Журналы →  Non-ferrous Metals →  2017 →  №2

Non-ferrous Metals



The second issue of «Non-ferrous Metals» journal tells about the scientific investigations in various fields of non-ferrous metallurgy. These investigations touch the most urgent problems and prospective issues of metal and alloy science development. Also, MISiS university published various articles considering metal science. Members of Siberian Federal University carried out a large work in metal processing modeling.


You may find below more details about the issue or book printed or electronic version of the journal.


BENEFICATION
Название Synthesis of sodium polysulphide for copper ore processing
Авторы Osserov T. B., Ketegenov T. A., Guseynova G. D., Chepushtanova T. A.
Информация об авторах

Satbayev University, Almaty, Kazakhstan:

T. B. Osserov, PhD Student, e-mail: x_tios_x@mail.ru
G. D. Guseynova, Associate Professor
T. A. Chepushtanova, Associate Professor


Al-Farabi Kazakh National University, Almaty, Kazakhstan:

T. A. Ketegenov, Professor

 

P. Balaz (Slovak Academy of Sciences, Slovakia) and K. K. Mamyrbaeva (Satbayev University, Kazakhstan) were also the participants in this work.

Название On the issue of loparite ore as a source of rare-metal and rare-earth elements and increasing its dressing efficiency
Авторы Alekseeva S. A., Tereshchenko S. V., Pavlishina D. N., Rukhlenko E. D.
Информация об авторах

Mining Institute of the Kola Science Centre of the Russian Academy of Sciences, Apatity, Russia:

S. A. Alekseeva, Research Assistant, e-mail: alekseeva@goi.kolasc.net.ru
E. D. Rukhlenko, Chief Production Engineer

 

Apatity Branch of the Murmansk Arctic State University, Apatity, Russia:

S. V. Tereshchenko, Professor, Head of a Chair of Mining Engineering, Earth Sciences and Environmental Engineering
D. N. Pavlishina, Manager of Research Laboratory

HEAVY NON-FERROUS METALS
Название Ultra-pure Cu obtaining using zone melting: influence of liquid zone width on impurities’ behavior
Авторы Dosmukhamedov N. K., Zholdasbay E. E., Nurlan G. B.
Информация об авторах

Kazakh National Research Technical University named after K. I. Satpayev, Almaty, Kazakhstan:

N. K. Dosmukhamedov, Professor of a Chair “Metallurgy and Dressing of Mineral Resources”, e-mail: nurdos@bk.ru
E. E. Zholdasbay, Senior Researcher of a Chair “Metallurgy and Dressing of Mineral Resources”
G. B. Nurlan, Engineer of a Chair “Metallurgy and Dressing of Mineral Resources”

Название Remediation in conditions of an operating copper-nickel plant: results of perennial experiment
Авторы Slukovskaya M. V., Kremenetskaya I. P., Ivanova L. A., Vasilieva T. N.
Информация об авторах

I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials, Kola Science Center of the Russian Academy of Sciences, Apatity, Russia:

M. V. Slukovskaya, Senior Researcher, e-mail: krem.mv@gmail.com
I. P. Kremenetskaya, Senior Researcher
T. N. Vasilieva, Senior Researcher

 

N. A. Avrorin Polar-Alpine Botanical Garden-Institute, Kola Science Center of the Russian Academy of Sciences, Apatity, Russia:

L. A. Ivanova, Head of Laboratory

RARE METALS, SEMICONDUCTORS
Название Sorption of non-ferrous metal cations on hydrated titanium dioxide
Авторы Maslova M. V., Gerasimova L. G.
Информация об авторах

I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials (Kola Science Center, RAS), Apatity, Russia:

M. V. Maslova, Leading Researcher, e-mail: maslova@chemy.kolasc.net.ru
L. G. Gerasimova, Chief Researcher

Название Synthesis of a titanium (IV)-based sorbent and potentialities of its usage for extracting cations of non-ferrous metals
Авторы Gerasimova L. G., Nikolaev A. I., Maslova M. V., Shchukina E. S.
Информация об авторах

