Журналы →  Chernye Metally →  2021 →  №12

Chernye Metally


 

The "Chernye metally" journal No. 12-2021 has been published, which is mainly devoted to the iron and steel production processes, as well as foundry production.

 

The journal`s issue is headed by the “Pig iron production” section, which presents articles devoted to studies of the blast-furnace process using reducing blast additives in the conditions of the Novolipetsk Iron and Steel Works, considers rational technological solutions for the production of pig iron in blast furnaces of the Magnitogorsk Iron and Steel Works, recommends an effective way to reduce heat losses in air-cooled tuyere of a blast furnace, as well as a method for a comprehensive analysis of the yield and strength of the sinter based on a mathematical programming model.

 

The next section “Steel production and foundry production” mainly presents the publications of specialists from the Nosov Magnitogorsk State Technical University, telling about solving the issue of mastering hydrogen as a reducing agent and involving off-balance complex and technogenic raw materials in metallurgical production and about improving the technology of vacuum processing of wheel steel. Other articles in this section tell about the processing of a melt using wire with Ca- and Ba-fillers and its effect on the quality of steel during out-of-furnace processing (Volgograd State Technical University), as well as the development of an effective mixture for thermal insulation of casting heads based on peat mass using glyceroborate (Chuvash State University).

 

The "Pipe Production" section publishes articles by specialists from NUST MISIS and JSC RusNITI devoted to the development of radial shear rolling, extrusion of pipes from high-chromium 08Kh13N4M1F steel, and the properties of pipes from the TMK-S alloy.

 

The same issue also presents publications in sections “Coating and Corrosion Protection”, “Certification” and “Economics and Finance”.

 

Please find more details below, or order your printed or electronic version of the Journal.


Ironmaking
Название Investigation of the blast furnace process using multicomponent blast
Авторы P. I. Chernousov, S. N. Seregin, R. E. Grishin, A. N. Chikaleva
Информация об авторах

National University of Science and Technology “MISiS” (Moscow, Russia):

P. I. Chernousov, Cand. Eng., Associate Professor, e-mail: p.chernou@yandex.ru
R. E. Grishin, Post-graduate Student, e-mail: grane676@gmail.com
A. N. Chikaleva, Post-graduate Student, e-mail: miss.chikaleva@gmail.com

Novolipetsk Steel (Lipetsk, Russia):

S. N. Seregin, Director of the Repair Complex, e-mail: seregin_sn@nlmk.com

Название Rational technological solutions in production of pig iron in blast furnaces of Magnitogorsk Iron and Steel Works
Авторы A. S. Kharchenko, S. K. Sibagatullin, A. V. Pavlov, A. A. Polinov
Информация об авторах

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
A. S. Kharchenko, Dr. Eng., Associate Professor, Head of the Dept. of Metallurgy and Chemical Technologies, e-mail: as.mgtu@mail.ru
S. K. Sibagatullin, Dr. Eng., Professor, Dept. of Metallurgy and Chemical Technologies

 

Magnitogorsk Iron and Steel Works (Magnitogorsk, Russia):
A. V. Pavlov, Cand. Eng., Head of Blast Furnace Shop
A. A. Polinov, Head of Mining and Processing Division

Название Evaluation of the efficiency of structures of a heat-insulating insert in the blowing channel of the blast furnace air tuyere
Авторы S. V. Albul, O. A. Kobelev, I. A. Levitskiy, A. G. Radyuk
Информация об авторах

National University of Science and Technology “MISiS” (Moscow, Russia):

S. V. Albul, Senior Lecturer, Dept. of Engineering of Technological Equipment, e-mail: albul@misis.ru
O. A. Kobelev, Dr. Eng., Professor, Dept. of Engineering of Technological Equipment
I. A. Levitskiy, Cand. Eng., Associate Professor, Dept. of Energy-efficient and resource-saving industrial technologies
A. G. Radyuk, Dr. Eng., Professor, Dept. of Metal Forming

Название Analysis and prediction of sinter yield and strength based on mathematical programming model
Авторы P. F. Chernavin, A. V. Malygin, T. V. Detkova, V. Yu. Kuchin
Информация об авторах

Ural Federal University (Ekaterinburg, Russia):

