Chernye Metally
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
I. A. Grishin, Cand. Eng., Associate Prof., Head of the Dept. of Geology, Mine Surveying and Mineral Processing, e-mail: igorgri@mail.ru
E. Yu. Degodya, Cand. Eng., Associate Prof., Dept. of Geology, Mine Surveying and Mineral Processing, e-mail: magur@mail.ru
I. A. Pytalev, Dr. Eng., Prof., Director of the Institute of Mining and Transport, e-mail: vehicle@list.ru
The Institute of Mining, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia
O. V. Zoteev, Dr. Eng., Prof., Head of the Laboratory of Geodynamics and Rock Pressure
Research Institute of Comprehensive Exploitation of Mineral Resources, Russian Academy of Sciences, Moscow, Russia
I. V. Shadrunova, Dr. Eng., Prof., Head of the Mining Ecology Dept., e-mail: shadrunova_@mail.ru
Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia
A. V. Pavlov, Cand. Eng., Head of Blast Furnace Shop
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
A. S. Kharchenko, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgy and Chemical Engineering, e-mail: as.mgtu@mail.ru
S. V. Yudina, Postgraduate Student, Dept. of Metallurgy and Chemical Engineering
S. K. Sibagatullin, Dr. Eng., Prof., Dept. of Metallurgy and Chemical Engineering, e-mail: 10tks@mail.ru
South Ural State University, Chelyabinsk, Russia.
V. K. Dubrovin, Dr. Eng., Prof., Dept. of Pyrometallurgical and Foundry Technologies
SIAMS Company, Yekaterinburg, Russia
T. A. Sivkova, Head of Engineering Department, e-mail: sivkova@siams.com
Yaroslavl State Technical University, Yaroslavl, Russia
A. G. Panov, Dr. Eng., Associate Prof., Prof., Dept. of Materials Technology, Standardization, and Metrology, e-mail: panov.ag@mail.ru
V. A. Ivanova, Dr. Eng., Associate Prof., Director of the Institute of Engineering and Mechanical Engineering, e-mail: ivanovava@ystu.ru
Modificator Research Center, Naberezhnye Chelny, Russia
N. G. Degtyareva, Metallurgist, e-mail: dnadegda@list.ru
Lipetsk State Technical University, Lipetsk, Russia
K. S. Gorbunov, Cand. Eng., Assistant, Dept. of Metal Forming, e-mail: beluivolk96@mail.ru
A. G. Levykina, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: levikina48@yandex.ru
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
L. V. Nosov, Engineer, Scientific-Innovation Sector, A. P. Zhilyaev Research Laboratory “Mechanics of gradient nanomaterials”, e-mail: nosov.leopold@yandex.ru
I. P. Mazur, Dr. Eng., Prof., Chief Researcher, Scientific-Innovation Sector, A. P. Zhilyaev Research Laboratory “Mechanics of gradient nanomaterials”, e-mail: mazur_ip@mail.ru
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia
K. V. Fochina, Assistant, Dept. of Mechanics
A. S. Savinov, Dr. Eng., Prof., Head of the Dept. of Mechanics, Director of the Institute of Metallurgy, Mechanical Engineering, and Materials Processing
I. V. Mikhalkina, Cand. Eng., Associate Prof., Dept. of Casting Processes and Materials Science, e-mail: miv.mgtu@mail.ru
S. M. Andreev, Dr. Eng., Head of the Dept. of Automated Control Systems
V. P. Chernov, Dr. Eng., Prof., Dept. of Casting Processes and Materials Science
TMK Research Center, Moscow, Russia
I. Yu. Pyshmintsev, Dr. Eng., Prof., General Director
E. A. Shkuratov, Cand. Eng., Head of the Digitalization and Artificial Intelligence Technologies Department, e-mail: evgeniy.shkuratov@tmk-group.com
I. V. Kosmin, Research Engineer, Digitalization and Artificial Intelligence Technologies Department
S. K. Rosolenko, Engineer, Digitalization and Artificial Intelligence Technologies Department
G. A. Yashin, Development Engineer, Digitalization and Artificial Intelligence Technologies Department
Polzunov Altai State Technical University, Barnaul, Russia
M. N. Zenin, Junior Researcher, e-mail: mikhail.zenin.96@mail.ru
Innovation Center for Modern Textile Technologies (Jianhu Laboratory), Shaoxing, China1 ; Wuhan Textile University, Wuhan, China2 ; Altai State University, Barnaul, Russia3
S. G. Ivanov, Dr. Eng., Leading Researcher1, Leading Researcher, National Key Laboratory of Digital Textile Machinery, Hubei Province2, Professor3, e-mail: serg225582@yandex.ru
Wuhan Textile University, Wuhan, China1 ; Jiangsu Suyang Packaging Co., Ltd, Yizheng City, Jiangsu, China2
S. A. Zemlyakov, Cand. Eng., Leading Researcher, National Key Laboratory of Digital Textile
Machinery, Hubei Province1, Chief Researcher2, e-mail: kobalt_20@mail.ru
Wuhan Textile University, Wuhan, China1 ; Moscow Polytechnic University, Moscow, Russia2 ; Siberian State Industrial University, Novokuznetsk, Russia3
