Журналы →  Tsvetnye Metally →  2014 →  №3 →  Назад

HEAVY NON-FERROUS METALS
Название Chemical transformations in the process of heating and melting of sulfide copper concentrate
Автор Bystrov V. P., Gladyuk I. E.
Информация об авторе

Chair of Non-Ferrous Metals and Gold, National University of Science and Technology “MISiS”, Moscow, Russia:

V. P. Bystrov, Leading Expert
I. E. Gladyuk, First Category Engineer, e-mail: gladukilya@gmail.com

Реферат

Modern trends in copper production are carried out in conditions of widespread implementation of autogenous processes. These processes are carried out by oxidation of sulfide materials, using pure or oxygen-enriched blast. Application of these processes makes possible to reduce the total volume of waste gases with high content of sulfur dioxide, which is the main source of sulfuric acid. According to this, the process efficiency is increased considerably. It is also necessary to maximize the total separation of the products (slag, matte, dusts, gases) and the decline in the share of losses of copper and other valuable components. Complex physical and chemical transformations in the steel furnace are defined by certain peculiarities of autogenous processes, such as high temperature, large contact surface of condensed and gaseous phases with efficient bubbling baths, etc. Promising technology for smelting of rich matte defines a number of questions, regarding the stability boundaries of melting process in order to avoid over-oxidation. The part of behavior of magnetite in changing potential of the system is actualized, since it is known that magnetite content is increased in the slag during the preparation of rich matte. In this regard, development of the defined methodology for assessment of behavior of the concentrate components plays an important role. This article gives the results of research of behavior of components in the process of heating of concentrate in neutral or oxidizing atmosphere. These results were obtained by differential thermal analysis. In general, the use of modern differential thermal analysis is an important stage of research for optimization of process parameters' melting.

Ключевые слова Differential thermal analysis, phase transformations, mechanism of oxidation, smelting, copper sulfide materials, sulfidation, bubbling, Vanyukov process
Библиографический список

1. Asaki Z., Ajersch F., Toguri J. M. Oxidation of molten ferrous sulphide. Metallurgical Transactions. 1974. Vol. 05B. pp. 1753–1759.
2. Asaki Z., Ando S., Kondo Y. Oxidation of molten copper matte. Metallurgical and Materials Transactions B. 1988. Vol. 19B. pp. 47–52.
3. Alyaser A. H., Brimacombe J. K. Oxidation kinetics of molten copper sulfide. Metallurgical and Materials Transactions B. 1995. Vol. 26B. pp. 25–40.
4. Kemori N., Denholm W. T., Kurokawa H. Reaction Mechanism in a Copper Flash Smelting Furnace. Metallurgical and Materials Transactions B. 1989. Vol. 20B. pp. 327–336.
5. Matousek J. W. The Oxidation Mechanism in Copper Smelting and Converting. Journal of Metals. 1998. Vol. 50. pp. 64–65.
6. Vanyukov A. V., Isakova R. A., Bystrov V. P. Termicheskaya dissotsiatsiya sulfidov metallov (Thermal dissociation of metal sulfides). Moscow : Nauka, 1978. pp. 64–73.
7. Raddl R. Fizicheskaya khimiya pirometallurgii medi (Physical chemistry of copper pyrometallurgy). Moscow : Inostrannaya literatura, 1955. 167 p.

Language of full-text русский
Полный текст статьи Получить
Назад