P. F. Chernavin, Cand. Econ., Associate Professor, Dept. of Big Data Analytics and Video Analysis Methods, e-mail: chernavin.p.f@gmail.com
A. V. Malygin, Dr. Eng., Professor, Dept. of Metallurgy of Iron and Alloys, Deputy Director of Ferrox Ltd., e-mail: a.malygin@urfu.ru


Severstal (Cherepovets, Russia):
T. V. Detkova, Head of the Center for Raw Materials Research, e-mail: tvdetkova@severstal.com
V. Yu. Kuchin, Leading Expert, e-mail: vyukuchin@severstal.com

Steelmaking and Foundry production
Название Determination of hydrogen consumption for solid-phase selective reduction of complex iron ore raw materials in laboratory research
Авторы V. A. Bigeev, S. K. Sibagatullin, A. S. Kharchenko, M. V. Potapova
Информация об авторах

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

V. A. Bigeev, Dr. Eng., Professor, Dept. of Metallurgy and Chemical Technologies, e-mail: v.bigeev11@yandex.ru
S. K. Sibagatullin, Dr. Eng., Professor, Dept. of Metallurgy and Chemical Technologies, e-mail: 10tks@mail.ru
A. S. Kharchenko, Dr. Eng., Associate Professor, Head of the Dept. of Metallurgy and Chemical Technologies, e-mail: as.mgtu@mail.ru
M. V. Potapova, Cand. Eng., Associate Professor, Dept. of Metallurgy and Chemical Technologies, e-mail: marina_potapova8@mail.ru

Название Improvement of the technology for railway wheel steel vacuum processing
Авторы A. N. Shapovalov, S. P. Nefedyev, S. I. Platov, M. V. Kharchenko
Информация об авторах

Novotroitsk branch of NUST MISIS (Novotroitsk, Russia):

A. N. Shapovalov, Cand. Eng., Professor, Head of the Dept. of Metallurgical Technologies and Equipment

 

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
S. P. Nefedyev, Cand. Eng., Senior Researcher, Research and Innovation Sector
S. I. Platov, Dr. Eng., Professor, Head of the Dept. of Machines and Technologies for Metal Forming and Mechanical Engineering
M. V. Kharchenko, Cand. Eng., Associate Professor, e-mail: kharchenko.mv@bk.ru

Название Estimation of the influence of melt processing with Ca- and Ba-containing wire on the phase composition and contamination with non-metallic inclusions during ladle furnace treatment and casting of 26KhMFBA steel
Авторы A. Yu. Agarkov, D. V. Rutskiy, N. A. Zyuban, G. V. Babin
Информация об авторах

Volgograd State Technical University (Volgograd, Russia):

A. Yu. Agarkov, Postgraduate Student, Dept. “Technologies of Materials”
D. V. Rutskiy, Cand. Eng., Associate Prof., Acting Head of the Dept. “Technologies of Materials”, e-mail: tecmat@vstu.ru
N. A. Zyuban, Dr. Eng., Professor, Dept. “Technologies of Materials”
G. V. Babin, Postgraduate Student, Dept. “Technologies of Materials”

Название Development of peat-containing mixtures for thermal insulation of steel castings tops using glyceroborates
Авторы I. E. Illarionov, L. Sh. Pestryaeva, I. A. Strelnikov, Sh. V. Sadetdinov
Информация об авторах

I. N. Ulyanov Chuvash State Technical University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Professor, Head of the Dept. of Materials Science and Metallurgical Processes, e-mail: tmilp@rambler.ru
I. A. Strelnikov, Cand. Eng., Associate professor, Dept. of Materials Science and Metallurgical Processes
Sh. V. Sadetdinov, Dr. Chem., Professor, Dept. of Materials Science and Metallurgical Processes, e-mail: avgustaf@list.ru

Chuvash State Agrarian University (Cheboksary, Russia):

L. Sh. Pestryaeva, Cand. Ped., Associate Professor

Pipe production
Название Modern development of elements of theory, technology and mini-mills of radial-shear rolling
Авторы S. P. Galkin, Yu. V. Gamin, A. S. Aleshchenko, B. A. Romantsev
Информация об авторах

