Chernye Metally
In the “Steel Production” section, the higher efficiency of complex microcrystalline modifiers of the INSTEEL® series for reducing steel contamination by non-metallic inclusions of all types is substantiated.
The next section is dedicated to the 80th anniversary of the Nizhny Tagil Metallurgical Plant. The complex for the use of pulverized coal in blast furnace production, which was the first one introduced by EVRAZ NTMK in modern Russia, is presented. The experience of using slag from a desulfurization unit in blast furnace production is described. A technique for removing sulfur from heterogeneous slags, taking into account their ionic structure, is proposed. Based on the results of computer modeling, recommendations are suggested for selection of the optimal ratios of the forging geometric parameters, aimed at reducing the power-energy modes of the equipment and increasing the resistance of the deformation tool is proposed.
The “Rolling and other metal forming processes” section discusses the experience of evaluating the flatness of a thick sheet in the automatic mode, as well as presents the Tebulo`s fnew robotic solution for safe strip cutting.
The “Metal Science and Heat Treatment” section contains information about the successful application of modern digital technologies and artificial intelligence methods in the analysis of microstructures and prediction of the strength properties of steels after various temperature and mechanical influences. The results of the study of the influence of heat treatment on the mechanical properties and resistance to cracking in the hydrogen sulfide environment of structural steel are also presented.
The “Economics and Finance” section discusses the challenges of introducing exchange mechanisms for the ferrous scrap export in the context of the development of electronic commerce, gives practical recommendations for their elimination.
The "From the History of Metallurgy" section is devoted to the production of artillery at the factories and arsenals of Russia in the XVIII - mid XIX centuries. The features of formation of casting steel guns in Russia are shown. The origin of the steel cannon industry in the Russian Empire was reconstructed, which was more promising and replaced arsenal production.
Please find more details below, or order your printed or electronic version of the Journal.
National University of Science and Technology “MISiS”, Novotroitsk affiliate (Novotroitsk, Russia):
A. N. Shapovalov, Cand. Eng., Associate Prof., Head of the Metallurgical Technologies and Equipment Dept., e-mail: alshapo@misis.ru
NPP Technologiya Ltd. (Chelyabinsk, Russia):
V. A. Golubtsov, Cand. Eng., Chief Specialist in Steel
I. V. Bakin, Head of Innovation, Modernization and Technical Development Dept.
I. V. Ryabchikov, Dr. Eng., Professor, Scientific Сonsultant
NPP Sistema48 Ltd. (Lipetsk, Russia):
S. S. Titov, Cand. Eng., General Director, e-mail: algebra934@yandex.ru
Lipetsk State Technical University (Lipetsk, Russia):
V. I. Meshcheryakov, Dr. Eng., Head of the Dept of Electric Drive, e-mail: mesherek@stu.lipetsk.ru
I. O. Leushin, Dr. Eng., Prof., Head of the Dept of Metallurgical Technologies and Equipment, e-mail: igoleu@yandex.ru
Nizhny Novgorod State Technical University named after R. E. Alekseev (Nizhnyi Novgorod, Russia):
O. V. Fedorov, Dr. Eng., Prof., Dept. of Innovation Management, e-mail: fov52@mail.ru
JSC EVRAZ NTMK (Nizhny Tagil, Russia):
A. V. Kushnarev, Dr. Eng., Managing Director, e-mail: Aleksey.Kushnarev@evraz.com
P. N. Kolpakov, Project Management Director, Ural Division
K. V. Mironov, Head of the Blast Furnace Shop
A. A. Forshev, Head of the Sinter-Coke-Blast Furnace Dept., Deputy Head of Technical Management Administration, e-mail: Andrey.Forshev@evraz.com
JSC EVRAZ NTMK (Nizhny Tagil, Russia):
