Journals →  Tsvetnye Metally →  2015 →  #1

Tsvetnye Metally


This issue includes the articles in the subject area of heavy, light and rare metals. This journal shares the problems of theory and practice of ore concentration, production and processing of non-ferrous metals, economics and management of production.


The issue includes the review of global non-ferrous metals' market for 2014.


The section «Economics and management of production» includes the article by B. A. Kotlyar.


On the basis of analysis of these enterprises of mining-metallurgical complex, this article shows the following factors:

- reasonability of definition of provisional rules of minimal wage in sectoral tariff agreement;

- necessity of keeping of operating tariffing of workers and works as the stimulus of growth of workers' qualification;

- substantiation of obligation of decreasing of number of low-qualified personnel.


The section «Heavy non-ferrous metals» includes the article by Yu. V. Vasilev, O. V. Zotikov, O. I. Platonov and L. Sh. Tsemekhman about the analysis of the current state and near-term outlook of development of industrial technology of sulfur obtaining from metallurgical sulfurous gases, containing sulfur dioxide.


The section «Light metals, carbon materials» shows the article by A. P. Lysenko and A. Yu. Nalivayko, where the formation mechanism of aluminium hydroxide sediment in experimental-industrial electrolyser is shown together with influence of various current-carrying reagents on process indicators.

You may find below more details about the issue or book printed or electronic version of the journal.

ArticleName International review of market of non-ferrous metals
ArticleAuthor Korneev S. I.

Korneev S. I., Senior Analyst of "Managing Company "Metalloinvest" LLC, e-mail:

ArticleName Minimal wage as an institution of labor and metal products market. Part 2
ArticleAuthor Kotlyar B. A.

Consultation-Analytic Center “TSNOTORGMET”, Moscow, Russia:

Kotlyar B. A., Chief Executive Officer1, e-mail:

ArticleName Peculiarities of influence of copper, zinc and iron cations on flotability of pyrite of one of copper-zinc Ural deposits
ArticleAuthors Goryachev B. E., Naing Linoo, Nikolaev A. A., Polyakova Yu. N.

Departmetn of Mineral Processing and Technogenic Raw Materials, National University of Science and Technology “MISiS”, Moscow, Russia:

B. E. Goryachev, Professor

Naing Linoo, Post-Graduate Student

A. A. Nikolaev, Associate Professor1, e-mail:

Yu. N. Polyakova, Holder of a Master's Degree

ArticleName Achievements and problems of industrial technology of sulphur production from metallurgical sulphurous gases
ArticleAuthors Vasilev Yu. V., Zotikov O. V., Platonov O. I., Tsemekhman L. Sh

LLC “Institute “Gipronikel”, Saint Petersburg, Russia:

Yu. V. Vasilev, Leading Researcher

O. I. Platonov, Former Leading Researcher, e-mail:

L. Sh. Tsemekhman, Former Head of Pyrometallurgical Laboratory


Polar Division of LLC “Institute “Gipronikel”, Norilsk, Russia:

O. V. Zotikov, Director

ArticleName Thermal physic peculiarities of Waelz process of slag components in rotary furnace. Part 2
ArticleAuthors Panshin A. M., Matyukhin V. I., Kozlov P. A., Matyukhin O. V.

LLC “UMMC-Holding”, Verkhnyaya Pyshma, Russia:

A. M. Panshin, Technical Director


Ural Federal University named after the first president of Russia B. N. Yeltsin, Ekaterinburg, Russia:

V. I. Matyukhin, Assistant Professor, Chair of Thermal Physics and Informatics in Metallurgy, e-mail:

O. V. Matyukhin, Assistant Professor


JSC “Chelyabinsk zinc plant”, Chelyabinsk, Russia:

P. A. Kozlov, Head of Engineering Center

ArticleName Copper-smelting production slags and their impact on refractories
ArticleAuthors Kashcheev I. D., Zemlyanoy K. G., Nevedimov V. N., Garenskikh I. O.

Ural Federal University named after the first president of Russia B. N. Yeltsin, Ekaterinburg, Russia:

I. D. Kashcheev, Head of a Chair of Chemical Technology of Ceramics and Refractories

K. G. Zemlyanoy, Senior Lecturer, Chair of Chemical Technology of Ceramics and Refractories, e-mail:

V. N. Nevedimov, Assistant Professor, Chair of Theory of Metallurgical Processes 

I. O. Garenskikh, Student, Chair of Heavy Non-Ferrous Metals Metallurgy 

ArticleName Theoretical development of basis of liquation refining of lead
ArticleAuthors Dzhuraev T. D., Khodzhaev F. K., Gazizova E. R., Muslimov I. Sh.

Tajikistan University of Technology named after Academician M. S. Osimi, Dushanbe, Republic of Tajikistan:

T. D. Dzhuraev, Professor, e-mail:

F. K. Khodzhaev, Assistant

E. R. Gazizova, Assistant Professor

I. Sh. Muslimov, Assistant Professor, Chair of Metallurgy of Non-Ferrous Metals

ArticleName Kinetics of autoclave oxidation of refractory gold-containing sulfide concentrates
ArticleAuthors Shneerson Ya. M., Markelov A. V., Chugaev L. V., Kabisova A. S.