National University of Science and Technology “MISiS” (Moscow, Russia):

S. P. Galkin, Dr. Eng., Professor, Metal Forming Dept., e-mail: glk-omd@yandex.ru
Yu. V. Gamin, Cand. Eng., Associate Professor, Metal Forming Dept., e-mail: y.gamin@mail.ru
A. S. Aleshchenko, Cand. Eng., Associate Professor, Head pf the Metal Forming Dept., e-mail: judger85@mail.ru
B. A. Romantsev, Dr. Eng., Professor, Metal Forming Dept., e-mail: boralr@yandex.ru

Название Plasticity resource of high-chrome 08Kh13N4M1F steel when pressing
Авторы A. V. Vydrin, A. S. Zhukov, A. S. Tumashev, M. A. Pavlova
Информация об авторах

RusNITI JSC (Chelyabinsk, Russia):

A. V. Vydrin, Dr. Eng., Professor, Deputy General Director for Research1, e-mail: VydrinAV@rosniti.ru
M. A. Pavlova, Senior Engineer, Laboratory of Simulation of Technological Processes, e-mail: pavlova@rosniti.ru

 

Volzhsky Pipe Plant (Volzhsky, Russia):

A. S. Zhukov, Quality Director, e-mail: ZhukovAS@vtz.ru
A. S. Tumashev, Leading Engineer Technologist, e-mail: TumashevAS@vtz.ru

Название Results of studying the properties and modes of manufacturing pipes from TMK-S alloy
Авторы K. Yu. Yakovleva, N. V. Fokin, B. V. Barichko, Ya. I. Kosmatskiy
Информация об авторах

RusNITI JSC (Chelyabinsk, Russia):
K. Yu. Yakovleva, Cand. Eng., Senior Researcher
N. V. Fokin, Researcher
B. V. Barichko, Cand. Eng., Leading Researcher
Ya. I. Kosmatskiy, Dr. Eng., Head of the Laboratory for drawing and pressing, Deputy head of the Seamless Pipes Section in the Pipe Manufacturing Technology Department, e-mail: kosmatski@rosniti.ru

Coatings application and Corrosion protection
Название Evaluation of anti-galling properties of threaded coating of tubing couplings obtained by thermal diffusion galvanizing and friction cladding
Авторы R. R. Dema, S. I. Platov, N. A. Devyaterikova, R. G. Galin
Информация об авторах

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

R. R. Dema, Cand. Eng., Associate Professor, Dept. of Machines and Technologies for Metal Forming and Mechanical Engineering, e-mail: demarr78@list.ru
S. I. Platov, Dr. Eng., Professor, Head of the Dept. of Machines and Technologies for Metal Forming and Mechanical Engineering

 

Pervouralsk Novotrubny Plant (Pervouralsk, Russia):
N. A. Devyaterikova, Leading Research Engineer

 

Vika-Gal Ltd. (Chelyabinsk, Russia):
R. G. Galin, Cand. Eng., Director of Vika Gal Ltd.

Certification
Название Declaration of conformity in the field of metallurgical production
Авторы A. V. Kraev, V. A. Ivanova
Информация об авторах

PRONTO Ltd. (Yaroslavl, Russia):

A. V. Kraev, Head of the Technical Control Department, e-mail: alex.kraev@gmail.com

 

Yaroslavl State Technical University (Yaroslavl, Russia):

V. A. Ivanova, Dr. Eng., Associate Professor, Head of the Dept. of Materials Technology, Standardization and Metrology, e-mail: ivanova-waleriya@mail.ru

Economics and Finances
Название Internal control as a tool for anti-crisis stability of metallurgical companies
Авторы I. N. Fedorenko, V. V. Makarov
Информация об авторах

Bonch-Bruevich Saint Petersburg State University of Telecommunications (St. Petersburg, Russia):

I. N. Fedorenko, Cand. Econ., Associate Professor, Dept. of Economics and Management of Infocommunications, e-mail: Fedorenko.irina@mail.ru
V. V. Makarov, Dr. Econ., Professor, Head of the Dept. of Economics and Management of Infocommunications, e-mail: akad.makarov@mail.ru

Журналы →  Chernye Metally →  2021 →  №12