Журналы →  Chernye Metally →  2026 →  №3

Chernye Metally



Mineral Processing
Название Combined flows for the staged recovery of magnetite concentrate
Автор A. E. Pelevin
Информация об авторе

Ural State Mining University, Yekaterinburg, Russia

A. E. Pelevin, Dr. Eng., Associate Prof., Prof. of the Dept. of Mineral Processing, e-mail: a-pelevin@yandex.ru

Production of Ferroalloys
Название Efficient processing of deposited chromium tailings at jigging complexes
Авторы A. A. Turgaliev, O. R. Sariev, E. E. Abdulabekov, R. S. Kazbekov, A. O. Kuandykov
Информация об авторах

Zhubanov Aktobe Regional University, Aktobe, Kazakhstan

A. A. Turgaliev, Postgraduate, Dept. of Metallurgy and Mining, Faculty of Engineering
O. R. Sariev, Cand. Eng., Associate Prof., Prof. of the Dept. of Metallurgy and Mining, Faculty of Engineering, e-mail: rafhatsson@mail.ru

 

Aktobe Ferroalloys Plant, Branch of JSC TNK Kazchrome, Aktobe, Kazakhstan
E. E. Abdulabekov, Director
R. S. Kazbekov, Production Director
A. O. Kuandykov, Process Management Coordinator, Slag Processing Shop

Foundry Production
Название Protecting set cores with a porous liquid-glass coating for 20GL steel high-quality castings
Автор A. P. Firstov
Информация об авторе

Ural Federal University named after the first President of Russia B.N. Yeltsin, Nizhny Tagil Technological Institute (branch), Nizhny Tagil, Russia

A. P. Firstov, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: first55@mail.ru

Rolling and other Metal Forming Processes
Название Determination of heterogeneity of cold-rolled strip properties by thermo-EMF. Message 2. Study of the relationship between hardness and thermo-EMF
Авторы M. V. Chukin, N. V. Koptseva, Yu. Yu. Efimova
Информация об авторах

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia

M. V. Chukin, Dr. Eng., Prof., Chief Researcher, Nanosteel Research Institute, e-mail: m.chukin@mail.ru
N. V. Koptseva, Dr. Eng., Prof., Dept. of Casting Processes and Materials Science, e-mail: kopceva1948@mail.ru
Yu. Yu. Efimova, Cand. Eng., Associate Prof., Dept. of Casting Processes and Materials Science, e-mail: jefimova78@mail.ru

Название Restoration and increase of durability of section rolling mill equipment components
Авторы S. P. Nefedyev, M. V. Kharchenko, A. V. Grubnik, R. R. Dema, O. R. Latypov, Yu. R. Faskhitdinova
Информация об авторах

Novotroitsk Branch of NUST MISIS, Novotroitsk, Russia
S. P. Nefedyev, Dr. Phys.-Math., Prof., Dept. of Metallurgical Technologies and Equipment, Faculty of Metallurgical Technologies, e-mail: sergeynefedyeff@gmail.com

 

Kherson Technical University, Genichesk, Russia1Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia2
M. V. Kharchenko, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, Faculty of Engineering and Transport1, Associate Prof., Dept. of Mechanics, Institute of Metallurgy, Mechanical Engineering and Materials Processing2, e-mail: kharchenko.mv@bk.ru

R. R. Dema, Dr. Eng., Prof., Dept. of Mechanical Engineering, Faculty of Engineering and Transport1, Associate Prof., Dept. of Metal Forming Machines and Technologies, Institute of Metallurgy, Mechanical Engineering and Materials Processing2, e-mail: demar78@mail.ru

 

Kherson Technical University, Genichesk, Russia
A. V. Grubnik, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, Faculty of Engineering and Transport

NUST MISIS, Moscow, Russia
O. R. Latypov, Cand. Eng., Researcher, Dept. of Metal Forming, e-mail: latolegraf@list.ru


Fedorovsky Polar State University, Norilsk, Russia
Yu. R. Faskhitdinova, Postgraduate Student, Dept. of Metallurgical Machines and Equipment, e-mail: yuliya.galimova.17@mail.ru

Название Reducing transverse strain non-uniformity during upsetting of a cylindrical specimen with soft inserts
Авторы S. A. Tipalin, Yu. K. Filippov, Doan Suan Kuang, A. A. Gnevashev, N. I. Kuminova, V. N. Timofeev
Информация об авторах

Moscow Polytechnic University, Moscow, Russia

S. A. Tipalin, Cand. Eng., Associate Prof., Dept. of Mechanical Design and Automation, e-mail: tsa_mami@mail.ru
Yu. K. Filippov, Cand. Eng., Prof., Dept. of Mechanical Design and Automation, e-mail: yulianf@mail.ru
Doan Xuan Quang, Postgraduate Student, Dept. of Mechanical Design and Automation, e-mail: doanquang1809@gmail.com
A. A. Gnevashev, Postgraduate Student, Dept. of Mechanical Design and Automation
N. I. Kuminova, Head of the CAD Laboratory
V. N. Timofeev, Cand. Eng., Associate Prof., Dept. of Mechanical Design and Automation

Название Bending edges of steel sheet on the press with a second-order die surface (an elliptical cylinder)
Автор V. N. Shinkin
Информация об авторе

