Journals →  Non-ferrous Мetals →  2013 →  #2 →  Back

HEAVY NON-FERROUS METALS
ArticleName Oxide inclusions in copper during its fire refining
ArticleAuthor Selivanov E. N., Popov A. I., Selmenskikh N. I., Lebed A. B.
ArticleAuthorData

Institute of Metallurgy of Ural Department of Russian Academy of Sciences, Yekaterinburg:

E. N. Selivanov, Director,

N. I. Selmenskikh, Researcher, e-mail: selm8@mail.ru

 

“Uralelektromed” JSC, Verkhnyaya Pyshma, Russia:

A. I. Popov, Head of Laboratory of Research Center

A. B. Lebed, Head of Research Center

Abstract

There is estimated the composition of non-metallic inclusions in blister copper during its air oxidation in the conditions of “Uralelektromed” JSC. Two types of oxide inclusions are defined:
– Cu2O and PbO – Sb2O5 – As2O5;
– selenide-tellurides in the form of CuxSeTeS particles, suspended in copper.
During the increasing of oxidation level of copper, the content and sizes of inclusions are decreased from 1–5 to 1–3 mm for the PbO – Sb2O5 – As2O5 oxides, and from 3 to 1 mm for selenides. Lead is a basic component in PbO – Sb2O5 – As2O5. The content of lead is not changed in oxidation process and makes up 55.3% (limiting values), while the content of Sb is increased from 24.8 to 35.2%. The contents of selenium and tellurium are increased in selenides, while the contents of sulphur are decreased by oxidation. There are calculated the rates of floating of oxide particles of Cu2O and PbO – Sb2O5 – As2O5. In connection with low rates of floating of high density oxide particles, it is necessary to assume the additional measures for intensification of refining process (for example, mixing and filtration of melt).

This work was carried out with the support of General Committee of Ural Department of Russian Academy of Sciences (grant No. 12-3-012-UGMK (12-3-012-УГМК)).

keywords Blister copper, refining, oxidation, impurities, oxide inclusions, lead, antimony, arsenic, selenium, oxygen, nickel, sulfur
References

1. Zhukov V. P., Spitchenko V. S., Novokreshche nov S. A., Kholod S. I. Rafinirovanie medi (Refining of copper). Yekaterinburg : Ural Federal University, 2010. 317 p.
2. Mokhov I. E., Mikhaylov S. V., Shishkina L. D., Ivanov V. V. Povedenie myshyaka i surmy pri pirometallurgicheskom proizvodstve medi (Behavior of arsenic and antimony during the process of pyrometallurgical production of copper). Seriya Proizvodstvo tyazhelykh tsvetnykh metallov : obzornaya informatsiya (Series: “Manufacturing of hard non-ferrous metals” : information review). Moscow : TsNIItsvetmet, 1991. Iss. 2. 56 p.
3. Alipbergenov M. K., Akberdin A. A., Bayguatov D. I., Medikhanov D. G., Konurov U. Gornyy zhurnal. Tsvetnye metally. Spetsialnyy vypusk — Mining Journal. Non-ferrous metals. Special issue. 2005. No. 5. pp. 64–66.
4. Dolganova N. V., Kozlov V. A., Vorobeva E. V., Pospelov V. K. Rafinirovanie chernovoy medi ot raz lichnykh primesey (Refining of blister copper from various impurities). Sovershenstvovanie tekhnologicheskikh protsessov pererabotki medsoderzhashchego syrya : sbornik trudov (Improvement of technological processes of copper-containing raw materials processing : collection of proceedings). Sverdlovsk : Unipromed, 1991. pp. 85–90.
5. Tarasov A. V., Okunev A. I. Ognevoe rafinirovanie mednogo loma (Fire refining of copper scrap). Moscow : Gintsvetmet, 2005. 104 p.
6. Tarasov A. V. Proizvodstvo tsvetnykh metallov i splavov : spravochnik : v dvukh tomakh (Production of non-ferrous metals and alloys : reference book : in two volu mes). Moscow : Metallurgiya, 2001. Vol. 2. 408 p.
7. Knacke O., Kubaschewski O., Hesselman K. Thermochemical properties of inorganic substances. Berlin : Springer-Verlag GmbH, 1991. pp. 1114–2412.
8. Barin I. Thermochemical Data of Pure Substances. Part II. Weinheim : VCH Verlags Gesellschaft, 1993.
9. Gurvich L. V., Veitz I. V. et al. Thermodynamic Properties of Individual Substances. 4th edition. Vol. 1. New York : Hemisphere Pub. Co., 1989.
10. Denisov V. M., Belousova N. V., Istomin S. A. et al. Stroenie i svoystva rasplavlennykh oksidov (Structure and properties of melted oxides). Yekaterinburg : Ural Department of Russian Academy of Sciences, 1999. 498 p.
11. Grechko A. V., Kirillin N. I., Neyerovich E. V. Tsvetnye Metally — Non-ferrous metals. 1989. No. 11. pp. 25–29.

Full content Oxide inclusions in copper during its fire refining
Back