Chernye Metally
The Chernye Metally journal No. 3-2022 was published, which is mainly devoted to sintering and the production of cast iron, as well as pipes. It is headed with an introductory article by Prof. A.V. Vydrin, member of the editorial board, head of the chair for Processes and Machines of Mechanical Engineering of the South Ural State University.
The first section presents articles devoted to the study of the physicochemical properties of high-quality sinter of PJSC MMK factory No. 5 during reduction in a hydrogen environment, consideration of the issue of creating simulation models for controlling the quality characteristics of sinter based on the committee method (development of the Ural Federal University), modernization of a coke breeze bunker`sgate drive of the of the JSCUral Steel`s blast furnace.
The next section is Foundry will be of interest for readers in the continuation of the article on the effect of modification on the performance properties of mold cast iron (part 1 published in the Chernye Metallyjournal No. 1, 2021).
The Pipe Production section highlights the issues of microstructure formation in the heat-affected zone of welded joints of pipes of the X100 strength category (JSC RusNITI), considers changes in the shape of large-diameter pipes during assembly and welding (NUST MISIS), presents the process of production of HFC electric-welded pipes from structural steel with resistance to hydrogen cracking (Vyksa Metallurgical Plant), the quality of pipes was assessed using the Harrington desirability function (Ural Federal University).
Of interest are the articles presented in the Rolling and Metal Science section, which tell about the research of rolling production at the largest metallurgical plants - Magnitogorsk, Novolipetsk and Severstal.
In the same issue, publications are presented in the Control and Technological Measurements and Ecology and Recycling sections.
Please find more details below, or order your printed or electronic version of the Journal.
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:
S. K. Sibagatullin, Dr. Eng., Professor, Dept. of Metallurgy and Chemical Technologies
A. S. Kharchenko, Dr. Eng., Associate Professor, Head of the Dept. of Metallurgy and Chemical Technologies, e-mail: as.mgtu@mail.ru
V. I. Sysoev, Postgraduate Student, Dept. of Metallurgy and Chemical Technologies
Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia:
A. A. Polinov, Head of Mining and Processing Production
Ural Federal University named after the first President of Russia B.N. Yeltsin, Ekaterinburg, Russia:
P. F. Chernavin, Cand. Econ., Associate Professor, Dept. of Big Data Analytics and Video Analysis Methods, e-email: chernavin.p.f@gmail.com
Ural Federal University named after the first President of Russia B.N. Yeltsin, Ekaterinburg, Russia1 ; Ferrox Ltd., Ekaterinburg, Russia2:
A. V. Malygin, Dr. Eng., Professor, Dept. of Metallurgy of Iron and Alloys1, Deputy Director2, e-mail: a.malygin@urfu.ru
PJSC Severstal, Moscow, Russia:
T. V. Detkova, Head of the Raw Materials Research Center3, e-mail: tvdetkova@severstal.com
V. Yu. Kuchin, Leading Expert (sinter production)3, e-mail: vyukuchin@severstal.com
Novotroitsk Branch of National University of Science and Technology MISIS, Novotroitsk, Russia:
O. V. Galochkin, Student
A. V. Nefedov, Cand. Ped., Associate Professor
National University of Science and Technology MISIS, Moscow, Russia:
O. N. Chicheneva, Cand. Eng., Associate Professor, Dept. of Computer-Aided Engineering and Design, e-mail: ch-grafika@mail.ru
Volgograd Industrial College, Volgograd, Russia:
V. A. Gulevsky, Cand. Eng., Lecturer, e-mail: gulevskiy.v@mail.ru
Volgograd State Technical University, Volgograd, Russia:
S. N. Tsurikhin, Cand. Eng., Associate Professor, Dept. of Machinery and Technology of Foundry
V. V. Gulevsky, Postgraduate Student, Dept. of Theoretical Mechanics
N. Yu. Miroshkin, Postgraduate Student, Dept. of Machinery and Foundry Technology
JSC Russian Research Institute of Pipe Industry, Chelyabinsk, Russia1 ; South Ural State University, Chelyabinsk, Russia2:
I. I. Suleymanova, Engineer, Laboratory for Pipe Strength and Welding1, Postgraduate Student, Dept. of Equipment and Technology of Welding Production2, e-mail: suleimanova@rosniti.ru
D. I. Derbenev, Junior Researcher, Laboratory of Pipe Strength and Welding1, Postgraduate Student, Department of Equipment and Welding Technology2
JSC Russian Research Institute of Pipe Industry, Chelyabinsk, Russia:
V. D. Kvashnin, Head of Welding Technology Section, Laboratory of Strength and Pipe Welding
D.S. Yakovlev, Cand. Eng., Head of Laboratory, Laboratory of Pipe Strength and Welding
