Журналы →  Tsvetnye Metally →  2020 →  №7 →  Назад

Название Recovery of lithium from oil and gas field brines
DOI 10.17580/tsm.2020.07.03
Автор Karshigina Z. B., Abisheva Z. S., Bochevskaya E. G., Toilanbay G. A.
Информация об авторе

Satbayev University, Institute of Metallurgy and Ore Beneficiation, Almaty, Republic of Kazakhstan:

Z. B. Karshigina, Leading Researcher, Laboratory of Rare Scattered Elements, PhD
Z. S. Abisheva, Professor, Doctor of Technical Sciences, Academician at the National Academy of Sciences of the Republic of Kazakhstan
E. G. Bochevskaya, Head of the Rare Scattered Elements Laboratory, Candidate of Technical Sciences, Associate Professor
G. A. Toilanbay, Leading Engineer, Laboratory of Rare Scattered Elements

Corresponding author: Z. S. Abisheva, e-mail: abisheva_z@mail.ru


This paper describes the results of a study that looked at ways to extract lithium while processing oil and gas field brines. A limestone method was applied to remove magnesium from the brines. The authors tried to understand how the process temperature and the amount of lime used influence the purification efficiency. Optimum process parameters were identified: temperature 20–40 °С, the amount of lime ~100–110 %. The resultant brine had a pH level of 11–11.5 and the purification efficiency reached 99.80–99.96 %. A study was carried out to examine the chemisorption of lithium from formation brines on as-precipitated aluminium hydroxides in the following conditions: t = 50 °С; brine concentration – 120 g/dm3 AlCl3; Li/Al molar ratio = 7; рНequi 8.0–8.8; soak period – 1, 2, 3 and 4 h. As-precipitated aluminium hydroxides were produced by pouring the aluminium chloride solution to the brine where it reacted with hydrated tricalcium aluminate. The paper looked at the relationship between the soak period after the aluminium chloride solution pouring and the lithium recovery. The recovery of lithium from brine on the as-precipitated aluminium hydroxides with the soak period being 1 hour was 71 %. No gain to the lithium recovery can be achieved when the soak period exceeds 1 hour. On the contrary, this can affect the adsorption activity of the as-precipitated aluminium hydroxides. The lithium adsorption capacity was calculated, as well as the distribution and separation coefficients for lithium and associated components. With the soak period being 1 hour, the lithium adsorption capacity of the as-precipitated aluminium hydroxides was 5.9 mg/g. Aluminium hydroxide deposits were analyzed after chemisorption with the help of X-ray phase analysis. The following phases were found in them: bayerite, nordstrandite, gibbsite (hydrargillite) and phases resulting from the chemisorption of lithium on aluminium hydroxide – i.e. hydrated double aluminium hydroxide with lithium chloride LiCl·2Al(OH)3·xH2O.
This research study was funded under the Grant АР05132075 by the Ministry of Education and Science of the Republic of Kazakhstan.

Ключевые слова Brine, lithium, sorption, precipitation, sorbent, aluminium hydroxide, purification, recovery
Библиографический список

