Журналы →  Tsvetnye Metally →  2019 →  №7 →  Назад

MATERIALS SCIENCE
Название Effect of scandium on the structure, segregation and properties of the aluminium cast alloy АМ4.5Cd
DOI 10.17580/tsm.2019.07.10
Автор Ri E. H., Ri Hosen, Deev V. B., Kolisova M. V.
Информация об авторе

Pacific National University, Khabarovsk, Russia:

E. H. Ri, Head of the Department of Steel Casting and Technology of Metals
Hosen Ri, Professor at the Department of Steel Casting and Technology of Metals
M. V. Kolisova, Postgraduate Student at the Department of Steel Casting and Technology of Metals

National University of Science and Technology MISiS, Moscow, Russia:

V. B. Deev, Professor at the Department of Casting and Materials Working, e-mail: deev.vb@mail.ru.

Реферат

With the help of optical and electron scanning microscopy and X-ray microanalysis, the authors of this paper looked at the formation of structural components in the АМ4.5Cd alloy and their properties when the alloy was doped with a growing amount of scandium (from 0.1 to 0.5% (wt)) with the interval of 0.1% (wt). The first stage of the research focused on identifying the structural components of the scandium alloy (2.0% (wt) Sc) that consists of 73.64% (at) Al and 26.34% (at) Sc (Al73.64Sc26.34 = Al2.8Sc ≈ Al3Sc) and the metal matrix comprised of Al + eutectic (Al + Al3Sc), % (at): 99.67 Al and 0.33 Sc. The scandium aluminide particles are of compact quadrangular shape and are evenly distributed in the matrix. The authors analysed how scandium doping influenced the structure, segregation and properties of the АМ4.5Cd alloy. Microstructural analysis of scandium alloys in backscattered electrons in a scanning microscope and in an optical microscope showed that a bigger addition of scandium would contribute to the refinement of the structural components — i.e. solid α-solution and eutectic. The authors established and provided scientific evidence to substantiate how the composition of the solid α-solution and the eutectic of different compositions and origins, as well as their microhardness correlate with the amount of scandium added. The doped eutectic is crystallized when 0.1% (wt) Sc is added. When the scandium dope is raised to 0.5% (wt), the concentration of copper and scandium in the solid α-solution rises (to 1.5 and 0.74% (at), respectively, in comparison with the undoped solution — 1.0% (at) Cu). Correspondingly, the microhardness of the solid α-solution rises 1.85 times. The hardening effect becomes stronger due to fine-dispersed particles of the Al2Cu and Al3Sc phases that precipitate when the casting is cooling down. The microhardness of the eutectic is influenced by the distribution of elements in the eutectic components of different alloys of various origins: Al – Cu, Al – Cu – Sc, Al – Cu – MnFe and others. The scandium dope raised to 0.5% (wt) leads to the formation of eutectic components with increased concentrations of Cu and Sc. Thus, in the eutectic Al + Al3Sc, the concentration of copper rises from 25% (at) for the undoped solution to 30% (at) Cu, and in the eutectic Al – Cu – Sc (Al + Al3Sc + Al2Cu) – to 32% (at) Cu and 5.5% (at) Sc following the addition of 0.5% (wt) Sc. The microhardness of the eutectic rises 3.0 times. The overall hardness HB rises ~1.4 times. Decreased solubility of copper and manganese is observed in other cadmium and iron containing eutectics.
This research was funded by the Ministry of Education and Science of the Russian Federation under the Governmental Assignment No. 11.3014.2017/4.6 “Understanding the possibility of producing REM containing addition alloys for metal alloy doping”. The research was conducted on the equipment owned by the Prikladnoe Materialovedenie centre of the Pacific National University with the funding provided by the Ministry of Education and Science of the Russian Federation under the Governmental Assignments No. 11.7208.2017/7.8 and 11.7213.2017/7.8.

