Journals →  Obogashchenie Rud →  2017 →  #6 →  Back

SECONDARY RAW MATERIAL PROCESSING
ArticleName A study of electronics scrap material composition and ways of its valuable components release intensification in disintegration
DOI 10.17580/or.2017.06.08
ArticleAuthor Dmitriev S. V., Stepanyan А. S.
ArticleAuthorData

REC «Mekhanobr-Tekhnika» (St. Petersburg, Russia):
Dmitriev S. V., Chief Specialist, dmitriev_sv@npk_mt.spb.ru
Stepanyan A. S., First Deputy CEO, stepanyan_as@npk-mt.spb.ru

Abstract

Electronics miniaturization complicated the application of physical and mechanical methods for electronics scrap salvaging, and intensified the need for its disintegration prior to separation processes. Copper, as the main heavy metal present in most of valuable components of electronics scrap, is comparatively uniformly-distributed in medium size fractions. This indicates its insufficient release in crushing process in hammer-type crusher. The task of selective release of this type of laminated structure consists in separation of copper foil from polymer matrix. For the purpose of copper release improvement, the process intensification methods, based on difference in composite components’ temperature coefficient of thermal expansion, are proposed. In order to achieve thermal shock for printed-circuit boards, the three methods of their heating were compared: using SHF-heating, HFC-heating and convection heating in muffle-type furnace. Effect of heating with respect to printed-circuit boards release in crushing in hammer-type crusher was studied. It was confirmed that heating of printed-circuit boards permits to intensify copper foil — polymer matrix release. Treatment with HFC (50–100 kHz) provides for practically complete release of copper foil — polymer system, with that, printed-circuit boards temperature does not exceed +50 °С, which is an undeniable advantage over other methods, as cooling is not required prior to subsequent treatment.
The work was performed with the aid from the Ministry of Education and Science of the Russian Federation, the Government Agreement No. 14.585.21.0007. UIPNI RFMEFI 58516X0007.

keywords Microelectronics scrap, printed-circuit boards salvaging, release of laminates, thermal treatment, high-frequency current
References

1. Dmitriev S. V., Stepanyan A. S. Microelectronics scrap salvaging technology and equipment – modern trends. Obogashchenie Rud. 2017. No. 2. pp. 49–53.
2. Vaisberg L. A., Zarogatskiy L. P. New generation of jaw and cone crushers. Stroitelnye i Dorozhnye Mashiny. 2000. No. 7. pp. 16–21.
3. Arsentev V. A., Baranov V. F., Vaisberg L. A. Current state and prospects for development of mineral raw materials crushing and grinding processes. Gornyi Zhurnal. 2007. No. 2. pp. 10–14.
4. Ogunniyi J. O., Vermaak M. K. G., Groot D. R. Chemical composition and liberation characterization of printed circuit board comminution fines for beneficiation investigations. Waste Management. 2009. Vol. 29, Iss. 7. pp. 2140–2146. https://doi.org/10.1016/j.wasman.2009.03.004.
5. Guangwen Zhang, Haifeng Wang, Yaqun He, Xing Yang, Zhen Peng, Tao Zhang, Shuai Wang. Triboelectric separation technology for removing inorganics from non-metalic fraction of waste printed circuit boards: influence of size fraction and process optimization. Waste Management. 2017. Vol. 60. pp. 42–49. https://doi.org/10.1016/j.wasman.2016.08.010.
6. Guangwen Zhang, Haifeng Wang, Tao Zhang, Xing Yang, Weining Xie, Yaqun He. Removing inorganics from nonmetal fraction of waste printed circuit boards by triboelectric separation. Waste Management. 2016. Vol. 49. pp. 230–237.
7. Maris E., Botané P., Wavrer P., Froelich D. Characterizing plastics originating from WEEE: A case study in France. Minerals Engineering. 2015. Vol. 76. pp. 28–37.
8. Takeda T., Shindo Y., Narita F. The thermo-mechanical problem of internal and edge cracks in multi-layered woven GFRP laminates at cryogenic temperatures. AIP Conf. Proc. 2004. Vol. 711. pp. 248–258.
9. Timmerman J. F., Hayes B. S., Seferis J. C. Cryogenic micro-cracking of carbon fiber/epoxy composites: Influences of liber matrix adhesion. J. Compos. Mater. 2003. Vol. 37. pp. 1939–1950.
10. Weinhold M., Jen G. How advanced low coefficient of thermal expansion laminates and prepregs can improve the reliability of printed circuit boards. Circuit World. 2002. Vol. 29. pp. 24–31.
11. Yao Chen, Jinhui Li, Huabo Duan, Zhishi Wang. Thermal cracking of waste printed wiring boards for mechanical recycling by using residual steam preprocessing. Frontiers of Environmental Science & Engineering in China. 2011. Vol. 5, Iss. 2. pp. 167–174.
12. Jinhui Li, Huabo Duan, Keli Yu, Siting Wang. Interfacial and mechanical property analysis of waste printed circuit boards subject to thermal shock. Journal of the Air & Waste Management Association. 2010. Vol. 60, Iss. 2. pp. 229–236. https://doi.org/10.3155/1047-3289.60.2.229.
13. Jing Sun, Wenlong Wang, Zhen Liu, Qingluan Ma, Chao Zhao, Chunyuan Ma. Kinetic study of the pyrolysis of waste printed circuit boards subject to conventional and microwave heating. Energies. 2012. Vol. 5 (9). pp. 3295–3306.
14. Lanin V. L. High-frequency heating for soldering in electronics. Circuits and Systems. 2012. Vol. 3. pp. 238–241.

Language of full-text russian
Full content Buy
Back