Журналы →  Chernye Metally →  2023 →  №12

Chernye Metally



5th anniversary of the Dept. of Metallurgy and Chemical Technologies of Nosov Magnitogorsk State Technical University
Название Laboratory studies of solid-phase reduction of Sakharinskoe deposit`s nickel-containing ores to obtain a metallized product
Авторы V. A. Bigeev, A. S. Kharchenko, M. V. Potapova, V. I. Sysoev
Информация об авторах

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

V. A. Bigeev, Dr. Eng., Prof., Dept. of Metallurgy and Chemical Technologies
A. S. Kharchenko, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy and Chemical Technologies, e-mail: as.mgtu@mail.ru
M. V. Potapova, Cand. Eng., Associate Prof., Dept. of Metallurgy and Chemical Technologies, e-mail: marina_potapova8@mail.ru
V. I. Sysoev, Assistant, Dept. of Metallurgy and Chemical Technologies

Название Technogenic formations as a source of mineral raw materials for vanadium production
Авторы M. V. Shubina, E. S. Makhotkina, I. G. Shubin
Информация об авторах

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

M. V. Shubina, Cand. Eng., Associate Prof., Dept. of Metallurgy and Chemical Technologies, e-mail: shubina_mar@mail.ru
E. S. Makhotkina, Cand. Eng., Associate Prof., Dept. of Metallurgy and Chemical Technologies, e-mail: lena.makhotkina@yandex.ru
I. G. Shubin, Cand. Eng., Associate Prof., Dept. of Materials Processing Technology, e-mail: shubin64@mail.ru

Название Use of coal preparation waste as a reducing agent in the Romelt process
Авторы N. Yu. Svechnikova, V. N. Petukhov, S. V. Yudina, D. V. Yudin
Информация об авторах

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

N. Yu. Svechnikova, Cand. Eng., Associate Prof., Dept. of Metallurgy and Chemical Technologies, e-mail: natasha-svechnikova@yandex.ru
V. N. Petukhov, Dr. Eng., Prof., Dept. of Metallurgy and Chemical Technologies, e-mail: chief.petuhov2013@yandex.ru
S. V. Yudina, Senior Lecturer, Dept. of Metallurgy and Chemical Technologies, e-mail: yudinasv1478@mail.ru
D. V. Yudin, Student, Dept. of Metallurgy and Chemical Technologies, e-mail: ydv2002@mail.ru

Название Influence of coke size on the performance of a blast furnace equipped with a cone charging device under the conditions of Magnitogorsk Iron and Steel Works
Авторы A. S. Kharchenko, S. V. Yudina, S. K. Sibagatullin, A. V. Pavlov
Информация об авторах

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

A. S. Kharchenko, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy and Chemical Technologies, e-mail: as.mgtu@mail.ru
S. V. Yudina, Postgraduate Student, Dept. of Metallurgy and Chemical Technologies, e-mail: yudinasv1478@mail.ru
S. K. Sibagatullin, Dr. Eng., Prof., Dept. of Metallurgy and Chemical Technologies, e-mail: 10tks@mail.ru

Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia

A. V. Pavlov, Cand. Eng., Head of the Blast Furnace Shop

Sintering
Название Influence of iron ore concentrate size on pelletizing and sintering parameters
Авторы E. A. Milokhin, A. S. Bratishcheva, A. N. Shapovalov
Информация об авторах

Novolipetsk Metallurgical Plant, Lipetsk, Russia
E. A. Milokhin, Expert on Ore-thermal Processes and Briquetting, Directorate for the Development of New Process Technologies, e-mail: milohin_ea@nlmk.com
A. S. Batishcheva, Engineer, Directorate for the Development of New Process Technologies, e-mail: batischeva_as@nlmk.com

 

Novotroitsk branch of the National University of Science and Technology “MISIS”, Novotroitsk, Russia
A. N. Shapovalov, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: alshapo@misis.ru

Steel making
Название Development and research of improved automatic control systems for electrotechnological modes of high-power ladle-furnace units
Авторы A. A. Nikolaev, P. G. Tulupov, R. R. Dema, S. S. Ryzhevol
Информация об авторах

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:

A. A. Nikolaev, Cand. Eng., Associate Prof., Head of the Dept. of Automated Electric Drive and Mechatronics, e-mail: aa.nikolaev@magtu.ru
P. G. Tulupov, Cand. Eng., Associate Prof., Dept. of Automated Electric Drive and Mechatronics, e-mail: tulupov.pg@mail.ru
R. R. Dema, Dr. Eng., Prof., Dept. of Machines and Technologies of Metal Forming and Mechanical Engineering, e-mail: demarr@magtu.ru
S. S. Ryzhevol, Postgraduate Student, Dept. of Automated Electric Drive and Mechatronics, e-mail: snaffls18@gmail.com