Ключевые слова Aluminides, microhardness, nanohardness, solid α-solution, eutectic, structural components, concentration of elements, doping
Библиографический список

1. Hyde K. B., Norman A. F., Prangnell P. B. The effect of Ti on grain refinement in Al – Sc alloys. Materials Science Forum. 2002. Vols. 396–402. pp. 39–44.
2. Min Song, Yuehui He, Shanfeng Fang. Effect of Zr content on the yield strength of an Al – Sc alloys. Journal of Materials Engineering and Performance. 2011. Vol. 20, No. 3. pp. 377–381.
3. Dalen M. E., Dunand D. C., Seidman D. N. Effect of Ti additions on the nanostructure and creep properties of precipitation-strengthened Al – Sc alloys. Acta Materialia. 2005. Vol. 53, No. 15. pp. 4225–4235.
4. Royset J., Ryun N. Scandium in aluminium alloys. International Materials Reviews. 2005. Vol. 50, No. 1. pp. 19–44.
5. Norman A. F., Prangnell P. B., McEwen R. S. The solidification behavior of dilute aluminium-scandium alloys. Acta Materialia. 1998. Vol. 46, No. 16. pp. 5715–5732.
6. Marquis E. A., Seidman D. N. Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys. Acta Materialia. 2001. Vol. 49. pp. 1909–1919.
7. Harada Y., Dunand D. C. Microstructure of Al3Sc with ternary transitionmetal additions. Materials Science and Engineering: A. 2002. Vol. 329–331. pp. 686–695.
8. Costa S., Puga H., Barbosa J., Pinto A. M. P. The effect of Sc additions on the microstructure and age hardening behavior of as cast Al – Sc alloys. Materials and Design. 2012. Vol. 42. pp. 347–352.
9. Davydov V. G., Rostava T. D., Zakharov V. V., Filatov Y. A., Yelagin V. I. Scientific principles of making an alloying addition of scandium to aluminium alloys. Materials Science and Engineering: A. 2000. Vol. 280. pp. 30–36.
10. Rajinikanth V., Jindal V., Akkimardi V. G., Ghosh M., Venkateswarlu K. Transmission electron microscopy studies on the effect of strain on Al and Al – 1 % Sc alloy. Scripta Materialia. 2007. Vol. 57. pp. 425–428.
11. Zakharov V. V., Rostova T. D. Effect of scandium, transition metals, and admixtures on strengthening of aluminum alloys due to decomposition of the solid solution. Metal Science and Heat Treatment. 2007. Vol. 49. pp. 435–442.
12. Stock H. R., Khler B., Bomas H., Zoch H. W. Characteristics of aluminium-scandium alloy thin sheets obtained by physical vapour deposition. Materials & Design. 2010. Vol. 31. pp. 576–581.
13. Lee W. S., Chen T. H. Mechanical and microstructural response of aluminium-scandium (Al – Sc) alloy as function of strain rate and temperature. Materials Chemistry and Physics. 2009. Vol. 113. pp. 734–745.
14. Seidman D. N., Marquis E. A., Dunand D. C. Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys. Acta Materialia. 2002. Vol. 50. pp. 4021–4035.
15. Venkateswarlu K., Pathak L. C., Ray A. K., Das G., Verma P. K., Kumar A. Microstructure, tensile strength and wear behavior of Al – Sc alloy. Materials Science and Engineering: A. 2004. Vol. 383. pp. 374–380.
16. Alabin A. N., Belov N. A., Tabachkova N. Yu., Akopyan T. K. Heat resistant alloys of Al – Zr – Sc system for electrical applications: analysis and optimization of phase composition. Non-ferrous Мetals. 2015. No. 2. pp. 36–40. DOI: 10.17580/nfm.2015.02.07
17. Toropova L. S., Eskin D. G., Kharakterova M. L., Dobatkina T. V. Advanced Aluminum Alloys Containing Scandium: Structure and Properties. Amsterdam : Gordon and Breach Science publishers, 1988.
18. Belov N. A., Naumova E. A., Doroshenko V. V., Bazlova T. A. Effect of scandium on the phase composition and hardening of the Al – Ca – Si cast alloys. Izvestiya vuzov. Tsvetnaya metallurgiya. 2016. No. 5. pp. 61–68.
19. Oyset R., Ryun N. Scandium in aluminum alloys. International Materials Reviews. 2005. Vol. 50, No. 1. pp. 19–44.
20. Filatov Yu. A. Deformable Al – Mg – Sc alloys and possible regions of their application. Journal of Advanced Materials. 1995. No. 5. pp. 386–390.
21. Filatov Yu. A., Yelagin V. I., Zakharov V. V. New Al – Mg – Sc alloys. II. Materials Science and Engineering. 2000. Vol. A280. pp. 97–101.