V. V. Temnikov, Head of the Bureau of Iron Ore and Bulk Materials of the Technical Department, e-mail: Vladislav.Temnikov@evraz.com
A. A. Forshev, Head of the Sinter-Coke-Blast Furnace Dept., Deputy Head of Technical Management Administration, e-mail: Andrey.Forshev@evraz.com
E. G. Kalimulina, Chief Specialist of the Bureau of Iron Ore and Bulk Materials of the Technical Dept., e-mail: Elena.Kalimulina@evraz.com
L. P. Babkin, Leading Technological Engineer of the Bureau of Blast Furnace Technical Management, e-mail: Leonid.Babkin@evraz.com
JSC EVRAZ NTMK (Nizhny Tagil, Russia):
M. V. Savelyev, Head of the Prospective Development Dept. of Technical Management Administration,
e-mail: maxim.savelev@evraz.com
Ural Federal University named after the First President of Russia B. N. Yeltsin (Ekaterinburg, Russia):
O. Yu. Sheshukov, Dr. Eng., Prof., Director of the Institute for New Materials and Technologies, e-mail: o.j.sheshukov@urfu.ru
Nizhny Tagil Technological Institute of Technology, Nizhny Tagil branch of the Ural Federal University (Nizhny Tagil, Russia):
A. A. Metelkin, Cand. Eng., Senior Lecturer, Dept. of Metallurgical Technology, e-mail: anatoliy82@list.ru
O. Yu. Shevchenko, Dr. Eng., Head of the Dept. of Metallurgical Technology, e-mail: Shevchenko-OI@ntiustu.ru
Institute of Metallurgy of the Ural Branch of the Russian Academy of Sciences (Ekaterinburg, Russia):
D. K. Egiazaryan, Cand. Eng., Researcher, Pyrometallurgical Laboratory, e-mail: avari@mail.ru
JSC EVRAZ NTMK (Nizhny Tagil, Russia):
A. V. Kushnarev, Dr. Eng., Managing Director, e-mail: Aleksey.Kushnarev@evraz.com
S. S. Puzyrev, Chief Specialist of the Transport Metal Production Technology Bureau, e-mail: Sergey.Puzyrev@evraz.com
JSC EVRAZ NTMK (Nizhny Tagil, Russia):
V. Yu. Rubtsov, Roll Designer of the Rail and Beam Shop, e-mail: Uriylot@mail.ru
V. V. Kurochkin, Roll Designer of the Heavy Section Rolling Shop
Nizhny Tagil Technological Institute of Technology, Nizhny Tagil branch of the Ural Federal University (Nizhny Tagil, Russia):
O. Yu. Shevchenko, Dr. Eng., Head of the Dept. of Metallurgical Technology, e-mail: Shevchenko-OI@ntiustu.ru
Van Norel Journalistiek & Communicatie (Maarn, Netherlands):
H. van Norel, E-mail: henriette@vannorel.com
Perm National Research Polytechnic University (Perm, Russia) :
A. V. Klyuev, Cand. Phys.-Math., Associate Prof., Dept. of Computational Mathematics, Mechanics, and Biomechanics, e-mail: kav@gelicon.biz
V. Yu. Stolbov, Dr. Eng., Head of Dept. of Computational Mathematics, Mechanics and Biomechanics, e-mail: valeriy.stolbov@gmail.com
Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
N. V. Koptseva, Dr. Eng., Professor, Dept. of Foundry Processes and Materials Science, e-mail: kopceva1948@mail.ru
Yu. Yu. Efimova, Cand. Eng., Associate Prof., Dept. of Materials Processing Technologies, e-mail: jefimova78@mail.ru
Vyksa Steel Works (Vyksa, Russia):
V. V. Naumenko, Cand. Eng., Head of the Dept., e-mail: naumenko_vv@vsw.ru
O. A. Baranova, Research Engineer
K. S. Smetanin, Chief Specialist
Bauman Moscow State Technical University (Moscow, Russia):
A. V. Muntin, Cand. Eng., Associate Prof.
Financial University under the RF Government (Moscow, Russia):
G. F. Ruchkina, Dr. Jur., Prof., Head of the Dept. for Legal Regulation of Economic Activities
E. N. Kharitonova, Dr. Econ., Prof., Management Dept.
V. K. Shaidullina, Cand. Jur., Associate Prof., Dept. for Legal Regulation of Economic Activities, Director of the Center for Research and Expertise, e-mail: VKShajdullina@fa.ru
E. L. Vengerovsky, Cand. Jur., Associate Prof., Dept. for Legal Regulation of Economic Activities
G. V. Plekhanov Russian University of Economics, Bryansk branch (Bryansk, Russia):
V. A. Bobkov, Dr. Hist., Associate Prof., Dept. of Theory and History of State and Law and Humanitarian Disciplines, e-mail: vladimir.bobkoff-2009@yandex.ru