Slag forming and properties
Название Influence of stabilizers on the composition and structure of metallurgical slag
Авторы A. N. Bodyakov, I. Yu. Markova, V. V. Strokova, M. A. Stepanenko
Информация об авторах

Belgorod State Technological University named after. V. G. Shukhov, Belgorod, Russia

A. N. Bodyakov, Head of the Laboratory of the Dept. of Roads and Railways named after. A. M. Gridchin, e- mail: savaa72@mail.ru
I. Yu. Markova, Cand. Eng., Associate Prof., Dept. of Materials Science and Technology, e-mail: irishka-31.90@mail.ru
V. V. Strokova, Dr. Eng., Prof., Director of the Innovative Scientific, Educational and Experimental Industrial Center for Nanostructured Composite Materials, e-mail: vvstrokova@gmail.com
M. A. Stepanenko, Engineer of the 2nd Category, Innovative Scientific, Educational and Experimental Industrial Center for Nanostructured Composite Materials, e-mail: stepanenko.rita2017@yandex.ru

Sheet rolling and Pipe making
Название Study of the features of clad sheet deformation during hot rolling
Авторы A. G. Zinyagin, A. V. Muntin, A. P. Stepanov, N. R. Borisenko
Информация об авторах

Bauman Moscow State Technical University, Moscow, Russia

A. G. Zinyagin, Cand. Eng., Associate Prof., e-mail: ziniagin_ag@bmstu.ru
A. V. Muntin, Cand. Eng., Associate Prof., e-mail: muntin_av@bmstu.ru
A. P. Stepanov, Graduate Student, e-mail: andreywester24@gmail.com
N. R. Borisenko, Graduate Student, e-mail: borisenko_nr@bmstu.ru

Название Study of energy-power parameters of the asymmetric rolling process and assessment of the steel strip microstructure
Авторы A. V. Kozhevnikov, D. L. Shalaevsiy, Yu. V. Platonov, I. A. Kozhevnikova
Информация об авторах

Cherepovets State University, Cherepovets, Russia

A. V. Kozhevnikov, Dr. Eng., Associate Prof., Head of the Dept. of Electric Power and Electrical Engineering
D. L. Shalaevskiy, Cand. Eng., Associate Prof., Dept. of Metallurgy, Mechanical Engineering and Process Equipment, e-mail: shal_dmitrij@yandex.ru
Yu. V. Platonov, Head of the Laboratory, Dept. of Electrical Power Engineering and Electrical Engineering
I. A. Kozhevnikova, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy, Mechanical Engineering and Process Equipment

Название Application of computer modeling in the production of electric-welded pipe of triangular cross-section
Авторы I. L. Kontievsky, E. D. Koryakovsky, N. L. Bolobanova, K. E. Akopyan, V. S. Yusupov
Информация об авторах

PAO Severstal, Cherepovets, Russia

I. L. Kontievsky, Specialist of the First Category of the Design Center, e-mail: igor.kontievskij@yandex.ru
E. D. Koryakovsky, Leading Equipment Expert, e-mail: ed.koriakovskii@severstal.com

 

Cherepovets State University, Cherepovets, Russia
N. L. Bolobanova, Cand. Eng., Associate Prof., Dept. of Metallurgy, Mechanical Engineering and Process Equipment, e-mail: nlbolobanova@chsu.ru


Baikov Institute of Metallurgy and Materials Science RAS, Moscow, Russia
K. E. Akopyan, Cand. Eng., Researcher, Laboratory of Plastic Deformation of Metallic Materials, e-mail: kaakopyan@yandex.ru
V. S. Yusupov, Dr. Eng., Head of the Laboratory of Plastic Deformation of Metallic Materials, e-mail: vsyusupov@mail.ru

Название Study of the resistance of plugs when piercing billets made of 20Kh13 steel on the MISIS-130D screw rolling mill
Авторы A. S. Aleshchenko, V. A. Lakiza, B. A. Romantsev, A. V. Korol
Информация об авторах

National University of Science and Technology "MISIS" (NUST "MISIS"), Moscow, Russia

A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of the Dept. of Metal Forming, e-mail: aleschenko.as@misis.ru
V. A. Lakiza, Postgraduate Student, Dept. of Metal Forming, e-mail: lvladislavl@mail.ru
B. A. Romantsev, Dr. Eng., Prof., Dept. of Metal Forming, e-mail: boralr@yandex.ru

 

Vyksa branch of NUST MISIS, Vyksa, Russia
A. V. Korol, Cand. Eng., Associate Prof., Dept. of Technology and Equipment for Metal Forming, e-mail: korol_av@omk.ru

Название Study of the process of press piercing of billets and development of technological measures to reduce defect formation in the area of pressing-out failure
Авторы N. V. Fokin, Ya. I. Kosmatsky, A. S. Tumashev, V. V. Baikov
Информация об авторах

