Журналы →  Gornyi Zhurnal →  2022 →  №12 →  Назад

Название Hardening soil model in prediction of plastic deformation zone in soft rock mass of Yakovlevo iron ore deposit
DOI 10.17580/gzh.2022.12.03
Автор Bagautdinov I. I., Belyakov N. A., Sevryukov V. V., Rasskazov M. I.
Информация об авторе

Saint-Petersburg Mining University, Saint-Petersburg, Russia:

I. I. Bagautdinov, Leading Researcher, Candidate of Engineering Sciences, bagautdinov_ii@pers.spmi.ru
N. A. Belyakov, Associate Professor, Candidate of Engineering Sciences


Yakovlevsky GOK, Belgorod, Russia:
V. V. Sevryukov, Head of Engineering Department


Institute of Mining, Far East Branch, Russian Academy of Sciences, Khabarovsk, Russia:
M. I. Rasskazov, Researcher


The authors propose a sizing procedure for the zone of plastic deformation (possible failure) in rock mass in the vicinity of stoping using the method of numerical modeling and the Hardening Soil Model (HSM). The relevance of HSM application in the conditions of Yakovlevo deposit is confirmed, among other things, by the dependence of the deformation modulus of rocks in the volumetric stress state on the effective stresses. The subject of research is the Yakovlevo deposit of high-grade iron ore, which holds the largest reserves in the Belgorod Region of the Kursk Magnetic Anomaly. Stoping and mine support operations induce continuous rock falls and caving because of the unreliable prediction of rock mass stability in the vicinity of stoping and due to the low strength of enclosing rock mass. Selection and validation of HSM parameters for iron–mica–martite ore of Yakovlevo deposit included processing of laboratory testing results obtained using equipment of the Saint-Petersburg Mining University. The triaxial tests of ore samples at different values of lateral pressure were computationally reduced to a reference abutment pressure value pref set by the software designer. The numerical experiments and virtual testing of the material behavior model, as well as the justification of the possible failure zone size were implemented in the certified software environment Bentley Systems PLAXIS-3D. Finally, on the basis of the integrated research of different-density ore samples, including laboratory tests and numerical experiments, the rock mass behavior models are constructed and the parameters of plastic deformation zones (possible failure) in the vicinity of a single stone are predicted.
The study was supported under the state contract for scientific work in 2021, Grant No. FSRW-2020-0014.

Ключевые слова iron ore, numerical modeling, laboratory tests, plastic deformation zone, triaxial testing, HSM
Библиографический список

1. Yingjie Xia, Hui Zhou, Chuanqing Zhang, Shihai He, Yang Gao et al. The evaluation of rock brittleness and its application: A review study. European Journal of Environmental and Civil Engineering. 2019. Vol. 23. DOI: 10.1080/19648189.2019.1655485
2. Zhihao Kuang, Shili Qiu, Shaojun Li, Shihui Du, Yong Huang et al. A New Rock Brittleness Index Based on the Characteristics of Complete Stress–Strain Behaviors. Rock Mechanics and Rock Engineering. 2021. Vol. 54, Iss. 3. pp. 110 9–1128.
3. Duncan J. M., Chang C.-Y. Nonlinear analysis of stress and strain in soil. Journal of the Soil Mechanics and Foundations Division. 1970. Vol. 96. pp. 1629–1653.
4. Schanz T., Vermeer P. A., Bonnier P. G. The hardening soil model: Formulation and verification. Beyond 2000 in Computational Geotechnics: Ten Years of Plaxis International : Proceedings of the International Symposium. Rotterdam : A.A. Balkema, 1999. pp. 281–296.
5. Melnikov R. V. Oedometer test data for finding Hardening Soil model parameters. Akademicheskiy vestnik UralNIIproekt RAASN. 2014. No. 4. pp. 90–94.
6. Orekhov V. V., Orekhov M. V. Using hardening soil model for describing the behavior of varied density sandunder the load. Vestnik MGSU. 2014. No. 2. pp. 91–97.
7. Melnikov R. V., Sagitova R. Kh. Calibration of “Hardening Soil” model parameters according to the results of laboratory testing in program “Soiltest”. Akademicheskiy vestnik UralNIIproekt RAASN. 2016. No. 3(30). pp. 79–83.
8. Quoc Thien Huynh, Van Qui Lai, Tirawat Boonyatee, Suraparb Keawsawasvong. Verification of soil parameters of hardening soil model with small-strain stiffness for deep excavations in medium dense sand in Ho Chi Minh City, Vietnam. Innovative Infrastructure Solutions. 2022. Vol. 7, Iss. 1. 15. DOI: 10.1007/s41062-021-00621-x

9. Shong-Loong Chen, Shen-Chung Lee, Yu-Syuan Wei. Numerical Analysis of Ground Surface Settlement Induced by Double-O Tube Shield Tunneling. Journal of Performance of Constructed Facilities. 2016. Vol. 30, Iss. 5. DOI: 10.1061/(ASCE)CF.1943-5509.0000732
10. Mirnyi A. Yu., Ter-Martirosyan A. Z. Applications of modern mechanical soil models. Geotekhnika. 2017. No. 1. pp. 20–26.
11. Protosenya A. G., Kuranov A. D. Procedure of rock mass stress–strain state forecasting in hybrid mining of the Koashvin deposit. Gornyi Zhurnal. 2015. No. 1. pp. 17–20. DOI: 10.17580/gzh.2015.01.03
12. Litvinenko V. S., Dvoynikov M. V., Trushko V. L. Elaboration of a conceptual solution for the development of the Arctic shelf from seasonally flooded coastal areas. International Journal of Mining Science and Technology. 2022. Vol. 32, Iss. 1. pp. 113–119.
13. Litvinenko V. S., Tsvetkov P. S., Dvoynikov M. V., Buslaev G. V. Barriers to implementation of hydrogen initiatives in the context of global energy sustainable development. Journal of Mining Institute. 2020. Vol. 244. pp. 428–438.
14. Marysyuk V. P., Darbinyan T. P., Andreev A. A., Noskov V. A. Efficiency of modification of the copper–nickel sulfide ore mining system in the Oktyabrsky mine. Gornyi Zhurnal. 2019. No. 11. pp. 19–23. DOI: 10.17580/gzh.2019.11.02
15. Kuranov A. D., Bagautdinov I. I., Kotikov D. A., Zuev B. Yu. Integrated approach to safety pillar stability in slice mining in the Yakovlevo deposit. Gornyi Zhurnal. 2020. No. 1. pp. 115–119. DOI: 10.17580/gzh.2020.01.23
16. Rasskazov I. Yu., Kursakin G. A., Potapchuk M. I., Rasskazov M. I. Geomechanic assessment of technological decisions for designing mining operations in of burst hazardous conditions. Journal of Mining Institute. 2012. Vol. 198. pp. 80–85.
17. Karasev M. A., Buslova M. A., Vilner M. A., Nguyen T. T. Method for predicting the stress-strain state of the vertical shaft lining at the drift landing section in saliferous rocks. Journal of Mining Institute. 2019. Vol. 240. pp. 628–637.
18. Kozyrev A. A., Panin V. I., Semenova I. E., Rybin V. V. Geomechanical support of mining operations in mines of the Murmansk Region. Gornyi Zhurnal. 2019. No. 6. pp. 45–50. DOI: 10.17580/gzh.2019.06.05
19. PLAXIS 2D. Bentley Systems, Inc., 2022. Available at: https://www.bentley.com/software/plaxis-2d/ (accessed: 15.06.2022).

Language of full-text русский
Полный текст статьи Получить