Journals →  Chernye Metally →  2020 →  #11

Chernye Metally

The November issue of the journal contains traditional sections, while the Machine-building technologies section is dedicated to the chair for Machine-Building Technology of the Bauman Moscow State Technical University, which celebrated its 90th anniversary. Readers are offered material telling about the history and achievements of the chair, as well as an article presenting a technological approach to programmatic control of the amount of tool feed. It enables to significantly increase the accuracy of processing complex-profile surfaces in conditions of an unevenly distributed allowance. Its use in the processing of miniature cycloidal helical surfaces can significantly reduce the costs of manufacturing enterprises for the technological preparation of the production of articles with cycloidal helical surfaces and expand technological capabilities of CNC milling machines.

Of particular interest is the material from the Economics and Finance section, the authors of which consider a rational way to multiply the development of the Syrian economy, based on the approach of J. M. Keynes. The approach is to choose the most favorable investment application point that can lead to the maximum positive effect. According to the research results, this point (industry) was ferrous metallurgy. The optimal configuration and location have been developed for the construction of an industrial metallurgical cluster, which provides the market with the most popular types of metal products.


Please find more details below, or order your printed or electronic version of the Journal.

Metal science and metallography
ArticleName Quantitative assessment of structural inhomogeneity in cold-resistant low-alloy steel sheets for interpretation of technological features of their manufacturing
ArticleAuthors A. A. Kazakov, D. V. Kiselev, O. V. Sych, E. I. Khlusova

Peter the Great St. Petersburg Polytechnic University:

A. A. Kazakov, Dr. Eng., Prof., Head of the Metallurgical Expertise Laboratory, e-mail:


Thixomet JSC (St. Petersburg, Russia):
D. V. Kiselev, Technical Director


National Research Centre “Kurchatov Institute” – Central Research Institute of Structural Materials “Prometey” (St. Petersburg, Russia):
O. V. Sych, Cand. Eng., Head of the Sector
E. I. Khlusova, Dr. Eng., Prof., Deputy Head of Scientific and Production Centre No. 3 (NPK-3), Head of the Laboratory

E. I. Kazakova participated in this work.

ArticleName Peritectoid carbide transformation based on ε-carbide Fe2C in Fe-C-system alloys. Part 1. Basics of theory
ArticleAuthor S. V. Davydov

Bryansk State Technical University (Bryansk, Russia):

S. V. Davydov, Dr. Eng., Prof., Dept. of Tribotechnical Materials Science and Technology of Materials, E-mail:

ArticleName Phase transformations in iron-carbon alloys doped with rare earth and transition metals
ArticleAuthors A. A. Zhumaev, Yu. N. Mansurov, D. D. Mamatkulov, K. S. Abdullaev

Navoi branch of the Academy of Sciences of Uzbekistan (Navoi, Uzbekistan):

A. A. Zhumaev, Postgraduate Student, E-mail:

Institute of General and Inorganic Chemistry of the Academy of Sciences of Uzbekistan (Tashkent, Uzbekistan):
Yu. N. Mansurov, Dr. Eng., Director, Prof. of the Tashkent State Transport University, E-mail:

Samarkand State Institute of Architecture and Civil Engineering (Samarkand, Uzbekistan):
D. D. Mamatkulov, Dr. Eng., Prof.


Navoi Machine-Building Plant (Navoi, Uzbekistan):
K. S. Abdullaev, Chief Engineer

Rolling and Other Metal Forming Processes
ArticleName Development of a method and equipment for testing materials for alternating bending during piercing in screw rolling mills
ArticleAuthors B. A. Romantsev, A. S. Aleshchenko, E. R. Guseynov, V. Yu. Tsyutsyura

National University of Science and Technology “MISiS” (Moscow, Russia):

B. A. Romantsev, Dr. Eng., Prof., Metal Forming Dept.
A. S. Aleshchenko, Cand. Eng., Head of Metal Forming Dept.
E. R. Guseynov, Engineer, Metal Forming Dept.


