Journals →  CIS Iron and Steel Review →  2020 →  #1 →  Back

Powder Metallurgy and Additive Technologies
ArticleName Analytical description of metal plasticity at shift
DOI 10.17580/cisisr.2020.01.13
ArticleAuthor V. N. Shinkin
ArticleAuthorData

National Research University of Technology “MISiS” (Moscow, Russia):

V. N. Shinkin, Dr. Phys.-Math., Professor, E-mail: shinkin-korolev@yandex.ru

Abstract

The theory of elasticity, which is one of the departments of mechanics, is currently the basis for the design of all engineering structures in which elastic deformations have to be taken into account. It became the exact science only after the gradual development for more than two hundred years. Over the past few decades, the valuable information has been obtained about the non-elastic materials − the mechanical properties of plastic metals and the conditions under which the solid bodies are destroyed. However, the most satisfactory understanding of the plastic condition of materials and the report on the conditions, under which the destruction occurs, were achieved only after the crystal structure of metals and alloys, the mechanical and thermal history of the metal semi-finished products (rods and sheets) from the time of casting of ingots and ending with the annealing of finished products were alone with great care studied in the wide physical terms. The study of the plastic state of matter is currently of interest to many branches of science and technology. Thus, it is desirable for metallurgists to control more precisely the processes of deformation of metals at high temperatures. Since the rolling mills currently use huge amounts of energy, it is necessary to use the energy more economically. On the other hand, in order to choose the right materials for the different parts of machines, the designer must carefully consider the mechanical properties of these materials. He is not only interested in knowing as accurately as possible the ultimate stresses, at which the parts of machines should be expected to risk plastic deformation, destruction or cracking due to fatigue, but in many cases he wants to take into account the possible deformation of the parts of machines, that are subjected to the long-term forces. If the deformations are elastic, then the designer can base his calculations on the theory of elasticity, but he lacks such a reliable basis when moving from the elastic deformations to the plastic deformations or when figuring out the conditions, under which the fracture occurs.

keywords Shear stress, shift, thin-walled tube, tube torsion, Huber-Mises’s condition, Tresca-Saint-Venant’s condition, Nadai’s and Ludwik’s descriptions
References

