Journals →  Gornyi Zhurnal →  2020 →  #3 →  Back

PROCESSING AND COMPLEX USAGE OF MINERAL RAW MATERIALS
ArticleName The use of computer models of separators for the performance evaluation of mineral processing
DOI 10.17580/gzh.2020.03.09
ArticleAuthor Skorokhodov V. F., Khokhulya M. S., Fomin A. V., Nikitin R. M.
ArticleAuthorData

Mining Institute, Kola Science Center, Russian Academy of Sciences, Apatity, Russia:

V. F. Skorokhodov, Leading Researcher, Doctor of Engineering Sciences, skorohodov@goi.kolasc.net.ru
M. S. Khokhulya, Leading Researcher, Candidate of Engineering Sciences
A. V. Fomin, Junior Researcher
R. M. Nikitin, Researcher

Abstract

The article discusses a new approach to modernization of the current gravity concentration of the rougher magnetic separation tailings at Olkon company using computer modeling of spiral separation. The proposed approach made it possible to shorten the research time and to improve efficiency. Using the computational hydrodynamics methods, it was proved to be expedient to replace jigging machines by spiral separators for the effective dressing of the rougher magnetic separation tailings. The use of the proposed approach in the computational experiment with a model of heterogeneous medium of flotation enables formulation of the one-validness conditions with regard to physical and physicochemical properties of the solid components in flotation feed. An important advantage of the method is its ability to take into account processes at interfaces of phases of all separation fractions with different inertia and surface properties. Verification of the computational experiment results showed high correlation between the model parameters and the process data of flotation carried out on a laboratory scale or in industry. The use of the proposed approach in the studies into the distribution of minerals in flotation products with CED model gives an insight into the hydrodynamics of a system, reveals regular patterns in distribution of concentrations and velocities of the flotation pup components and simplifies assessment of flotation performance. Furthermore, the experiment makes it possible to predict the output of the integrated separation of minerals in flotation feed with regard to accretions if present. The computational experimentation with ANSYS Fluent produces the integro-differential estimate of physical and statistical parameters of phases in any region of a tests system, at any time and both in graphical and numerical form. The flotation analysis using this computational experiment allows eliminating installation of gauges and sensors inside the working volume of flotation machine while the data on the process are nevertheless obtained, with minimized material resources and timing budget required for a similar physical test.

keywords Computer modeling, computational experiment, mineral processing, iron quartzites, rougher magnetic separation, tailings nepheline flotation
References

1. Pashkevich М. А., Petrova T. A. New isolation materials for technogenic deposits conservation. Obogashchenie Rud. 2015. No. 6. pp. 46–49. DOI: 10.17580/or.2015.06.09
2. Khokhulya M. S., Opalev A. S., Fomin A. V., Biryukov V. V. Computational thermodynamics for studying mineral separation processes and developing new processing equipment. Trudy Fersmanovskoy nauchnoy sessii GI KNTs RAN. 2017. No. 14. pp. 336–338.
3. Khokhulya M. S., Fomin A. V. The use of computational fluid dynamics methods in the gravity separation of various mineral raw materials. GIAB. 2017. Special issue 23. Information technologies in ecological strategy of mining development. pp. 474–482.
4. Khokhulya M., Fomin A., Mukhina T., Kontorina T. Development of complex magneto-gravity separation technology of rare metal materials using computer modelling. Proceedings of the 16th International Multidisciplinary Scientific GeoConference. Albena, 2016. Book 1, Vol. 2. pp. 1057–1064.
5. Hirt C. W., Nichols B. D. Volume of fluid ( VOF) method for the dynamics of free boundaries. Journal of Computational Physics. 1981. Vol. 39, Iss. 1. pp. 201–225.
6. Menter F. R. Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications. AIAA Journal. 1994. Vol. 32, No. 8. pp. 1598–1605.
7. Cundall P. A., Strack O. D. L. A discrete numerical model for granular assemblies. Geotechnique. 1979. Vol. 29, Iss. 1. pp. 47–65.
8. Dzhamyarov S., Evtiminova K., Hristov N., Grigorova I., Nishkov I. Influence of technological process waters on the flotation parameters. Proceedings of XV Balkan Mineral Processing Congress. Sofia : PH “St. Ivan Rilski”, 2013. Vol. 1. pp. 281–285.
9. Mousumi Gharai, Venugopal R. Modeling of Flotation Process – An Overview of Different Approaches. Mineral Processing and Extractive Metallurgy Review. 2016. Vol. 37, Iss. 2. pp. 120–133.
10. Jovanović I., Miljanović I. Modelling of flotation processes by classical mathematical methods – a review. Archives of Mining Sciences. 2015. Vol. 60, No. 4. pp. 905–919.
11. Sizyakov V. М., Nazarov Yu. P., Brichkin V. N., Sizyakova E. V. Processing of aged dumped tailings of apatite-nepheline ores flotation. Obogashchenie Rud. 2016. No. 2. pp. 33–39. DOI: 10.17580/or.2016.02.06
12. Kruchinina N. E., Kuzin E. N. Obtaining of hardened forms of aluminium-silicate coagulants and their use in water-purification and water treatment. Tsvetnye Metally. 2016. No. 10. pp. 6–13. DOI: 10.17580/tsm.2016.10.01
13. Schoonheydt R. A., Johnston C. T. The surface properties of clay minerals. EMU Notes in Mineralogy. 2011. Vol. 11. pp. 337–373.
14. Nikolaeva N., Aleksandrova T., Semenikhin D. Study of specific surface energy of ores at disintegration with the use of chemical reagents. Proceedings of the 17th International Multidisciplinary Scientific GeoConference. Albena, 2017. Vol. 17, Iss. 11. pp. 1067–1072.
15. Peleka E. N., Matis K. A. Hydrodynamic aspects of flotation separation. Open Chemistry. 2016. Vol. 14, Iss. 14. pp. 132–139.

Language of full-text russian
Full content Buy
Back