Журналы →  Gornyi Zhurnal →  2019 →  №11 →  Назад

Название Application of generalized Hoek–Brown criterion to selection and design of mine support systems for the Oktyabrsky copper–nickel deposit: Case study
DOI 10.17580/gzh.2019.11.01
Автор Balandin V. V., Leonov V. L., Kuranov A. D., Bagautdinov I. I.
Информация об авторе

Polar Division, Norilsk Nickel Mining and Metallurgical Company, Norilsk, Russia:

V. V. Balandin, Director of the Oktyabrsky Mine, rudokt@nornik.ru
V. L. Leonov, Deputy Director of Mining Practice


Saint-Petersburg State Mining University, Saint-Petersburg, Russia:
A. D. Kuranov, Head of Laboratory, Candidate of Engineering Sciences
I. I. Bagautdinov, Senior Researcher, Candidate of Engineering Sciences


Selection and design of safe and efficient support systems for mines is a critical problem at the Oktyabrsky copper–nickel deposit. The deposit is composed of strong and hard rocks. The uniaxial compression strength of high-grade and disseminated ore is 70–120 and 95–150 MPa, respectively. The stress state is mostly gravitational. As per Russian regulatory documents (SP 91.13330.2012), parameters of horizontal and inclined underground excavations are calculated based on the estimated anticipated displacements in rock mass. This approach is inefficient in the geological conditions of the Oktyabrsky deposit. There are two approaches to the support system design. The conventional approach considers the support system as an engineering structure subjected to external loads. The other approach is based on the concept on interaction of the support and rock mass as a single deformable system. The Saint-Petersburg Mining University assumed the research object to be development headings and permanent openings with estimated span of 6 m and area not more than 25 m2, at the depth to 900 m. First, the rock mass quality was assessed using the Q-index by Barton. The support system design was determined by the Q support chart from Grimstad and Barton. The analysis shows that the Grimstad–Barton recommendations on the support system design can be restrictedly applied in the geological conditions of the Oktyabrsky deposit and need refinement. For this reason, additional calculations were performed for the specific conditions. The numerical modeling determined the possible fall zone parameters using the generalized Hoek–Brown criterion. It is assumed that the possible failure zone dimensions are not higher than the sizes of inelastic strain zones in sidewalls and roof of the mine workings. The determined dimension of the possible roof fall zone and the value of loads applied to support are the required parameters for any support system design for underground mines. Thus, in the article, the support system design is implemented for rock mass areas with the known rock quality by the Q-index. The scope of the support system design embraces the reinforced c concrete and reinforced polymer rock bolting, composite support composed of rock bolts and mesh reinforcement, shotcrete and arch-wise yielding support systems.
The authors appreciate participation of V. P. Marysyuk, Yu. N. Nagovitsyn and M. P. Sergunin in the study.

Ключевые слова Support, underground opening, rock bolt, rock fall zone, loads, rock mass quality by the Q-index
Библиографический список