LLC “Scientific-research center “Gidrometallurgiya”, Saint-Petersburg, Russia:

Ya. M. Shneerson, Chief Executive Officer

A. V. Markelov, Researcher

L. V. Chugaev, Leading Researcher

A. S. Kabisova, Engineer

ArticleName Research and development of technology of two-stage melting of lead-containing silver-zinc accumulators
ArticleAuthor Rogov S. I.

JSC “Shchyolkovo plant of secondary precious metals”, Shchyolkovo, Russia:

S. I. Rogov, Director of Economic Affairs, e-mail:

ArticleName Adsorptive ability of metallurgical alumina during the fluoride emission from cryolite melt surface
ArticleAuthors Vlasov A. A., Bazhin V. Yu., Pyaterneva A. A.

National Mineral Resources University, Saint Petersburg, Russia:

A. A. Vlasov, Assistant of a Chair of Metallurgy

V. Yu. Bazhin, Dean of Chemical-Metallurgical Faculty, e-mail:

A. A. Pyaterneva, Post-Graduate Student, Chair of Metallurgy

ArticleName Mechanism of obtaining of aluminum hydroxide in electrolytic cell and coagulation of fine dispersed particles into larger particles during sedimentation in conducting saline solutions
ArticleAuthors Lysenko A. P., Nalivayko A. Yu.

Chair of Non-Ferrous Metals and Gold, National University of Science and Technology “MISiS”, Moscow, Russia:

A. P. Lysenko, Assistant Professor, e-mail:

A. Yu. Nalivayko, Leading Electronics Engineer

ArticleName Preliminary heating of calcined anode
ArticleAuthors Kondratev V. V., Ershov V. A., Shakhray S. G., Ivanov N. A.

Irkutsk National Research Technical University, Irkutsk, Russia:

V. V. Kondratev, Assistant Professor of a Chair of Quantum Physics and Nanotechnologies

V. A. Ershov, Assistant Professor of a Chair of Automation of Industrial Processes, e-mail:

N. A. Ivanov, Director of Physical-Technical Institute

Siberian Federal University, Krasnoyarsk, Russia:

S. G. Shakhray, Assistant Professor of a Chair of Technosphere Safety of Mining and Metallurgical Production

ArticleName Prospects of intensification of silica and chlorination process
ArticleAuthors Pruttskov D. V., Shvartsman L. Ya., Krivoruchko N. P.

JSC “Tekhnokhim”, Zaporozhye, Ukraine:

D. V. Pruttskov, Scientific Consultant

L. Ya. Shvartsman, Head of a Group

N. P. Krivoruchko, Consultant, e-mail:

ArticleName Research of phase composition of mechanically automated mixtures Cr – Al – Si – B and obtained SHS-products
ArticleAuthors Patsera E. I., Kurbatkina V. V., Levashov E. A., Umarov L. M.

National University of Science and Technology “MISiS”, Moscow, Russia:

E. I. Patsera, Researcher, e-mail:

V. V. Kurbatkina, Leading Researcher

E. A. Levashov, Head of a Chair of Powder Metallurgy and Functional Coatings


Institute of Structural Macrokinetics and Materials Science of Russian Academy of Sciences, Chernogolovka, Russia:

L. M. Umarov, Senior Researcher

ArticleName Selective laser melting of heat-resistant nickel alloy
ArticleAuthors Sufiiarov V. Sh., Popovich A. A., Borisov E. V., Polozov I. A.

Saint-Petersburg State Polytechnical University, Saint-Petersburg, Russia:

V. Sh. Sufiiarov, Leading Researcher, e-mail:

A. A. Popovich, Director of Institute of Metallurgy, Mechanical Engineering and Transport

E. V. Borisov, Post-Graduate Student, Researcher

I. A. Polozov, Engineer

ArticleName Peculiarities of melting and casting of boron-containing aluminum-matrix composites based on 6xxx alloys
ArticleAuthors Kurbatkina E. I., Belov N. A., Alabin A. N., Sidun I. A.

National University of Science and Technology “MISiS”, Moscow, Russia:

E. I. Kurbatkina, Engineer

N. A. Belov, Professor, Director of Engineering Center “Innovation Casting Technologies and Materials”

A. N. Alabin, Head of Department of Engineering Center “Innovation Casting Technologies and Materials”

I. A. Sidun, Holder of a Master's Degree

ArticleName Mn – Al hard magnetic alloys
ArticleAuthors Alymov M. I., Milyaev I. M., Nurislamov A. Kh., Yusupov V. S.

Institute of Structural Macrokinetics and Materials Science of Russian Academy of Sciences, Chernogolovka, Russia:

M. I. Alymov, Director


A. A. Baikov Institute of Metallurgy and Materials Science of Russian Academy of Sciences, Moscow, Russia:

I. M. Milyaev, Leading Researcher

V. S. Yusupov, Head of Laboratory

Institute for Metals Superplasticity Problems of Russian Academy of Sciences, Ufa, Russia:

A. Kh. Nurislamov, Leading Engineer

ArticleName Achievement of the target goal. Life principles and successes of Anatoliy Sysoev
ArticleAuthor Ivanchenko A. V.
Journals →  Tsvetnye Metally →  2015 →  #1