Journals →  CIS Iron and Steel Review →  2020 →  #1 →  Back

Steel Making and Ferroalloys
ArticleName Research of physical and chemical characteristics of the new complex calcium-containing ferroalloy
DOI 10.17580/cisisr.2020.01.04
ArticleAuthor E. N. Makhambetov, N. R. Timirbaeva, S. O. Baisanov, A. S. Baisanov
ArticleAuthorData

Chemical and Metallurgical Institute named after Zh. Abishev (Karaganda, Kazakhstan):

Ye. N. Makhambetov, Mag. Eng., Scientific Researcher, Lab. of Pyrometallurgical Processes
N. R. Timirbayeva, Mag. Eng., Junior Scientific Researcher, Lab. of Pyrometallurgical Processes, E-mail: nina.timirbaeva23@gmail.com
S. O. Baisanov, Dr. Eng., Prof., Director
A. S. Baisanov, Cand. Eng., Associate Prof., Head of the of Pyrometallurgical Processes

Abstract

Complex ferroalloys which include alkaline earth metals (such as calcium, magnesium, barium and other metals) have particular importance for high-quality metallurgy. In addition, development of the theory and practice of modification of cast iron, cast and deformed steel stipulated necessity in creation of the new type of product — modifiers with participation of rare earth and alkaline earth elements. Alkaline earth metals (AEM), having a high chemical affinity to oxygen and most other harmful impurities, as well as low solubility in liquid iron, are one of the most effective deoxidizers, desulfurizers, dephosphorizers and steel modifiers. The widespread use of AEM in the industry opens up real possibilities for quality improvment of steel and cast iron, reduction of the mass of metal products, rise of their operation reliability and durability and, as a result, significant metal savings. Previously the authors have developed the experimental batch of complex ferroalloy containing calcium, barium and magnesium with the following chemical composition, %: Ca — 11–15, Si — 50–55, Al — 12–20, P — 0,06, S — 0,02, Mg — 1,2, Ba — 1,3 and Fe is the rest. This ferroalloy was obtained as a result of large-scale laboratory tests simulating industrial conditions at the experimental site of Chemical and Metallurgical Institute named after Zh. Abishev. Efficiency of application of each new ferroalloy for deoxidation, microalloying and steel modification is determined primarily by its various characteristics (chemical and phase composition, mineralogy, thermal properties, etc.). Correspondingly, the current research is based on different studies that were carried out for the obtained calcium-containing ferroalloy, including the following ones: investigation of the phase composition by X-ray phase analysis, study of phase transformations during heating by the differential thermal analysis, determination of mineralogical composition and density by metallographic studies and by the pycnometer method.

Presented results were obtained during execution of the scientific and technical program No. BR05236708 “Scientific and technological substantiation of widening of raw material base of the ferroalloy industry owing to involvement of slightly coking power generating coals and man-caused wastes in order to receive the new materials of multi-purpose destination”, within the framework of the contract for the programmed and aimed investment for 2018–2020 with the Scientific Committee of the Ministry of Education and Science of Kazakhstan Republic and grant investment of the scientific researches for 2018–2020 with the Scientific Committee of the Ministry of Education and Science of Kazakhstan Republic on the theme АР05130225.

keywords Complex ferroalloys, alkaline earth metals, smelting in an ore smelting furnace, thermodynamic diagram analysis, microstructure, X-ray phase analysis, calcium-containing ferroalloys
References

1. Bigeev V. A., Vdovin K. N., Kolokoltsev V M. Grounds of metallurgical production : a manual. St. Petersburg. Lan. 2017. 614 p.
2. Cherednichenko M. V., Zuev S. P. Ferroalloy industry waste processing. 13th International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2018. Novosibirsk. 12-14 December 2018. IOP Conference Series: Materials Science and Engineering. 2019. Vol. 560. Issue 1. No. 012134.
3. Leontyev L. I., Smirnov L. A., Zhuchkov V. I. et al. Status and Prospects of Ferroalloys Production in the Russian Federation. Metallurgist. 2016. Vol. 59. No. 11-12. pp. 1001–1006.
4. G. Yu. Boyarko, B. N. Matveev. The raw material base of ferroalloys and features of development of their production in Russia. Part 2. Microalloying ferroalloys. Chernye metally. 2020. No. 2. pp. 15–20.
5. Zhuchkov V. I., Gasik M. I., Sheshukov O. Yu Development of rational composition of ferroalloys for steel and iron processing. Collection of lectures of the Foundry Consilium No. 2 “Theory and practice of metallurgical processes in iron and steel castings production”. Chelyabinsk: Chelyabinskiy dom pechati. 2007. p. 88.
6. Gizatulin R. A., Valuev D. V., Edesheva Ch. V. Technology of metal complex processing by calcium and aluminium during tapping. Sovremennye problemy nauki i obrazovaniya. 2014. No. 2. pp. 32–35.
7. Shulga V. O. On efficiency of steel complex deoxidation. Tekhnologicheskiy audit i rezervy proizvodstva. 2012. No. 2. pp. 15–16.
8. Rybenko I. A., Nokhrina O. I., Rozhikhina I. D., Golodova M. A., Tsymbal V. P. Development of resource-saving technologies of steel direct alloying on the basis of thermodynamic modeling of metals recovery processes in elementary systems. Izvestiya vuzov. Chernaya metallurgiya. 2017. Vol. 60. No. 2. pp. 91–98.
9. Ryabchikov I., Kovalev V. Prospects of barium-containing ferroalloys production and application for non-furnace treatment of steel and cast iron. Journal of Chemical Technology and Metallurgy. 2016. Vol. 51. No. 4. pp. 465–472.
10. Pan H. C., Huang Q. Y., Qin G. W., Fu H. Activations of stacking faults in the calcium-containing magnesium alloys under compression. Journal of alloys and compounds. 2017. Vol. 692. pp. 898–902
11. Wang Y. W., Zhao K., Peng J. P. Di Y. Z., Li Y. L., Song Y., Deng X. Z. Process of producing magnesium by thermal vacuum reduction using silicocalcium as reductant. Rare metals. 2016. Vol. 35. No. 7. pp. 571–575.
12. Appolonov A. A. Effects of alkaline and rare-earth metals on the ductile properties of 35GTRL steel. Liteinoe Proizvodstvo. 2004. No. 1. pp. 11–12.
13. Lozovaya E. Yu., Sheshukov O. Yu., Zhuchkov V. I., Vinogradov S. V. Metallurgy of steel and ferroalloys melting of silicocalcium introduced in liquid steel. Steel in Translation. 2005. Vol. 35. No. 12. pp. 16–19.
14. Grigorovich K. V., Demin K. Y., Arsenkin A. M., Garber A. K. Prospects of the application of barium-bearing master alloys for the deoxidation and modification of a railroad metal. Russian Metallurgy (Metally). 2011. No. 9. pp. 912–920.
15. Makhambetov E. N., Baisanov A. S., Isagulov A. Z., Grigorovich K. V., Timirbayeva N. R. Production of Complex Calcium-Containing Ferrous Alloys of Waste Smelter Slags and High-Ash Coals. Steel in Translation. 2019. Vol. 49. No. 10. pp. 698–702.

Full content Research of physical and chemical characteristics of the new complex calcium-containing ferroalloy
Back