Журналы →  Non-ferrous Metals →  2019 →  №2 →  Назад

RARE METALS, SEMICONDUCTORS
Название Beneficiation of oil-saturated leucoxene ore by physical methods with preliminary thermal oil removing
DOI 10.17580/nfm.2019.02.07
Автор Anisonyan K. G., Kopyev D. Yu., Olyunina T. V., Sadykhov G. B.
Информация об авторе

A. A. Baikov Institute of Metallurgy and Materials Science, Russian Academy of Sciences, Moscow:

K. G. Anisonyan, Senior Researcher, e-mail: kanisonyan@imet.ac.ru
D. Yu. Kopyev, Researcher
T. V. Olyunina, Senior Researcher
G. B. Sadykhov, Head of Laboratory, Chief Researcher

Реферат

The paper presents the results of studies on the beneficiation of leucoxene ore from the Yaregskoe deposit (Komi Republic) with preliminary thermal petroleum removing by water vapor. It was shown that heat treatment of oil-bearing leucoxene ore allows to achieve complete extraction of oil into a separate fraction (8–9% by weight of the original ore) at heat treatment temperatures of 550–600 oC. The beneficiation possibility of the mineral part of the ore by electrostatic and magnetic separation methods was studied. It has been established that the use of electrostatic separation does not allow complete selective removal of free quartz grains due to the fact that during the thermal distillation, oil pyrolysis occurs, resulting in the formation of coke residue, which is located on the surface of ore grains in the form of thin films. In this regard, the possibility of electrostatic separation with preliminary washing of ore from oil with an organic solvent was investigated. At the same time, the through yield of the conductive fraction was 16% with a TiO2 content of 40–50%. An increase in the number of purifications leads to a decrease in titanium extraction (up to 65–70%). Significant heterogeneity of the distribution of components by fractions occurs due to the presence of leucoxene and quartz intergrowths in the concentrate, which distribute the charge non-uniformly. Due to the fact that the resulting coke residue during pyrolysis can be used as a reducing agent, a combined process of heat treatment of ore was carried out, which combine the operations of oil distillation (550–600 oC) and magnetizing roasting (1100–1200 oC). As a result of magnetic separation of the reduced ore, a rich leucoxene concentrate (65% TiO2) was obtained with TiO2 extraction of about 90%. This combined process of heat treatment of oil-saturated leucoxene ore with subsequent magnetic separation will increase the efficiency of its beneficiation in comparison with the flotation method.

This work is supported by the Basic Research Program of the Presidium of the Russian Academy of Sciences №39 (Registration number R&D AAAA-A18-118032090120-7).

Ключевые слова Yaregskoe deposit, leucoxene ore, titanium concentrate, magnetizing roasting, electrostatic separation, magnetic separation, pyrolysis
Библиографический список

1. Mashkovtsev G. A., Bykhovsky L. Z., Remizova L. I., Chebotareva O. S. On The Supply Of The Russian Industry With Titanium Raw Materials. Mineral Resources of Russia. Economics and Management. 2016. No. 5. pp. 9–15.
2. State Report on the State and Use of Mineral Resources of the Russian Federation in 2016 and 2017. URL: http://www.mnr.gov.ru/upload/iblock/902/gosdoklad.pdf (accessed: 05.12.19)
3. Parshin A. A. Features of the Extraction and Processing of High Viscosity Oils. Geology. Geography and Global Energy. 2008. No. 3. pp. 100–102.
4. Ametov I. M., Baidikov Yu. N., Ruzin L. M., Spiridonov Yu. A. Production of heavy and highly viscous oils. Moscow: Nedra, 1985. 205 p.
5. Gerasimov I. V., Konoplev Yu. P., Gulyaev V. E. Complex Development of the Yaregskoe Oil-Titanium Deposit. Territorija Neftegas. 2011. No. 11. pp. 26–31.
6. Enhanced Oil Recovery Field Case Studies. Ed. by J. Sheng. Gulf Professional Publishing, 2013. 712 p.
7. Andy Hong P. K., Cha Zh., Zhao X., Cheng C.-J., Duyvesteyn W. Extraction of Bitumen from Oil Sands with Hot Water and Pressure Cycles. Fuel Processing Technology. 2013. Vol. 106. pp. 460–467.
8. Ershova O. V. Prospects for the Development of the “Titanium-1” Section of the Yaregskoe Oil Field. Proceedings of the 17th International Scientific Symposium of Students, Postgraduates and Young Scientists Devoted to the 150th Anniversary of Academician V. A. Obruchev and 130th Anniversary of Academician M. A. Usov, Founders of Siberian Mining School. Vol. 1. Tomsk: Tomsk Polytechnic University Publishing House, 2013. pp. 169–171.
9. Pat. 177367 USSR 177367, IPC B 03d. A Method of Preparing for Flotation of Naturally Oil-Saturated Titanium-Containing Sands. Avdzhiev G. R., Klimuk A. P., Chernoritsky A. V.; Applicant and Patent Holder: VNIIIPG. No. 865871 / 22-3; Declared 11/16/1963; Publ. 12/18/1965. Bull. No. 2. 3 p.
10. Anisonyan K. G., Sadykhov G. B., Olyunina T. V., Goncharenko T. V., Leontiev L. I. Investigation of the Process of Magnetizing Roasting of Leucoxene Concentrate. Metals. 2011. No. 4. pp. 62–66.
11. Sadykhov G. B., Zablotskaya Yu. V., Anisonyan K. G., Olyunina T. V. On the Complex Use of Leucoxene Ores of The Yaregskoe Deposit with the Production of Synthetic Rutile and Wollastonite and Associated Extraction of Rare and Rare-Earth Elements. Metals. 2016. No. 6. pp. 3–10.
12. Zanaveskin K. L., Maslennikov A. N., Dmitriev G. S., Zanaveskin L. N. Autoclave Processing of Quartz-Leucoxene Concentrate (Yaregskoe Deposit). Tsvetnye Metally. 2016. No. 3. pp. 49–56. DOI: 10.17580/tsm.2016.03.08.
13. Kopyev D. Yu., Anisonyan K. G., Goncharov K. V., Olyunina T. V., Sadykhov G. B. Studying Phase Transformations During Reductive Firing of a Leucoxene Concentrate With Carbon. Metals. 2017. No. 3. pp. 3–7.
14. Kopiev D. Yu., Anisonyan K. G., Olyunina T. V., Sadykhov G. B. Effect of the Reducing Roasting Conditions on Sulfuric Acid Recovery of Leucoxene Concentrate. Tsvetnye Metally. 2018. No. 11. pp. 56–61. DOI: 10.17580/tsm.2018.11.08
15. Handbook of Ore Beneficiation. Main processes. Ed. by O. S. Bogdanova, 2nd ed., rev. and add. Moscow: Nedra, 1983. 381 p.

Полный текст статьи Beneficiation of oil-saturated leucoxene ore by physical methods with preliminary thermal oil removing
Назад