N. V. Elistratova, Engineer of the laboratory of Metallurgy and Heat Treatment took part in the work.
National University of Science and Technology MISiS, Moscow, Russia:
M. A. Tovmasyan, Lecturer, Metal Forming Dept., Vyksa affiliate, e-mail: i-margarit@yandex.ru
S. V. Samusev, Dr. Eng., Prof., Metal Forming Dept.
JSC Vyksa Metallurgical Plant, Vyksa, Russia1 ; Vyksa affiliate of National University of Science and Technology MISIS, Vyksa, Russia2:
V. V. Naumenko, Cand. Eng., Head of Dept.1, Associate Professor2, e-mail: naumenkovi@mail.ru
JSC Vyksa Metallurgical Plant, Vyksa, Russia:
O. A. Baranova, Research Engineer
S. V. Kovtunov, Specialist
Bauman Moscow State Technical University, Moscow, Russia:
A. V. Muntin, Cand. Eng., Associate Professor
Ural Federal University named after the first President of Russia B.N. Yeltsin, Ekaterinburg, Russia:
G. A. Orlov, Dr. Eng., Professor, Dept. of Metal Forming, e-mail: grorl@mail.ru
A. G. Orlov, Postgraduate Student, Dept. of Metal Forming
Novolipetsk Iron and Steel Works, Lipetsk, Russia:
V. A. Pimenov, Cand. Eng., Head of Technological Projects of the Directorate for Development of New Process Technologies, e-mail: pimenov_va@nlmk.com
Cherepovets State University, Cherepovets, Russia:
Shalaevsky D. L., cand. Eng., Associate Professor, Dept. of Metallurgy, Mechanical Engineering and Technological Equipment, e-mail: shal-dmitrij@yandex.ru
Korepina K. P., Junior Researcher, Dept. of Metallurgy, Mechanical Engineering and Technological Equipment
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:
A. S. Kuznetsova, Junior Researcher, Dept. of Metal Processing Technology, e-mail: a.kuznetsova@magtu.ru
D. Yu. Alekseev, Engineer, Dept. of Metal Processing Technology
Yu. B. Kukhta, Associate Professor, Dept. of Computer Science and Programming
D. G. Emaleeva, Cand. Eng., Researcher, Dept. of Metal Processing Technology
JSC SPA Splav named after A.N. Ganichev, Tula, Russia:
A. N. Isaeva, Engineer
Tula State University, Tula, Russia:
S. N. Larin, Cand. Eng., Professor, Dept. of Mechanics of Plastic Forming, e-mail: mpf-tula@rambler.ru
V. I. Platonov, Cand. Eng., Associate Professor, Dept. of Mechanics of Plastic Forming
V. A. Korotkov, Cand. Eng., Associate Professor, Dept. of Mechanics of Plastic Forming
Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia:
I. V. Butorina, Dr. Eng., Associate Professor, e-mail: butorina_irina@mail.ru
A. V. Semencha, Cand. Chem., Director of High School of Physics and Materials Technology
2 Baltic State Technical University “Voenmekh”, St. Petersburg, Russia:
M. V. Butorina, Associate Professor
Young Metallurgists Association, Krasnoyarsk, Russia:
A. A. Vlasov, Cand. Eng., Chairman