1. Buhan P., Bleyer J., Hassen G. Elastic, plastic and yield design of reinforced structures. Elsevier Science. 2017. 342 p.
2. Del Piero G. A variational approach to fracture and other inelastic phenomena. Springer. 2014. 90 p.
3. Silberschmidt V. V. Dynamic deformation, damage and fracture in composite materials and structures. Elsevier Science. 2016. 810 p.
4. Shinkin V. N. Simple analytical dependence of elastic modulus on high temperatures for some steels and alloys. CIS Iron and Steel Review. 2018. Vol. 15. pp. 32−38.
5. Shinkin V. N. Springback coefficient of round steel beam under elastoplastic torsion. CIS Iron and Steel Review. 2018. Vol. 15. pp. 23−27.
6. Sadd M. H. Continuum mechanics modeling of material behavior. Academic Press. 2018. 432 p.
7. Hashiguchi K. Foundations of elastoplasticity: Subloading surface model. Springer. 2017. 819 p.
8. Simo J. C., Hughes T. J. R. Computational inelasticity. Springer. 2013. 392 p.
9. Belskiy S., Mazur I., Lezhnev S., Panin E. Distribution of linear pressure of thin-sheet rolling across strip width. Journal of Chemical Technology and Metallurgy. 2016. Vol. 51. No. 4. pp. 371–378.
10. Belskiy S. M., Yankova S., Chuprov V. B., Bakhaev K. V., Stoyakin A. O. Temperature field of stripes under hot rolling. Journal of Chemical Technology and Metallurgy. 2015. Vol. 50. No. 6. pp. 613–616.
11. Barenblatt G. I. Flow, deformation and fracture. Cambridge Academ. 2014. 276 p.
12. Fedorov V. A., Ushakov I. V., Permyakova I. E. Mechanical properties and crystallization of an annealed cobalt-based amorphous alloy. Russian Metallurgy (Metally). 2004. No. 3. pp. 293−297.
13. Ushakov I. V., Fedorov V. A., Permyakova I. E. Determination of metal glass plasticity by microindentation on substrates. Zavodskaya Laboratoriya. Diagnostika Materialov. 2003. Vol. 69. No. 7. pp. 43−47.
14. Shinkin V. N. Elastoplastic flexure of round steel beams. 1. Springback coefficient. Steel in Translation. 2018. Vol. 48. No. 3. pp. 149−153.
15. Shinkin V. N. Elastoplastic flexure of round steel beams. 2. Residual Stress. Steel in Translation. 2018. Vol. 48. No. 11. pp. 718−723.
16. Besdo D., Stein E. Finite inelastic deformations: Theory and applications. Springer. 2012. 556 p.
17. Hutter K., Baaser H. Deformation and failure in metallic materials. Springer. 2013. 409 p.
18. Jog C. S. Continuum mechanics: Foundations and applications of mechanics. Vol. 1. Cambridge University Press. 2016. 873 p.
19. Koinov T., Bel’skii S. M., Mukhin Y. A., Chuprov V. B. Influence of bending efforts of working rolls on widening of the thin steel strip during hot rolling. Izvestiya Ferrous Metallurgy. 2018. Vol. 61. No. 5. pp. 348−356.
20. Belskii S. M., Shopin I. I. Parametrical model of stress-strain state of the roll on a coiler. Izvestiya Ferrous Metallurgy. 2017. Vol. 60. No. 11. pp. 925−931.
21. Anandarajah A. Computational methods in elasticity and plasticity: Solids and porous media. Springer. 2010. 668 p.
22. Dvorak G. J. Inelastic deformation of composite materials. Springer. 2011. 779 p.
23. Fan J. Multiscale analysis of deformation and failure of materials. Wiley. 2010. 512 p.
24. Shinkin V. N. Preliminary straightening of steel strip. Chernye Metally. 2018. No. 5. pp. 34−40.
25. Shinkin V. N. Direct and inverse non-linear approximation of hardening zone of steel. Chernye Metally. 2019. No. 3. pp. 32−37.
26. Cowin S. C. Continuum mechanics of anisotropic materials. Springer. 2013. 438 p.
27. Messerschmidt U. Dislocation dynamics during plastic deformation. Springer. 2010. 516 p.
28. Bazant Z. P., Cedolin L. Stability of structures: Elastic, inelastic, fracture and damage theories. World Scientific Publishing. 2010. 1040 p.
29. Fedorov V. A., Ushakov I. V. Effect of annealing on the deformation and fracture of metallic glass under local loading. Technical Physics. 2001. Vol. 46. No. 6. pp. 673−676.
30. Muhin U., Belskij S., Koynov T. Study of the influence between the strength of antibending of working rolls on the widening during hot rolling of thin sheet metal. Frattura ed Integrita Strutturale. 2016. Vol. 10. No. 37. pp. 318−324.
31. Muhin U., Belskij S., Makarov E., Koynov T. Simulation of accelerated strip cooling on the hot rolling mill run-out roller table. Frattura ed Integrita Strutturale. 2016. Vol. 10. No. 37. pp. 305−311.
32. Fedorov V. A., Ushakov I. V., Permyakova I. E. Deformation and fracture features of annealed metallic glass ribbons of a Co–Fe–Cr–Si system during microindentation. Bulletin of the Russian Academy of Sciences: Physics. 2005. Vol. 69. No. 9. pp. 1537−1542.
32. Butazzo G., Galdi G. P., Lanconelli E., Pucci P. Nonlinear analysis and continuum mechanics. Springer. 2011. 148 p.

Full content Analytical description of metal plasticity at shift
Back