Chernye Metally
The Chernye Metally journal, No. 11-2021, was published, which is mainly dedicated to the anniversary of the united chair for Metallurgy and materials processing technologies of the Sukhoi State Technical University of Gomel. The articles of this section highlight the issues of the effect of the deformation rate on mechanical properties and microhardness of a thin steel wire made of 80 steel, the effect of speed parameters of reduction on the accuracy of the resulting pipe profile, the study of physical and mechanical properties of rapidly quenched strips made of multicomponent iron-based alloys, improving the quality of traditional products due to the use of alloys with unique service properties and the modernization of the Hunter method.
The issue of the journal is headed by the Ore dressingsection, where an article by the authors of the Bakor Scientific and Technical Center has been published, which acquaints readers with reasons for a sharp decrease in the filtering ability of ceramic elements, as well as with the search for a solution to restore the filter elementsefficiency.
The Steel production and metal sciencesection presents an article ofauthors of the South Ural State University, in which the issues of using hydrogen instead of carbon as a reductant in ferrous metallurgy, as well as the second part of S. V. Davydov's article “Phase equilibria in the carbide region of the iron-carbon diagram”, which offers a complete diagram of the iron-carbide ε-Fe2C system in the concentration range of 0-9.7% C without lines of graphite and diamond liquidus. The first part of this article was published in No. 9, 2021.
In the Rolling and other Metal Forming processessection three articles of authors of the Nosov Magnitogorsk State Technical University has been published, which are devoted to assessing the effect of plastic reduction on the stress-strain state of reinforcing bars, plotting dependencies for choosing rational strip tensions in the digital twin of a cold rolling mill, as well as the peculiarities of the formation of mechanical properties in shaped bars made of 09G2S steel in the process of accelerated water cooling.
In the same issue, publications are presented in the Energy, ecology and recyclingsection.
The Chronicle section contains material dedicated to the memory of Academician L. A. Vaisberg.
Please find more details below, or order your printed or electronic version of the Journal.
| Mineral processing | |
| Название | Chemical method of restoring the filtering ability of ceramic filter elements |
| Авторы | B. L. Krasnyi, I. G. Zimbovskiy, U. V. Dmitrakova, E. D. Chylbak-ool |
| Информация об авторах | Bakor Scientific and Technical Center Ltd. (Moscow, Russia): B. L. Krasnyi, Dr. Eng., General Director,, e-mail: bakor@nicbakor.ru National University of Science and Technology “MISiS” (Moscow, Russia): |
| Steelmaking and Metal science | |
| Название | Technological and materials science aspects of the transition in ferrous metallurgy to carbon-free processes |
| Авторы | V. E. Roshchin, A. V. Roshchin, Yu. S. Kuznetsov, Yu. N. Goikhenberg |
| Информация об авторах | South Ural State University (Chelyabinsk, Russia): V. E. Roshchin, Dr. Eng., Prof., Dept. of Pyrometallurgical and Foundry Technologies, e-mail: vero@susu.ru |
| Название | Phase equilibriums in the carbide area of the «iron-carbon» diagram. Part 2. Complete diagram of the iron - ε-Fe2C carbide system |
| Автор | S. V. Davydov |
| Информация об авторе | Bryansk State Technical University (Bryansk, Russia): S. V. Davydov, Dr. Eng., Prof., Dept. of Tribotechnical Materials Science and Materials Technology, e-mail: fulleren_grafen@mail.ru |
| 5 years of the united department “Metallurgy and ma-terials processing technology” of Sukhoi State technical University of Gomel | |
| Название | Influence of drawing speed on thin wire mechanical properties and microhardness |
| Авторы | Yu. L. Bobarikin, Yu. V. Martyanov, Ya. I. Radkin, I. A. Tsyrganovich |
| Информация об авторах | Sukhoi State Technical University of Gomel (Gomel, Belarus): |
| Название | Strength, plasticity, microhardness and inhomogeneous plastic deformation of strips made of amorphous multicomponent iron-based alloys |
| Авторы | M. N. Vereshchagin, V. G. Shepelevich, O. M. Ostrikov |
