Журналы →  Tsvetnye Metally →  2022 →  №4 →  Назад

Название Carbon monoxide and hydrogen reduction of metals from the B2O3 – CaO – FeO – PbО melts: thermodynamic modelling
DOI 10.17580/tsm.2022.04.03
Автор Vusikhis A. S., +Selivanov E. N., Leontiev L. I.
Информация об авторе

Institute of Metallurgy at the Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia:

A. S. Vusikhis, Senior Researcher, Candidate of Technical Sciences, e-mail: vas58@mail.ru
+E. N. Selivanov, Head of the Laboratory, Doctor of Technical Sciences
L. I. Leontiev, Principal Researcher, Doctor of Technical Sciences, Academican of RAS, e-mail: leo@presidium.ras.ru


A thermodynamic modelling procedure has been developed that enables to predict the results of metal reduction from oxide melt in bubbling units by building an almost-true-to-real-process model. The procedure involves determining an equilibrium for each introduced portion of gas while taking the concentrations of target metal oxides in every modelling cycle from the previous data. The resultant metal phases and gases are excluded from the following calculations. This approach helps make the models most true to real processes and analyze how complete the reactions are that take place in pyrometallurgical units. The authors use the above procedure to describe the processes of combined iron and lead reduction from the B2O3 – CaO – FeO – PbO melt by carbon monoxide and hydrogen. This paper includes a comparative analysis of how the temperature T and the amount of V СО or VН2 gas introduced can impact the reduction of lead and iron from an oxide melt. The B2O3/CaO ratio taken for the modelling purposes is equal to 3, which corresponds to eutectic composition. The initial concentration of components, wt. %: 58.5 В2О3; 19.5 СаО; 20.0 FeO; 2 PbО; the temperature range: 1273–1773 К. The calculations were carried out based on the disproportionation of FeO into Fe and Fe3O4. The interaction of FeO and Fe with PbO ensures a partial transition of lead in metallic state. Depending on the temperature, the degree of lead metallization can vary from 76.8 (at 1,273 К) to 19.4 % (at 1,773 К). As the temperature rises, the concentration of FeO and PbO in the melt tends to increase whereas that of Fe3O4 tends to decrease. The authors analyzed how the concentration of lead and iron oxides in the melt and their reduction degree changed depending on the amount of reducing agent introduced. In the case of lead and iron reduction, no difference in the resulting products was found when using hydrogen versus carbon monoxide as the reducing agent. At the same time, hydrogen reduction results in a more complete reaction compared with carbon monoxide reduction. Thus, a smaller amount of gas is required to achieve a close-to-100% reduction of lead: СО — 10÷13 dm3/kg, Н2 — 5.8÷10.1 dm3/kg. Higher temperatures lead to the transition of some of the lead in gas phase. The obtained data indicate that one should account for the disproportionation of FeO into Fe3O4 and Fe when analyzing the interaction between the reducing agent (carbon monoxide or hydrogen) and the B2O3 – CaO – FeO – PbО oxide melt in the bubbled layer, which is associated with the changing composition of the melt.
The work was conducted according to the State assignment of the Institute of Metallurgy of the RAS Ural branch (State registration of the theme No. 122020100404-2).

Ключевые слова Oxide melt, procedure, thermodynamic modelling, composition, reduction, gas, hydrogen, carbon monoxide, metal, iron, lead
Библиографический список

