Journals →  Non-ferrous Мetals →  2014 →  #2 →  Back

ECONOMICS AND MANAGEMENT OF PRODUCTION
ArticleName Specificity of the product's life-cycle management models
ArticleAuthor Kolychev V. D., Rumyantsev V. P.
ArticleAuthorData

National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Moscow, Russia:

V. D. Kolychev, Deputy Director of Innovation Management Institute, Senior Lecturer of a System Analysis Chair No. 28, e-mail: kolychev@mephi.ru

V. P. Rumyantsev, Assistant Professor of a System Analysis Chair No. 28, e-mail: vprumyantsev@mephi.ru

Abstract

This paper demonstrates some peculiarities of managerial models of product's life-cycle. The authors proposed some important features of mathematical models of the product's life-cycle which make an influence on decision making process and analysis of production stages. Special attention is paid to enlargement and aggregation procedure of product's life-cycle. There is given a number of examples concerning with metal products used in atomic energy sphere. Interpretation of full life-cycle models in case of the project in the sphere of aluminum-matrix nano-composites construction is proposed. The mathematical model of full product’s life-cycle as special chain-like type graph is used for demonstration of enlargement and aggregation effects. There are given the examples of aggregation by time and cost parameters in case of innovation high-tech project. The differences between time and cost aggregations are separately shown. This paper shows the importance of analysis and planning of production-based technologies using life-cycle model and project’s life-cycle processes. There is emphasized the project-management approach to the enterprise innovation activities based on R&D researches in composite production sphere using metal-oriented technologies. The considered approaches can be applied in portfolio analysis and calculations of economical project efficiency for the simplification of assessment procedures.

keywords Innovation project, product's life-cycle, production workflow process, aluminum-matrix composite, nano-powders B4C, aggregation, enlargement, chain-like graph
References

1. Simon A. Burtonshaw-Gunn. Essential tool for Operations management. UK : A John Wiley&Sons, Ltd., Publication, 2010. 146 p.
2. Solomentsev Yu. M., Mitrofanov V. G. Concepts of CALStechnologies. Avtomatizatsiya i Sovremennye Tekhnologii. 2005. Vol. 9. pp. 3–8.
3. Popov V. A., Gulbin V. N., Aksenov A. A., Verchinina E. V. Mechanical alloying for production of metal matrix composites with ultra-fine reinforcements. 7th International Conference on Nanostructured Materials. Wiesbaden, Germany, June 20–24, 2004.
4. Kolychev V. D., Rumyantsev V. P. Sistema vizualnykh modeley upravleniya proektami (Project management visual model system). Nauchnaya vizualizatsiya. Elektronnyy zhurnal = Scientific visualization. Electronic journal. 2014. Vol. 6, No. 3. pp. 14–54.
5. Kaloshkin S. D., Gulbin V. N., Tcherdyntsev V. V. Metal-matrix composites reinforced with quasicrystalline and boron-contained particles. 12th International Symposium on Metastable and Nano Materials ISMANAM-2005. Paris, July 3–7, 2005.
6. Kolychev V. D. Planirovanie i analiz innovatsionnykh proektov s ispolzovaniem setevykh modeley s alternativnoy strukturoy (Planning and analysis of innovation projects, using alternative structure network models). Estestvennye i tekhnicheskie nauki. Tom 1 (Natural and engineering sciences. Volume 1). 2012. pp. 278–284.
7. Kolychev V. D., Rumyantsev V. P. Ob osobennostyakh matematicheskikh modeley polnogo zhiznennogo tsikla innovatsionnykh izdeliy (About peculiarities of mathematical models of complete lifecycle of innovation products). Integral = Integral Journal. 2012. No. 1. pp. 50–51.
8. Popov V. A., Gulbin V. N., Khodos I. I. Structure investigation of metal matrix composites with small reinforcing particles. Eleventh International Conference on Composites Engineering (ICCE/11). Hilton Head Island, South Carolina, August 8–14, 2004.
9. Kolychev V. D., Rumyantsev V. P. Zadacha ukrupneniya setevoy modeli zhiznennogo tsikla proekta (Project life-cycle network model enlargement task). Sbornik nauchnykh statey po itogam mezhdunarodnoy zaochnoy nauchno-prakticheskoy konferentsii “Innovatsionnye preobrazovaniya, prioritetnye napravleniya i tendentsii razvitiya v ekonomike, proektnom menedzhmente” (Collection of scientific papers of the results of international correspondence scientificpractical conference “Innovation transformations, priority ways and development tendencies in economics and project management”). Saint Petersburg : Saint Petersburg Institute of Project Management, April 29–30, 2014. pp. 80–81.
10. Werner Behrens, Peter M. Hawranek. Rukovodstvo po otsenke effektivnosti investitsiy (Investment efficiency assessment manual). Moscow : Interekspert, INFRA-M, 1995. 528 p.
11. Rumyantsev V. P., Nizametdinov Sh. U. Proektirovanie setevykh modeley planirovaniya i upravleniya (Design of network planning and management models). Moscow : National Research Nuclear University MEPhI, 1987. 137 p.
12. William J. Stevenson. Upravlenie proizvodstvom (Production/Operation Management). Moscow : Binom, 2002. 928 p.
13. Clifford F. Gray, Erik W. Larson. Upravlenie proektami (Project Management). Moscow : Delo i Servis, 2007. 608 p.
14. Kolychev V. D. Programmnaya realizatsiya vizualnykh modeley upravleniya proektami (Program realization of visual project management models). Sovremennye problemy nauki i obrazovaniya = Modern problems of science and education. 2014. No. 3. Available at: http://www.science-education.ru/117-13219.
15. Kolychev V. D., Gulbin V. N. Kommertsializatsiya proekta po meditsinskoy radiatsionnoy zashchite (Commercialization of medical radiation protection project). Nauchnaya sessiya MIFI-2012. Tom 3. Ekonomicheskie i pravovye problemy razvitiya atomnoy otrasli (Scientific session of MEPhI-2012. Volume 3. Economical and legal problems of nuclear industry development). 154 p.
16. Kolychev V. D., Gulbin V. N. Analiz ekonomicheskogo effekta i kommertsializatsiya vysokotekhnologichnykh innovatsionnykh proektov v sfere nanotekhnologiy na primere predpriyatiy atomnoy otrasli (Analysis of economic effect and commercialization of high-technology innovation projects in the sphere of nanotechnologies on example of nuclear industry enterprises). Nauchnaya sessiya MIFI-2011. Tom 3. Ekonomicheskie i pravovye problemy razvitiya atomnoy otrasli (Scientific session of MEPhI-2011. Volume 3. Economical and legal problems of nuclear industry development). 168 p.
17. Zaytsev I. V., Korovyakov O. M., Kharitonov V. V., Kolychev V. D., Udyanskiy Yu. N. Sistemnaya otsenka razvitiya energetiki Sakhalinskoy oblasti na osnove atomnykh elektrostantsiy (System assessment of development of energetics of Sakhalin Oblast on the basis of nuclear power plants). Energiya: ekonomika, tekhnika, ekologiya. Zhurnal prezidiuma Rossiyskoy Akademii Nauk = Energy: economics, technics, ecology. Journal of presidium of Russian Academy of Sciences. 2013. No. 11. pp. 18–26.

Language of full-text english
Full content Buy
Back