| Информация об авторах | Sukhoi State Technical University of Gomel (Gomel, Belarus): M. N. Vereshchagin, Dr. Eng., Professor, Dept. of Metallurgy and Materials Processing Technology
Belarusian State University (Minsk, Belarus): V. G. Shepelevich, Dr. Phys.-Math., Professor, Dept. of Solid State Physics |
| Название | Effect of speed parameters of reduction on the resulting pipe profile accuracy |
| Авторы | Yu. L. Bobarikin, Ya. I. Radkin, Yu. V. Martyanov, A. V. Strelchenko |
| Информация об авторах | Sukhoi State Technical University of Gomel (Gomel, Belarus): Yu. L. Bobarikin, Cand. Eng., Associate Prof., Head of the Dept. of Metallurgy and Materials Processing Technology, e-mail: bobarikin@tut.by
Byelorussian Steel Works - Management company of the “Byelorussian Metallurgical Company” holding (Zhlobin, Belarus): |
| Название | Modification of metallic dispersions during high energy processing |
| Авторы | M. N. Vereshchagin, S. N. Tselueva, M. Yu. Tseluev |
| Информация об авторах | Sukhoi State Technical University of Gomel (Gomel, Belarus): M. N. Vereshchagin, Dr. Eng., Professor, Dept. of Metallurgy and Materials Processing Technology |
| Название | Modernization of the Hunter method for testing steel cord in accordance with the operating conditions of a car tire |
| Авторы | Yu. L. Bobarikin, Yu. V. Martyanov, A. V. Vedeneev, A. V. Khotko |
| Информация об авторах | Sukhoi State Technical University of Gomel (Gomel, Belarus): Yu. L. Bobarikin, Cand. Eng., Associate Prof., Head of the Dept. of Metallurgy and Materials Processing Technology, e-mail: bobarikin@tut.by
Byelorussian Steel Works - Management company of the "Byelorussian Metallurgical Company" holding (Zhlobin, Belarus):
JSC Belshina (Bobruisk, Belarus): |
| Rolling and other Metal forming processes | |
| Название | The effect of compaction on the stress-strain state of prestressing strands |
| Авторы | A. G. Korchunov, E. M. Medvedeva, V. A. Kharitonov, D. V. Konstantinov |
| Информация об авторах | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): A. G. Korchunov, Dr. Eng., Professor, Vice-Rector on International Affairs, e-mail: international@magtu.ru |
| Название | Justification of strip tension in the cold rolling mill digital twin |
| Авторы | M. I. Rumyantsev, A. N. Zavalishchin, A. N. Kolybanov, O. N. Esipova |
| Информация об авторах | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): M. I. Rumyantsev, Dr. Eng., Professor, Dept. of Materials Processing Technologies, e-mail: mikhail.rumyantsev54@bk.ru |
| Название | Features of structure and mechanical properties formation in shaped rolled products made of 09G2S steel in accelerated water cooling process |
| Авторы | A. B. Sychkov, A. B. Moller, G. Ya. Atangulova, G. V. Agutin |
| Информация об авторах | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): |
| Power engineering, Ecology and Recycling | |
| Название | New methods of electricity generation using steam from waste heat boilers fired by waste gases from high-temperature plants in ferrous metallurgy |
| Авторы | V. S. Dubinin, T. A. Stepanova, S. O. Shkarupa, V. P. Krupskiy |
| Информация об авторах | National Research University «Moscow Power Engineering Institute» (Moscow, Russia): V. S. Dubinin, Cand. Eng., Associate Prof., e-mail: promteploenergetika@rambler.ru
Leonov Moscow Region University of Technology (Korolev, Russia):
Ekokuber Ltd. (Leskovka, Minsk region, Belarus): |
| Название | Technique for modeling random disturbances of the electric arcs lengths for tuning a nonlinear P-controller of impedance |
| Авторы | A. A. Nikolaev, P. G. Tulupov |
| Информация об авторах | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): A. A. Nikolaev, Cand. Eng., Professor, Head of Dept. of Automated Electric Drive and Mechatronics, e-mail: aa.nikolaev@magtu.ru |
| Название | Man-made metal-containing waste of I-II class — raw materials for obtaining new products and materials |
| Авторы | V. A. Kolesnikov, V. A. Brodskiy, D. Yu. Zhukov, A. V. Kolesnikov |
| Информация об авторах | Mendeleev University of Chemical Technology of Russia (Moscow, Russia): V. A. Kolesnikov, Dr. Eng., Prof., Head of Dept. of Technology of Inorganic Substances and Electrochemical Processes, e-mail: Kolesnikov-tnv-i-ep@yandex.ru |