1. Shumskiy V. A. Role of the technical arrangement of the process to select lead feed smelting technology. Tsvetnye Metally. 2020. No. 2. pp. 18–29. DOI: 10.17580/tsm.2020.02.02.
2. Potylitsyn V. A., Tarasov A. V. Modern lead ore processing technology. Tsvetnaya metallurgiya. 2014. No. 6. pp. 29–42.
3. Püllenberg R., Rohkohl A. Modern Lead Smelting at the QSL-Plant Berzelius Metall in Stolberg, Germany. Lead-Zinc 2000. Warrendale, PA, USA, 2000. pp. 127–149.
4. Mounsey E. N., Piret N. L. A Review of Ausmelt Technology for Lead Smelting. Lead-Zinc 2000. Warrendale, PA, USA. 2000. pp. 149–170.
5. Zhanga H., Bao L., Chen Y., Xuanb W., Yuan Y. Efficiency improvements of the CO-Hmixed gas utilization related to the molten copper slag reducing modification. Process Safety and Environmental Protection. 2021. Vol. 146, No. 2. pp. 292–299.
6. Inano H., Tomita K., Tada T., Hiroyoshi N. Lead generation and separation mechanisms from lead silicate glass by reduction-melting. Journal of the Ceramic Society of Japan. 2018. Vol. 126, No. 8. pp. 595–601.
7. Seregin P. S., Popov V. A., Tsemekhman L. Sh. New methods of processing of materials, containing zinc, tin and lead. Tsvetnye Metally. 2010. No. 10. pp. 27–33.
8. Dikhanbaev B. I., Dikhanbaev A. B. Developing an energy-efficient technique for industrial waste processing. Kompleksnoe ispolzovanie mineralnogo syrya. 2019. No. 4. pp. 82–92.
9. Shtoyk S. G., Tsemekhman L. Sh., Seregin P. S., Popov V. A., Paretskiy V. M. et al. Distribution of lead in direct lead ore smelting products: Thermodynamic modelling. Tsvetnaya metallurgiya. 2011. No. 2. pp. 32–37.
10. Dosmukhamedov N. K., Fedorov A. N., Zholdasbay E. E. The thermodynamics of natural gas reduction depletion of the Cu – Me – Fe – O – SiO2 (Me – Pb, Zn, As) system. Mezhdunarodnyy zhurnal prikladnykh i fundamentalnykh issledovaniy. 2019. No. 9. pp. 61–68.
11. Slag Atlas. 2nd Edition. Edited by Verien Deutscher Eisenhüttenleute (VDEh). Düsseldorf : Verlag Stahleisen GmdH, 1995. 616 p.
12. Vatolin N. A., Moiseev G. K., Trusov B. G. Thermodynamic modelling of high-temperature inorganic systems. Moscow : Metallurgiya, 1994. 352 p.
13. Belov G. V., Trusov B. G. Thermodynamic modelling of chemically reacting systems. Moscow : MGTU imeni N. E. Baumana, 2013. 96 p.
14. Boronenkov V., Zinigrad M., Leontiev L., Pastukhov E., Shalimov M. et al. Phase interaction in the metal-oxide melts-gas system: the Modeling of Structure, Properties and Processes. Heidelberg, Springer-Verlag Berlin, 2012. 614 р.
15. Vusikhis A. S., Dmitriev A. N. Understanding the processes behind reduction of metal oxides from the melt using a reducing gas in bubbled layer. Vestnik UGTU – UPI. 2004. No. 15, Part 1. pp. 93–95.
16. Vusikhis A. S., Selivanov E. N., Tyushnyakov S. N., Chentsov V. P. Carbon monoxide reduction of metals from the B2O3 – СaO – Ni(Zn,Pb,Cu)O melts: Thermodynamic modelling. Butlerovskie soobshcheniya. 2019. Vol. 59, No. 9. pp. 125–131.
17. Vusikhis A. S., Leontiev L. I., Kudinov D. Z., Selivanov E. N. Nickel and iron reduction from a multi-component silicate melt in bubbled layer: Thermodynamic modelling. Note 2. Reducing agent – Н2 – Н2О mixture. Izvestiya. Ferrous Metallurgy. 2018. Vol. 61, No. 10. pp. 794–799.
18. Vusikhis A. S., Leontiev L. I., Selivanov E. N., Chentsov V. P. Simulation of combined reduction of iron and non-ferrous metals (nickel, copper, lead and zinc) from oxide melts by converted methane. Vestnik Irkutskogo gosu darstvennogo tekhnicheskogo universiteta. 2020. Vol. 24, No. 5. pp. 1113–1125.
19. Dmitriev A. N., Vusikhis A. S., Sitnikov V. A., Leontiev L. I., Kudinov D. Z. Thermodynamic modeling of iron oxide reduction by hydrogen from the B2O3 – CaO – FeO melt in bubbled layer. Israel Journal of Chemistry. 2007. Vol. 47, No. 3-4. pp. 299–302.
20. Bannykh O. A., Budberg P. B., Alisova S. P. et al. Binary and multi-component systems with iron: Constitutional diagrams. Reference book. Moscow : Metallurgiya, 1986. 440 p.

Language of full-text русский
Полный текст статьи Получить