Volgograd State Technical University (Volgograd, Russia):

V. Yu. Tsyutsyura, Senior Lecturer, “Materials Technology” Dept., E-mail:

ArticleName Torque at elastic-plastic torsion of sheet-straightening machines’ steel shafts
ArticleAuthor V. N. Shinkin

National University of Science and Technology “MISiS” (Moscow, Russia):

V. N. Shinkin, Dr. Phys.-Math., Prof., E-mail:

Coating and Surface Processing
ArticleName Increasing the corrosion resistance of carbon steel by means of dipinaconborate compounds
ArticleAuthors Sh. V. Sadetdinov, L. Sh. Pestryaeva, I. V. Fadeev, D. A. Pestryaev

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):

Sh. V. Sadetdinov, Dr. Chem., Prof., Dept. “Materials science and metallurgical processes”, E-mail:
D. A. Pestryaev, Student


Chuvash State Agrarian University (Cheboksary, Ruissia):
L. Sh. Pestryaeva, Cand. Ped., Associate Prof.


I. Ya. Yakovlev Chuvash State Pedagogic University (Cheboksary, Russia):
I. V. Fadeev, Cand. Eng., Associate Prof., Head of Engineering Science Dept., E-mail:

Powder metallurgy
ArticleName Selection of modes for laser cladding of PR-08Kh17N8S6G powder
ArticleAuthors A. N. Gots, A. B. Lyukhter, D. S. Gusev, A. V. Zavitkov

Vladimir State University named after Alexander and Nikolay Stoletovs (Vladimir, Russia):

A. N. Gots, Dr. Eng., Prof., Dept. of Heat Engines and Power Plants, E-mail:
A. B. Lyukhter, Cand. Eng., Director of the Scientific and Educational Center for the Implementation of Laser Technologies, E-mail:
D. S. Gusev, Junior Researcher, Scientific and Educational Center for the Implementation of Laser Technologies, E-mail:
A. V. Zavitkov, Research Engineer, Scientific and Educational Center for the Implementation of Laser Technologies, E-mail:

Machine-building Technologies
ArticleName Technological assurance of the accuracy of cycloidal helical surfaces when processing them with a non-profiled tool on CNC machines
ArticleAuthor A. A. Goncharov

Bauman Moscow State Technical University (Moscow, Russia):

A. A. Goncharov, Assistant, “Mechanical Engineering Technology” Dept., E-mail:

Economics and Finances
ArticleName Challenges and prospects for the development of ferrous metallurgy in the Republic of Belarus
ArticleAuthors S. Yu. Solodovnikov, T. V. Sergievich

Belarusian National Technical University (Minsk, Belarus):

S. Yu. Solodovnikov, Dr. Econ., Prof., Head of Dept. of Economics and Law, E-mail:
T. V. Sergievich, Cand. Econ., Associate Prof., Dept. of Economics and Law, E-mail:

ArticleName The development of ferrous metallurgy is an effective way to restore the Syrian economy
ArticleAuthors S. V. Podkur, G. I. Kotelnikov, A. E. Semin

National University of Science and Technology “MISiS” (Moscow, Russia):

S. V. Podkur, Post-graduate Student, Dept. of Steel Metallurgy, New Production Technologies and Protection of Metals
G. I. Kotelnikov, Cand. Eng., Associate Prof., Dept. of Steel Metallurgy, New Production Technologies and Protection of Metals, E-mail:
A. E. Semin, Dr. Eng., Prof., Dept. of. Steel Metallurgy, New Production Technologies and Protection of Metals

Education of specialists and HR Policy
ArticleName The role of the Project Management discipline in project training when teaching bachelors-metallurgists within the CDIO ideology
ArticleAuthors T. R. Gilmanshina, I. V. Dubova, G. S. Sanacheva, N. V. Vasyunina

Siberian Federal University (Krasnoyarsk, Russia):

T. R. Gilmanshina, Cand. Eng., Associate Prof., Dept. of CDIO Engineering Bachelor’s Degree Program, E-mail:
I. V. Dubova, Cand. Eng., Associate Professor, Dept. of Fundamental Natural Science Education, E-mail:
G. S. Sanacheva, Cand. Eng., Associate Professor, Dept. of General Metallurgy, E-mail:
N. V. Vasyunina, Cand. Eng., Associate Professor, Dept. of Metallurgy of Non-ferrous Metals, E-mail:

Journals →  Chernye Metally →  2020 →  #11