22. Zolotorevskiy V. S., Belov N. A., Glazoff M. V. Casting Aluminum Alloys. Amsterdam : Elsevier, 2007.
23. Belov N. A., Savchenko S. V., Belov V. D. Atlas of microstructures of industrial silumins. Moscow : MISiS, 2009.

24. Mondolfo L. F. Aluminum Alloys: Structure and Properties. London, Boston : Butterworths, 1976.
25. Mester K., Rouxel B., Langan T., Lamb J., Barnett M., Dorin T. Understanding the Co-precipitation Mechanisms of Al3(Sc,Zr) with Strengthening Phases in Al – Cu – Li Model Alloys. Light Metals. 2018. pp. 233–239.
26. Yukun Li, Xiaodong Du, Ya Zhang, Zhen Zhang, Junwei Fu, Shi’ang Zhou, Yucheng Wu. Influence of Sc on microstructure and mechanical properties of Al – Si – Mg – Cu – Zr alloy. Applied Physics A. 2018. Vol. 124. pp. 144.
27. Starink M. J., Gao N., Yan J. L. The origins of room temperature hardening of Al – Cu – Mg alloys. Materials Science and Engineering: A. 2004. Vol. 387–389, No. 1-2 special issue. pp. 222–226.
28. Cochard A. Natural aging on Al – Cu – Mg structural hardening alloys – Investigation of two historical duralumins for aeronautics. Materials Science and Engineering: A. 2017. Vol. 690. pp. 259–269.
29. Royset J., Ryum N. Scandium in aluminium alloys. International Materials Reviews. 2005. Vol. 50, No. 1. pp. 19–44.
30. Norman A., Prangnell P., McEwen R. The solidification behavior of dilute aluminium-scandium alloys. Acta Materialia. 1998. Vol. 46, No. 16. pp. 5715–5732.
31. Bo H., Liu L. B., Jin Z. P. Thermodynamic analysis of Al – Sc, Cu – Sc and Al – Cu – Sc system. Journal of Alloys and Compounds. 2010. Vol. 490, No. 1. pp. 318–325.
32. Toropova L. S., Eskin D. G., Kharakterova M. L., Dobatkina T. V. Advances in Aluminum Alloys Containing Scandium. Amsterdam : Gordon and Breach Science publishers, 1998.
33. Kharakterova M. L. Phase composition of Al – Cu – Sc alloys at temperatures at 450 and 500 Deg. C. Izvestiya Akademii Nauk SSSR. Seriya Metally. 1991. Vol. 4. pp. 191–194.
34. Kharakterova M. L., Eskin D. G., Toropova L. S. Precipitation hardening in ternary alloys of the Al – Sc – Cu and Al – Sc – Si systems. Acta Metallurgica et Materialia. 1994. Vol. 42, No. 7. pp. 2285–2290.
35. Emadi D., Rao A. K. P., Mahfoud M. Influence of scandium on the microstructure and mechanical properties of A319 alloy. Materials Science and Engineering: A. 2010. Vol. 527, No. 23. pp. 6123–6132.
36. GOST 11069–2001. Primary aluminium. Grades. Introduced: 2003–01–01.
37. GOST 859–78. Copper. Grades. Introduced: 1979–01–01.
38. GOST 1467–93. Cadmium. Specifications. Introduced: 1997-01-01.
39. TU RB 100196035.005–2000. Covering and degassing flux. Available at: http://evtektika.com/ru/production.html#aluminium
40. TU RB 14744129.004–98. Degassing tablet with doping effect for hypereutectic silumins. Available at: http://evtektika.com/ru/production.html#aluminium
41. Krivopalov D. S., Nikitin V. I., Fedotov V. T. Petrunin S. S. Production and application of nanostructured addition alloys for Al alloys. Liteynoe proizvodstvo. 2014. No. 12. pp. 5–7.
42. GOST 859–2001. Copper. Grades. Introduced: 01.03.2002.

Language of full-text русский
Полный текст статьи Получить
Назад