Establishment of the Russian Academy of Sciences I. V. Tananaev Institute of Chemistry and Technology of Rare Elements and Mineral Raw Materials of the Kola Science Centre of the Russian Academy of Sciences, Apatity, Russia:

L. G. Gerasimova, Chief Research Assistant, e-mail: gerasimova@chemy.kolasc.net.ru
A. I. Nikolaev, Head of Laboratory
M. V. Maslova, Leading Research Assistant
E. S. Shchukina, Research Assistant

MATERIAL SCIENCE
Название Effect of Fe and Si on the microstructure and phase composition of the aluminium-calcium eutectic alloys
Авторы Belov N. A., Akopyan T. K., Mishurov S. S., Korotkova N. O.
Информация об авторах

National University of Science and Technology MISiS, Moscow, Russia:

N. A. Belov, Professor of the Department of Metal Forming
S. S. Mishurov, Leading Engineer
N. O. Korotkova, Post-Graduate Student of the Department of Metal Forming

 

1National University of Science and Technology MISiS, Moscow, Russia ; 2Baikov Institute of Metallurgy and Materials Science, Moscow, Russia

T. K. Akopyan, Research Fellow1,2, e-mail: aktorgom@gmail.com

Название Analysis of the phase composition and microstructure of a TNM-type alloy by using thermodynamic calculation
Авторы Akopyan T. K., Korotkova N. O., Dolbachev A. P.
Информация об авторах

National University of Science and Technology MISiS, Moscow, Russia:
N. O. Korotkova, Post-Graduate Student of the Department of Metal Forming
A. P. Dolbachev, Engineer of the Department of Metal Forming

 

1National University of Science and Technology MISiS, Moscow, Russia ; 2Baikov Institute of Metallurgy and Materials Science, Moscow, Russia.

T. K. Akopyan, Research Fellow of the Department of Metal Forming1,2, e-mail: nemiroffandtor@yandex.ru

Название Microstructure and phase composition of the eutectic Al – Ca alloy, additionally alloyed with small additives of zirconium, scandium and manganese
Авторы Belov N. A., Batyshev K. A., Doroshenko V. V.
Информация об авторах

National University of Science and Technology MISiS, Moscow, Russia:

N. A. Belov, Professor of the Department of Metal Forming, e-mail: nikolay-belov@yandex.ru
V. V. Doroshenko, Post-Graduate Student of the Department of Metal Forming


Bauman Moscow State Technical University, Moscow, Russia:

K. A. Batyshev, Professor

METAL PROCESSING
Название 3D modeling of combined rolling-extrusion of alloying rods of Al – Ti – B
Авторы Dovzhenko I. N., Dovzhenko N. N., Sidelnikov S. B., Galiev R. I.
Информация об авторах

Siberian Federal University, Krasnoyarsk, Russia:

I. N. Dovzhenko, Assistant Professor, Chair of Metal Forming
N. N. Dovzhenko, Professor, Chair of Metal Forming
S. B. Sidelnikov, Professor, Head of the Chair of Metal Forming
R. I. Galiev, Assistant Professor, Chair of Metal Forming, e-mail: gri1979@mail.ru

E. V. Gladkov took part in this work.

Название 3D modelling of the large-capacity ingots of an Al – Mg system aluminium alloy doped with scandium rolling process
Авторы Dovzhenko I. N., Dovzhenko N. N., Sidelnikov S. B., Konstantinov I. L.
Информация об авторах

Siberian Federal University, Krasnoyarsk, Russia:

I. N. Dovzhenko, Assistant Professor, Chair of Metal Forming
N. N. Dovzhenko, Professor, Chair of Metal Forming
S. B. Sidelnikov, Professor, Head of the Chair of Metal Forming, e-mail: sbs270359@yandex.ru
I. L. Konstantinov, Assistant Professor, Chair of Metal Forming

Журналы →  Non-ferrous Metals →  2017 →  №2