1. Bulychev N. S., Fotieva N. N., Deev P. V. The Theory of Underground Structures Design has Gained Strength. Harmonising Rock Engineering and the Environment : Proceedings of the 12th ISRM International Congress on Rock Mechanics. Beijing, 2011. pp. 2031–2035.
2. Shu-Qian Duan, Xia-Ting Feng, Quan Jiang, Guo-Feng Liu, Shu-Feng Pei, Yi-Lin Fan. In Situ Observation of Failure Mechanisms Controlled by Rock Masses with Weak Interlayer Zones in Large Underground Cavern Excavations Under High Geostress. Rock Mechanics and Rock Engineering. 2017. Vol. 50, Iss. 9. pp. 2465–2493.
3. Behnia M., Masoud Cheraghi Seifabad. Stability analysis and optimization of the support system of an underground powerhouse cavern considering rock mass variability. Environmental Earth Sciences. 2018. Vol. 77, Iss. 18. 645. DOI: 10.1007/s12665-018-7835-2
4. Protosenya A. G., Karasev M. A., Belyakov N. A. Elastoplastic problem for noncircular openings under Coulomb’s criterion. Journal of Mining Science. 2016. Vol. 52, Iss. 1. pp. 53–61.
5. Protosenya A. G., Karasev M. A., Belyakov N. A. Numerical simulation of rock mass limit state using Stavrogin’s strength criterion. Journal of Mining Science. 2015. Vol. 51, Iss. 1. pp. 31–37
6. Protosenya A. G., Semenov V. I. Assessment of stress-strain conditions around single development with nonlinear rock-mass deformation. Zapiski Gornogo instituta. 2013. Vol. 204. pp. 209–213.
7. Karampinos E., Hadjigeorgiou J., Turcotte P. Discrete Element Modelling of the Influence of Reinforcement in Structurally Controlled Squeezing Mechanisms in a Hard Rock Mine. Rock Mechanics and Rock Engineering. 2016. Vol. 49, Iss. 12. pp. 4869–4892.
8. Cai M. Realistic Simulation of Progressive Brittle Rock Failure Near Excavation Boundary. Constitutive Modeling of Geomaterials: Advances and New Applications : Conference proceedings. Berlin : Springer-Verlag, 2013. pp. 303–312.
9. Esmaieli K., Hadjigeorgiou J., Grenon M. Stability Analysis of the 19A Ore Pass at Brunswick Mine Using a Two-Stage Numerical Modeling Approach. Rock Mechanics and Rock Engineering. 2013. Vol. 46, Iss. 6. pp. 1323–1338.
10. Weijian Yu, Genshui Wu, Baifu An. Investigations of Support Failure and Combined Support for Soft and Fractured Coal-Rock Tunnel in Tectonic Belt. Geotechnical and Geological Engineering. 2018. Vol. 36, Iss. 6. pp. 3911–3929.
11. Shu-cai Li, Hong-tao Wang, Qi Wang, Bei Jiang, Fu-qi Wang et al. Failure mechanism of bolting support and high-strength bolt-grouting technology for deep and soft surrounding rock with high stress. Journal of Central South University. 2016. Vol. 23, Iss. 2. pp. 440–448.
12. Mete Kun. The effect of shallow depth tunnelling on aboveground constructions. Arabian Journal of Geosciences. 2015. Vol. 8, Iss. 7. pp. 5247–5256.
13. Kubuzov E. A., Nagovitsyn Yu. N., Andreev A. A., Rukavishnikov G. D. Assessment of effect of rock mass damage on underground stability of excavations in the Second Southern Lens of Mayak Mine. Gornyi Zhurnal. 2016. No. 7. pp. 23–28. DOI: 10.17580/gzh.2016.07.05
14. Eremenko V. A., Aynbinder I. I., Patskevich P. G., Babkin E. A. Assessment of the state of rocks in underground mines at the Polar Division of Norilsk nickel. GIAB. 2017. No. 1. pp. 5–17.
15. Eremenko V. A., Lushnikov V. N. Procedure for selecting dynamic ground support for rockbursting mining conditions. GIAB. 2018. No. 12. pp. 5–12.
16. Kosyreva M. A., Eremenko V. A., Gorbunova N. N., Tereshin A. A. Support design using Unwedge software for mines of Nornickel’s Polar Division. GIAB. 2019. No. 8. pp. 57–64.
17. Louchnikov V. N., Eremenko V. A., Sandy M. P., Bucher R. Underground excavation support in deformable and rockburst-hazardous rock mass conditions. Gornyi Zhurnal. 2014. No. 4. pp. 37–43.
18. Barton N., Grimstad E. Forty Years with the Q-System in Norway and Abroad. Bergmekanikk/Geoteknikk : Conference. Oslo, 2014.
19. Hoek E., Carranza-Torres C., Corkum B. Hoek-Brown failure criterion – 2002 Edition. Proceedings of the Fifth North American Rock Mechanics Symposium. Toronto, 2002. Vol. 1. pp. 267–273.
20. Marysyuk V. P., Kisel A. A., Andreev A. A., Khutsishvili V. I. Peculiarities of support of mine workings with exposed surfaces of cyclopean concrete under rockburst-hazardous mining conditions. Gornyi Zhurnal. 2015. No. 6. pp. 80–84. DOI: 10.17580/gzh.2015.06.16

Language of full-text русский
Полный текст статьи Получить