1. Choubey P. K., Chung K.-S., Kim M.-S., Lee J.-C., Srivastava R. R. Advance review on the exploitation of the prominent energy-storage element Lithium. Part II: From sea water and spent lithium ion batteries (LIBs). Minerals Engineering. 2017. Vol. 110. pp. 104–121.
2. Choubey P. K., Kim M. S., Srivastava R. R., Lee J.-C., Lee J. Y. Advance review on the exploitation of the prominent energy-storage element: Lithium. Part I: from mineral and brine resources. Minerals Engineering. 2016. Vol. 89. pp. 119–137.
3. Bian S., Li D., Gao D., Peng J., Dong Y., Li W. Hydrometallurgical processing of lithium, potassium, and boron for the comprehensive utilization of Da Qaidam lake brine via natural evaporation and freezing. Hydrometallurgy. 2017. Vol. 173. pp. 80–83.
4. Yoshinaga T., Kawano K., Imoto H. Basic study on lithium recovery from lithium containing solution. Bulletin of the Chemical Society of Japan. 1986. Vol. 59. pp. 1207–1213.
5. Abe M., Hayashi K. Synthetic inorganic ion-exchange materials. XXXIV. Selective separation of lithium from seawater by tin (IV) antimonate cation exchanger. Hydrometallurgy. 1984. Vol. 12. pp. 83–93.
6. Amer A. M. The hydrometallurgical extraction of lithium from Egyptian montmorillonite-type clay. JOM. 2008. Vol. 60, No. 10. pp. 55–57.
7. An J. W., Kang D. J., Tran K. T., Kim M. J., Lim T., Tran T. Recovery of lithium from Uyuni salar brine. Hydrometallurgy. 2012. Vol. 117–118. pp. 64–70.
8. Ho P. C., Nelson F., Kraus K. A. Adsorption on inorganic materials: VII. Hydrous tin oxide and SnO2 filled carbon. Journal of Chromatography A. 1978. Vol. 147. pp. 263–269.
9. Bukowsky H., Uhlemann E., Steinborn D. The recovery of pure lithium chloride from “brines” containing higher contents of calcium chloride and magnesium chloride. Hydrometallurgy. 1991. Vol. 27, No. 3. pp. 317–325.
10. Kitajo A., Suzuki T., Nishihama S., Yoshizuka K. Selective recovery of lithium from seawater using a novel MnO2 type adsorbent II - enhancement of lithium ion selectivity of the adsorbent. Ars Separatoria Acta. 2003. Vol. 2. pp. 97–106.
11. Ooi K., Miyai Y., Sakakihara J. Mechanism of Li+ insertion in spinel-type manganese oxide. Redox and ion-exchange reactions. Langmuir. 1991. Vol. 7. pp. 1167–1171.
12. Umeno A., Miyai Y., Takagi N., Chitrakar R., Sakane K., Ooi K. Preparation and adsorptive properties of membrane-type adsorbents for lithium recovery from seawater. Industrial & Engineering Chemistry Research. 2002. Vol. 41, No. 17. pp. 4281–4287.
13. Yoshizuka K., Fukui K., Inoue K. Selective recovery of lithium from seawater using a novel MnO2 type adsorbent. Ars Separatoria Acta. 2002. Vol. 1. pp. 79–86.
14. Sorour M. H., Hani H. A., El-Sayed M. M. H., Mostafa A. A., Shaalan H. F. Synthesis, Characterization and Performance Evaluation of Lithium Manganese Oxide Spinels for Lithium Adsorption. Egyptian Journal of Chemistry. 2017. Vol. 60, No. 4. pp. 697–710.
15. Menzheres L. T., Ryabtsev A. D., Mamylova E. V., Kotsupalo N. P. Method of preparing sorbent for recovering lithium from brines. Patent RF, No. 2223142. Applied: 22.11.2001. Published: 10.02.2004. Bulletin No. 4.
16. Menzheres L. T., Kotsupalo N. P. LiCl·2Al(OH)3·mH2O absorbent grains. Zhurnal prikladnoy khimii. 1999. Vol. 72, Iss. 10. pp. 1623–1627.
17. Ryabtsev A. D., Menzheres L. T., Kotsupalo N. P., Serikova L. A. Zero-waste production of LiCl·2Al(OH)3·mH2O absorbent grains. Khimiya v interesakh ustoychivogo razvitiya. 1999. Iss. 7. pp. 343–349.
18. Menzheres L. T., Kotsupalo N. P., Orlova L. B. Method to produce absorbent grains. Patent RF, No. 2050184. Applied: 11.02.1993. Published: 20.12.95. Bulletin No. 35.
19. Kotsupalo N. P. Prospective production of lithium compounds from natural chloride brines. Khimiya v interesakh ustoychivogo razvitiya. 2001. No. 9. pp. 243–253.
20. Menzheres L. T., Ryabtsev A. D., Mamylova E. V. A selective sorbent for extracting lithium from highly mineralized chloride brines. Izvestiya Tomskogo politekhnicheskogo universiteta. 2004. Vol. 307, No. 7. pp. 76–80.
21. Kotsupalo N. P., Ryabtsev A. D. The chemistry and technology behind lithium compounds produced from lithium-bearing hydromineral raw materials. Novosibirsk : Geo, 2008. 291 p.
22. Hawash S., Kader E., Diwani D. Methodology for selective adsorption of lithium ions onto polymeric aluminium (III) hydroxide. Journal of American Science. 2010. Vol. 6, No. 11. pp. 301–309.
23. Ramazanov A. Sh., Kasparova M. A., Saraeva I. V., Ataev D. R., Akhmedov M. I., Kamalutdinova I. A. Extraction of lithium from geothermal chloride waters by sorption. Herald of the Daghestan Scientific Center. 2010. No. 37. pp. 23–28.
24. Lanina T. D., Litvinenko V. I., Varfolomeev V. G. Processing of hydrocarbon deposit waters. Ukhta : UGTU, 2006. 172 p.
25. Karshigina Z. B., Bochevskaya Ye. G., Abisheva Z. S., Akcil A., Kan S. M., Absametov M. K., Berstenyov S. V. Sorption methods of processing of hydromineral lithium raw material of Kazakhstan. News of the Academy of Sciences of the Republic of Kazakhstan. Series of Geology and Technical Sciences. 2019. Vol. 4, No. 436. pp. 172–180.
26. GOST 8677–76. Reagents. Calcium oxide. Specifications. Introduced: 01.07.1977.
27. GOST 8050–85. Gaseous and liquid carbon dioxide. Specifications. Introduced: 01.01.1987.
28. GOST 3118–77. Reagents. Hydrochloric acid. Specifications. Introduced: 01.01.1979.
29. GOST 24147–80. Super pure ammonia aqueous solution. Specifications. Introduced: 01.01.1981.
30. Voldman G. M., Zelikman A. N. Theory of hydrometallurgical processes: A guide for university students. Moscow : Intermet Inzhiniring, 2003. 464 p.
31. Chalyi V. P. Metal hydroxides. Kiev : Naukova dumka, 1972. 141 p.

Language of full-text русский
Полный текст статьи Получить