Moscow Technical University of Communications and Informatics, Moscow, Russia
V. N. Shinkin, Dr. Phys.-Math., Prof., Dept. of Physics, e-mail: shinkin-korolev@yandex.ru

Название Alloy steel isothermal upsetting modes
Авторы A. V. Chernyaev, V. N. Chudin
Информация об авторах

Tula State University, Tula, Russia

A. V. Chernyaev, Dr. Eng., Prof., Dept. of Mechanics and Plastic Forming Processes, e-mail: sovet01tsu@rambler.ru

 

Russian University of Transport (MIIT), Moscow, Russia
V. N. Chudin, Dr. Eng., Prof., Dept. of Strength of Materials and Structural Mechanics

Название Wear resistance improvement of Kh12F1steel die tooling
Авторы G. F. Mukhametzyanova, V. I. Astashchenko, I. R. Mukhametzyanov, D. T. Safarov
Информация об авторах

Kazan (Volga Region) Federal University, Naberezhnye Chelny Institute (branch), Naberezhnye Chelny, Russia

G. F. Mukhametzyanova, Cand. Eng., Associate Prof., Dept. of Materials, Technologies, and Quality, e-mail: gulnara-ineka@mail.ru
V. I. Astashchenko, Dr. Eng., Prof., Dept. of Materials, Technologies, and Quality, e-mail: astvi-52@mail.ru
I. R. Mukhametzyanov, Cand. Eng., Senior Lecturer, Dept. of Information Systems, e-mail: ilnarr116m@yandex.ru
D. T. Safarov, Cand. Eng., Associate Prof., Dept. of Digital Mechanical Engineering Production Technologies, e-mail: safarov-dt@mail.ru

Tubemaking
Название Application of machine vision for quality control of pierced shells in a tube rolling mill line
Авторы I. Yu. Pyshmintsev, E. A. Shkuratov, D. V. Levshin, K. P. Pyankov
Информация об авторах

TMK Research Center LLC, Moscow, Russia

I. Yu. Pyshmintsev, Dr. Eng., General Director
E. A. Shkuratov, Cand. Eng., Head of Digitalization and Artificial Intelligence Technologies Dept., e-mail: evgeniy.shkuratov@tmk-group.com
D. V. Levshin, Machine Learning Engineer, Digitalization and Artificial Intelligence Technologies Dept.

 

Seversky Pipe Plant Branch, Polevskoy, Russia
K. P. Pyankov, Deputy Head of Technical Dept.

Tubemaking and Metal Science
Название Сomparative analysis of hydrogen embrittlement of pipe steels during gaseous testing and electrolytic hydrogen charging
Авторы A. S. Tsvetkov, S. Yu. Nastich, A. B. Arabey, D. N. Romanenko, A. V. Muntin, A. G. Nikolaev
Информация об авторах

Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia

A. S. Tsvetkov, Cand. Eng., Head of Testing Laboratory, e-mail: tsvetkov_as@spbstu.ru

A. G. Nikolaeva, Research Engineer, e-mail: nikolaeva_ag@spbstu.ru

 

Gazprom VNIIGAZ, St. Petersburg, Russia

S. Yu. Nastich, Dr. Eng., Chief Researcher, Materials Research Laboratory, Tubular Products Development Center, e-mail: S_Nastich@vniigaz.gazprom.ru
A. B. Arabey, Cand. Eng., Chief Researcher, Tubular Products Development Center, e-mail: A_Arabey@vniigaz.gazprom.ru


JSC United Metallurgical Company, Moscow, Russia
D. N. Romanenko, Cand. Eng., Chief Innovation Specialist, Innovative Development Department, Directorate for Technology and Product Development, e-mail: romanenko_dn1@omk.ru
A. V. Muntin, Cand. Eng., Director of the Engineering and Technology Center, e-mail: muntin_av@vsw.ru

Laser Technologies
Название Effect of laser cutting and cryogenic treatment on frictional characteristics of high-speed steel
Авторы V. V. Izmailov, K. A. Sakharov, M. V. Novoselova, L. E. Afanasieva
Информация об авторах

Tver State Technical University, Tver, Russia

V. V. Izmailov, Dr. Eng., Prof., Dept. of Applied Physics
K. A. Sakharov, Assistant Prof., Dept. of Metals Technology and Materials Science
M. V. Novoselova, Cand. Eng., Associate Prof., Dept. of Applied Physics
L. E. Afanasieva, Cand. Phys.-Math., Associate Prof., Dept. of Metals Technology and Materials Science, e-mail: ludmila.a@mail.ru

Ecology and Recycling
Название Thermodynamic substantiation of selective purification of iron oxide pigment from arsenic obtained from bioxidative solutions
Авторы Sh. T. Khojiev, R. E. Toshkodirova, S. A. Kenjaeva
Информация об авторах

Almalyk State Technical Institute, Almalyk, Republic of Uzbekistan

Sh. T. Khojiev, Dr. Eng., Acting Associate Prof., Dept. of Metallurgy, e-mail: hojiyevshohruh@yandex.ru
R. E. Toshkodirova, Dr. Eng., Associate Prof., Dept. of Metallurgy, e-mail: zumrad291014@mail.ru
S. A. Kenjayeva, Doctoral Candidate, Assistant Prof., Dept. of Metallurgy, e-mail: yuldashevasevara0@gmail.com

Журналы →  Chernye Metally →  2026 →  №3