V. B. Deev*, Dr. Eng., Prof., National Key Laboratory of Digital Textile Machinery, Hubei Province1, Head of the Dept. of Welding Equipment and Technologies2; Consulting Professor, Dept. of Ferrous Metallurgy and Chemical Engineering3, e-mail: deev.vb@mail.ru
Polzunov Altai State Technical University, Barnaul, Russia1 ; Zhejiang Briliant Refrigeration Equipment Co., Ltd, Xingchang, China2
M. A. Guryev, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technology1, Technical Director2, e-mail: gurievma@mail.ru
*Corresponding author
Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia
B. S. Ermakov, Dr. Eng., Head of the Materials Resources Laboratory, e-mail: ermakov_bs@spbstu.ru
O. V. Shvetsov, Cand. Eng., Deputy Head of the Materials Resources Laboratory
S. B. Ermakov, Cand. Eng., Research Engineer, Scientific and Technical Complex “New Technologies
and Materials”
A. M. Zolotov, Dr. Eng., Prof., Higher School of Physics and Materials Technology
Empress Catherine II St. Petersburg Mining University, St. Petersburg, Russia
S. A. Vologzhanina, Dr. Eng., Prof., Dept. of Materials Science and Technology of Art Products, e-mail: vologzhanina_sa@pers.spmi.ru
Azerbaijan Technical University, Baku, Azerbaijan
Z. A. Namazova, Cand. Eng., Associate Prof., Dept. of Metallurgy and Technology of Materials, e-mail: z_namazova76@mail.ru
S. A. Jafarova, Cand. Eng., Associate Prof., Dept. of Metallurgy and Technology of Materials, e-mail: saida.jafarova2011@gmail.com
A. J. Mansimov, Cand. Eng., Associate Prof., Senior Lecturer, Dept. of Metallurgy and Technology of Materials, e-mail: akif.mensimov@bk.ru
B. B. Musurzayeva, Senior Lecturer, Dept. of Metallurgy and Materials Technology, e-mail: musurzayeva71@mail.ru
Baku Engineering University, Baku, Azerbaijan
E. A. Abdulazimova, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: yabdulazimova@beu.edu.az
Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia
Yu. G. Kabaldin, Dr. Eng., Prof., Dept. of Mechanical Engineering Technology and Equipment, Institute of Industrial Technologies in Mechanical Engineering
M. S. Anosov, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering Technology and Equipment, Institute of Industrial Technologies in Mechanical Engineering, e-mail: anosov.ms@nntu.ru
M. A. Chernigin, Engineer, Dept. of Mechanical Engineering Technology and Equipment, Institute of Industrial Technologies in Mechanical Engineering, e-mail: honeybadger52@yandex.ru
Yu. S. Mordovina, Postgraduate Student, Lead Engineer, Institute for Retraining of Specialists, Assistant, Dept. of Mechanical Engineering Technological Complexes, Institute of Industrial Technologies in Mechanical Engineering, e-mail: ips4@nntu.ru
Tula State University, Tula, Russia
V. A. Belyakova, Cand. Eng., Associate Prof., e-mail: valentina.belyakova5@yandex.ru
I. A. Vorobyov, Cand. Eng., Associate Prof., e-mail: imsilya@mail.ru
S. M. Nikolsky, Postgraduate Student, e-mail: serg.nickolscky@yandex.ru
SPC Tekhpolikom, Moscow, Russia
G. A. Nuzhdin, Deputy General Director for Quality, e-mail: nuzhdin.65@mail.ru
Moscow Polytechnic University, Moscow, Russia
S. A. Tipalin, Cand. Eng., Prof., Dept. of Material Forming and Additive Technologies, e-mail: tsa_mami@mail.ru
D. A. Gnevashev, Cand. Eng., Associate Prof., Dept. of Material Forming and Additive Technologies, e-mail: dengnevashev@mail.ru
N. D. Borisov, Postgraduate Student, Dept. of Material Forming and Additive Technologies
M. V. Bodnar, Postgraduate Student, Dept. of Material Forming and Additive Technologies
V. A. Klimov, Postgraduate Student, Dept. of Material Forming and Additive Technologies
Platov South-Russian State Polytechnical University, Novocherkassk, Russia
E. A. Yatsenko, Dr. Eng., Prof., Head of the Dept. of General Chemistry and Technology of Silicates, Head of the Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: e_yatsenko@mail.ru
A. V. Ryabova, Cand. Eng., Associate Prof., Dept. of General Chemistry and Technology of Silicates, Senior Researcher, Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: annet20002006@yandex.ru
V. M. Kurdashov, Postgraduate Student, Dept. of General Chemistry and Technology of Silicates, Engineer, Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: viktorkurdashov@yandex.ru
V. D. Tkachenko, Postgraduate Student, Dept. of General Chemistry and Technology of Silicates, Engineer, Lab. of Recycling of Fuel Energy Waste Recycling, e-mail: tkachenko.vadik2014@yandex.ru