Журналы →  Tsvetnye Metally →  2022 →  №10 →  Назад

Название Effect of reactor irradiation on the elemental composition, sizes and crystal structure of second phase precipitates in zirconium alloys E110 and E635
DOI 10.17580/tsm.2022.10.01
Автор Obukhov A. V., Kobylyanskiy G. P.
Информация об авторе

RIAR JSC, Dimitrovgrad, Russia:

A. V. Obukhov, Senior Researcher at the Department of Reactor Materials Science, Candidate of Technical Sciences, e-mail: micron1803@mail.ru
G. P. Kobylyanskiy, Lead Researcher at the Department of Reactor Materials Science, Doctor of Technical Sciences, e-mail: gpk@niiar.ru


Using transmission electron microscopy, the authors of this paper looked at the effect of reactor irradiation in the temperature ranges of 40 to 70 and 290 to 340 oC on the elemental composition, crystal structure and particle sizes of the second phases in zirconium alloys E110 and E635. Regularities have been established behind redistribution of elements between the second phase particles and the solid solution of the surrounding matrix in the above alloys as a function of a rising dose and a changing irradiation temperature. The authors note that the redistribution of elements between the structural components of the above zirconium alloys follows a similar pattern in both the experimental reactor BOR-60 and the power reactor VVER-1000. A difference is shown in the effect produced by irradiation on the morphology and elemental composition of β-Nb phase and Laves phase precipitates in the above zirconium alloys in the low temperature region of 40 to 70 oC and in the temperature range of 290 to 340 oC. It is noted that the Laves phase particles become amorphous as the result of low-temperature irradiation, whereas the β-Nb particles retain their BCC structure. The authors offer their interpretation with regard to the staged transformation of the Laves phase HCP monocrystal structure into the BCC polycrystal structure induced by rising irradiation dose. The role of iron is shown as it leaves the Laves phase and enters the surrounding matrix during crystal lattice transformation. The paper describes stages when fine dispersed irradiation-induced particles appear in alloys E110 and E635 and when they change their size and concentration as the irradiation dose keeps rising. The difference between the particles are also noted in the said alloys.

Ключевые слова Second phase precipitates, irradiation, temperature, elemental composition, particle size, concentration, crystal lattice, transformation
Библиографический список

1. Zaymovskiy A. S., Nikulina A. V., Reshetnikov N. G. Zirconium alloys in nuclear power industry. Moscow : Energoizdat, 1981. 232 p.
2. Azhazha V. M., Vyugov P. N., Lavrinenko S. D., Lindt K. A., Mukhachev A. P. et al. Zirconium and its alloys: Production, application : A review. Kharkov : NNTs KhFTI, 1998. 89 p.
3. Griffiths M. A. Review of Microstructure evolution in zirconium alloys during irradiation. Journal of Nuclear Materials. 1988. Vol. 159. pp. 190–218.
4. Shishov V. N. The evolution of microstructure and deformation stability in Zr – Nb – Fe (Sn,O) alloys under neutron irradiation. Zirconium in the nuclear industry: 16th International Symposium. ASTM STP. 2012. Vol. 1529. pp. 37–66.
5. Grigoriev E. G., Perlovich Yu. A., Soloviev G. I., Udovskiy A. L., Yakushin V. L. Material physics: Textbook for university students. Ed. by B. A. Kalin. Vol. 4. The physical basis of strength. Nuclear solid-body physics. Computer modelling. Moscow : MIFI, 2021. 624 p.
6. Sagalov S. S., Obukhov A. V., Belozerova A. R., Zakharova L. V. The dose damaging fuel claddings after their operation in VVER-1000 reactors determined through modelling and experiments. RIAR research papers. 2021. Iss. 1. pp. 37–49.
7. Obukhov A. V., Kobylyanskiy G. P. Radiation damageability of alloy E110 under high-dose guide tube irradiation in experimental reactor MIR. RIAR research papers. 2018. Iss. 4. pp. 3–11.
8. Svetukhin S. S., Lvov P. E., Novoselov A. E., Kobylyanskiy G. P., Shishov V. N. Modelling the growth of niobium precipitates in Zr – 1 % Nb alloy under irradiation. University proceedings. Volga region. Physical and mathematical sciences. 2007. No. 4. pp. 105–111.
9. Shishov V. N., Peregud M. M., Nikulina A. V. et al. Influence of zirconium alloy chemical composition on microstructure formation and irradiation induced growth. Zirconium in the Nuclear Industry: 13th International Symposium. ASTM STP. 2002. Vol. 1423. pp. 758–779.
10. Kalin B. A., Platonov P. A., Chernov I. I., Shtrombakh Ya. I. Material physics : Textbook for university students. Ed. by B. A. Kalin. Vol. 6. Part 1. Structural materials in nuclear engineering. Moscow : MIFI, 2021. 636 p.
11. Doriot S., Verhaeghe B., Bechade J.-L. et al. Microstructural evolution of M5™ alloy irradiated in PWRs up to high fluences-comparison with other Zr-based alloys. Zirconium in the nuclear industry: 17th International Symposium. ASTM STP. 2015. Vol. 1543. pp. 759–799.
12. Charquet D., Hahn R., Ortlieb E., Gros J.-P., Wadier J.-F. Solubility limits and formation of intermetallic precipitates in Zr – Sn – Fe – Cr alloys. Zirconium in the Nuclear Industry: 8th Symposium. ASTM STP. 1988. Vol. 1023. pp. 405–422.

Language of full-text русский
Полный текст статьи Получить