. A. Goli-Oglu, Cand. Eng., Process Developer, e-mail: EGoli-Oglu@yandex.ru
Z. Greisen, Dr. Eng., Chief Metallurgist

ArticleName Hot plastic deformation of heat-resistant austenitic AISI 310S steel. Part 1. Simulation of flow stress and dynamic recrystallization
ArticleAuthors A. Yu. Churyumov, A. V. Pozdnyakov, T. A. Churyumova, V. V. Cheverikin
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia):

A. Yu. Churyumov, Cand. Eng., Associate Prof., Dept. of Nonferrous Metallurgy, e-mail: churyumov@misis.ru
A. V. Pozdnyakov, Cand. Eng., Associate Prof., Dept. of Nonferrous Metallurgy
V. V. Cheverikin, Cand. Eng., Leading Resarcher


A. A. Bochvar High-technology Scientific Research Institute for Inorganic Materials (Moscow, Russia):

T. A. Churyumova, Researcher

Metal Science
ArticleName Approximation of deformation diagrams of steels by their mechanical characteristics
ArticleAuthors V. A. Tarasov, V. D. Baskakov, M. A. Baburin, D. S. Boyarsky
ArticleAuthorsData

Bauman Moscow State Technical University (Moscow, Russia):

V. A. Tarasov, Dr. Eng., Prof., “Technology of Aerospace Engineering” Dept., e-mail: tarasov_va@mail.ru
V. D. Baskakov, Dr. Eng., Prof., “Technology of Aerospace Engineering” Dept., e-mail: galcomputer@mail.ru
M. A. Baburin, Candi Eng., Associate Prof., “Technology of Aerospace Engineering” Dept.
D. S. Boyarsky, Student, “Technology of Aerospace Engineering” Dept.

ArticleName Stability of chromium carbide when introducing it into the weld pool melt
ArticleAuthors N. V. Kobernik, A. S. Pankratov, V. V. Petrova, M. A. Aleksandrov
ArticleAuthorsData

Scientific and Education Center “Welding and Control” of Bauman Moscow State Technical University (Moscow, Russia):
N. V. Kobernik, Dr. Eng., e-mail: koberniknv@bmstu.ru
A. S. Pankratov, Cand. Eng.

 

Bauman Moscow State Technical University (Moscow, Russia), Chair for Rocket and Space Engineering Technologies, Moscow, Russia:
V. V. Petrova, Post-graduate Student, “Technology of Aerospace Engineering” Dept.
M. A. Aleksandrov, Engineer, “Technology of Aerospace Engineering” Dept.

Ecology and Economics
ArticleName Decarbonization of ferrous metallurgy: objectives and regulatory instruments
ArticleAuthors N. N. Yashalova, V. S. Vasiltsov, I. M. Potravny
ArticleAuthorsData

Cherepovets State University (Cherepovets, Russia):

N. N. Yashalova, Dr. Econ., Associate Prof., Head of Economics and Management Dept., e-mail: natalij2005@mail.ru
V. S. Vasiltsov, Dr. Econ., Associate Prof., e-mail: 3297@rambler.ru

 

Plekhanov Russian University of Economics (Moscow, Russia):
I. M. Potravny, Dr. Econ., Prof., Basic Dept. “Management on Capital Group Projects and Programs”, e-mail: ecoaudit@bk.ru

Journals →  Chernye Metally →  2020 →  #8