Journals →  CIS Iron and Steel Review →  2017 →  #1 →  Back

ArticleName Study of microstructure of rolled heavy plates made of low-alloyed pipe steel with increased strength and cold resistance
DOI 10.17580/cisisr.2017.01.06
ArticleAuthor M. V. Chukin, P. P. Poletskov, O. A. Nikitenko, D. G. Nabatchikov
ArticleAuthorData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

M. V. Chukin, Dr. Eng., Prof., Head of the Chair of Material Processing Technology, First Vice-Rector on Science and Innovations, e-mail: m.chukin@mail.ru
P. P. Poletskov, Dr. Eng., Prof., the Chair of Material Processing Technology, e-mail: pavel_poletskov@mail.ru
O. A. Nikitenko, Cand. Eng., Research Assistant, e-mail: olganikitenko@list.ru
D. G. Nabatchikov, Cand. Eng., Research Assistant, e-mail: nabat4ikov@mail.ru

 

The work has been conducted with participation of S. V. Denisov, P. A. Stekanov, E. V. Braichev, N. V. Koptseva, Yu. Yu. Efimova, M. S. Gushchina, A. S. Ishimov, M. S. Zherebtsov, D. M. Chukin.

Abstract

The results of investigations of microstructure and properties of heavy plates made of cold-resistant pipe steel are presented. The series of laboratorial melting experiments on low-carbon steel has been undertaken in the conditions of “Termodeform-MGTU” researching complex with variation of content of alloying elements. Physical simulation of controlled rolling with accelerated cooling according to different procedures has been conducted during this work. Mechanical testing of rolled products have been conducted according to the standard techniques with determination of strength and cold resistance (amount of tough component in the fracture of samples for drop weight tear testing (DWTT) at the temperature –55 °С. The complex of metallograhic investigations has been undertaken in the Centre of collective use (TsKP) of the Scientific and research institute of Nanosteels at Nosov Magnitogorsk State Technical University. Rolled microstructure has been investigated by the methods of optical and scanning electron microscopy. It was revealed that forming of the mixture containing acicular ferrite, polygonal (polyhedral) ferrite and quasi-polygonal ferrite is the optimal way with relation to providing of high cold resistance (> 90 % of tough component in the fracture of samples for DWTT). It was noted that presence in microstructure of essential part of bainite with different morphology forming along the boundaries of large austenite grains leads to deterioration of the properties of rolled material during drop weight tear testing.

The study was financially supported by Ministry of Education and Science of the Russian Federation within the scope of accomplishment of multiple-purpose project on creation of modern high-tech production with the participation of higher education institution (Contract 03.G25.31.0235).

keywords Low-carbon pipe steel, rolled heavy planes, microalloying, controlled rolling, accelerated cooling, microstructure, cold resistance, acicular ferrite, quasi-polygonal ferrite, bainitemartensite areas
References

1. Nastich S. Yu., Morozov Yu. D., Matrosov M. Yu., Denisov S. V., Galkin V. V., Stekanov P. A. Implementation of production facilities for rolled heavy plates made of low-alloyed steels with increased strength and cold-resistance pdrdmeters at 5000 rolling mill of Magnitogorsk Iron and Steel Works. Metallurg. 2011. No. 11. pp. 57–64.
2. Kantor M. M., Bozhenov V. A. Material science provision of durability of major pipelines. Stal. 2010. No. 4. pp. 80–84.
3. Heisterkamp F., Hulka K., Matrosov M. Yu. et al. Niobiumcontaining low-alloyed steels. Moscow : Intermet Engineering, 1999. 94 p.
4. Matrosov M. Yu., Efron L. I., Ilyinsky V. I. et al. Usage of accelerated coolingfor rising of mechanical and technological properties of rolled heavy plates for manufacture of large diameter gas pipeline tubes. Metallurg. 2005. No. 6. pp. 49–54.
5. Salganik V. M., Poletskov P. P., Berezhnaya G. A., Gushchina M. S., Alekseev D. Yu. Investigation of the effect of deformation degree on austenite grain size in low-alloyed steel. Proizvodstvo prokata. 2016. No. 3. pp. 3–8.
6. DeArdo A. J. Modern Thermomechanical Processing of Microalloyed Steel: A Physical Metallurgy Perspective: Microalloying’95 Conf. Proc. (Pittsburgh, PA, June 11–14, 1995.). The Iron and Steel Society. pp. 15–33.
7. Chukin M. V., Poletskov P. P., Denisov S. V., Gushchina M. S., Berezhnaya G. A., Nikitenko O. A., Ishimov A. S. Influence of chromium on structure, phase transformations and properties of high-strength steels. Proizvodstvo prokata. 2016. No. 8. pp. 14–18.
8. Chukin M. V., Poletskov P. P., Nabatchikov D. G., Gushchina M. S., Berezhnaya G. A. Influence of alloying elements on steel properties for different cooling rates. Estestvennye i tekhnicheskie nauki. 2016. No. 8. pp. 62–65.
9. Krauss G., Thompson S. W. Ferritic Microstructures in Continuous Cooled Low- and Ultralowcarbon Steels. ISIJ Int. 1995. Vol. 35. No 8. pp. 937–945.
10. Smirnov M. A., Pyshmintsev I. Yu., Boryakova A. N. On the problem of classification of microstructure of low-carbon pipe steels. Metallurg. 2010. No. 7. pp. 45–51.
11. Matrosov M. Yu., Efron L. I., Kichkina A. A., Lyasotsky I. V. Study of microstructure of pipe steel microalloyed by niobium after different procedures of controlled rolling with accelerated coolong. Metallovedenie i termicheskaya obrabotka metallov. 2008. No. 3 (633). pp. 44–49.
12. Li Jia-D., Jiang Z.-H., Li S.-P. et al. Continuous Cooling Transformation Behaviors and Mechanical Properties of High Strength Microalloyed Pipeline Steel. Proc. HSLP 2010 Int. Seminar on Application of High Strength Line Pipe 2010 (June 28–29, 2010. Xi’an, China). pp. 126–133.
13. Nastich S. Yu. Influence of morphology of the bainite component of microstructure of low-alloyed steel X70 on cold-resistance of rolled plates with large thickness. Metallurg. 2012. No. 3. pp. 62–69.
14. Kim Y. M., Kim S. K., Lim Y. J. et al. Influence of Microstructure on Yield/Tensile Strength Ratio and Low-Temperature Toughness of Pipeline Steels. ISIJ Int. 2002. Vol. 42. No. 12. pp. 1571–1577.
15. Morozov Yu. D., Goli-Oglu E. A., Nastich S. Yu., Knyshev A. V. Modern approaches to production of low-carbon microalloyed pipe steel at Steckel mills. Chernye metally. 2012. No. 9. pp. 8–14.
16. Kazakov A. A., Kazakova E. I., Kiselev D. V., Motovilina G. D. Development of evaluation methods for microstructural heterogeneity of pipe steels. Chernye metally. 2009. No. 12. pp. 12–15.

Full content Study of microstructure of rolled heavy plates made of low-alloyed pipe steel with increased strength and cold resistance
Back