TMK Research, LLC, Chelyabinsk, Russia

N. V. Fokin, Deputy Head of the Laboratory of Drawing and Extrusion, e-mail: fokin@tmk-group.com
Ya. I. Kosmatsky, Dr. Eng., Deputy General Director for Scientific Work, e-mail: KosmatskiyYI@tmk-group.com

 

Volzhsky Pipe Plant, Volzhsky, Russia
A. S. Tumashev, Leading Process Engineer, Pipe Rolling Laboratory, e-mail: aleksandr.tumashev@tmk-group.com
V. V. Baykov, Leading Process Engineer, Pipe Rolling Laboratory, e-mail: vasiliy.baykov@tmk-group.com

60th anniversary of the Dept. of Technology of Mechanical Engineering of Sevastopol State University
Название Increasing the productivity of grinding cycles for cold rolling rolls by optimizing modes using the graphic-analytical method
Авторы S. M. Bratan, Yu. K. Novoselov, A. O. Kharchenko, S. I. Roshchupkin
Информация об авторах

Sevastopol State University, Sevastopol, Russia

S. M. Bratan, Dr. Eng., Prof., Head of the Dept. of Mechanical Engineering Technology, e-mail: serg.bratan@gmail.com
Yu. K. Novoselov, Dr. Eng., Prof., Dept. of Mechanical Engineering Technology, e-mail: yknovoselov@mail.sevsu.ru
A. O. Kharchenko, Cand. Eng., Prof., Dept. of Mechanical Engineering Technology, e-mail: khao@list.ru
S. I. Roshchupkin, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technology, e-mail: st.roshchupkin@yandex.ru

Название Improvement of the thermofriction processing quality by introducing additional dynamic damping devices into the technological system
Авторы S. M. Bratan, N. I. Pokintelitsa, A. O. Kharchenko, Ch. F. Yakubov
Информация об авторах

Sevastopol State University, Sevastopol, Russia

S. M. Bratan, Dr. Eng., Prof., Head of the Dept. of Mechanical Engineering Technology, e-mail: serg.bratan@gmail.com
N. I. Pokintelitsa, Dr. Eng., Prof., Dept. of Mechanical Engineering Technology, e-mail: NIPokintelitsa@sevsu.ru
A. O. Kharchenko, Cand. Eng., Prof., Dept. of Mechanical Engineering Technology, e-mail: khao@list.ru

 

Crimean State Engineering Pedagogical University, Simferopol, Russia
Ch. F. Yakubov, Cand. Eng., Rector of the University, e-mail: rector@kipu-rc.ru

Heating and Heat treatment
Название Numerical study of the stress-strain state of steels for use in building structures of metallurgical shops
Авторы M. V. Lukin, D. A. Chibrikin, V. B. Deev, S. I. Roshchina
Информация об авторах

Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia

M. V. Lukin, Cand. Eng., Associate Prof., Dept. of Building Structures, e-mail: lukin_mihail_22@mail.ru
D. A. Chibrikin, Cand. Eng., Senior Lecturer, Dept. of Building Structures, e-mail: dachibrikin@outlook.com

S. I. Roshchina, Dr. Eng., Prof., Head of the Dept. of Building Structures, e-mail: rsi3@mail.ru


Vladimir State University named after Alexander and Nikolay Stoletovs, Vladimir, Russia1 ; Wuhan Textile University, Wuhan, China2 ; National University of Science and Technology “MISIS”, Moscow, Russia3
V. B. Deev*, Dr. Eng., Prof., Chief Researcher1, Expert Prof. at the Faculty of Mechanical Engineering and Automation2, Prof. at the Dept. of Metal Forming3, e-mail: deev.vb@mail.ru

* Corresponding author.

Metal science and metallography
Название Study of the influence of temperature for deformation on the change in the microstructure of austenitic nitrogen-containing VNS53-Sh steel
Авторы N. M. Voznesenskaya, O. A. Tonysheva, D. N. Romanenko, E. A. Eliseev
Информация об авторах

National Research Center “Kurchatov Institute” – VIAM, Moscow, Russia

N. M. Voznesenskaya, Cand. Eng., Leading Researcher at Laboratory No. 605 “Structural and Special Steels”
O. A. Tonysheva, Cand. Eng., Senior Researcher at Laboratory No. 605 “Structural and Special Steels”

E. A. Eliseev, Cand. Eng., Head of the Laboratory No. 605 “Structural and Special Steels”

 

National Research Center “Kurchatov Institute” – VIAM, Moscow, Russia1 ; Gubkin branch of the National University of Science and Technology “MISIS”, Gubkin, Russia2

D. N. Romanenko, Cand. Eng., Senior Researcher at Laboratory No. 605 “Structural and Special Steels”1, Associate Prof. at the Dept. of Mining Engineering2, e-mail: romanenko-kstu46@yandex.ru

Журналы →  Chernye Metally →  2023 →  №12