Журналы →  Chernye Metally →  2023 →  №5 →  Назад

55 years of the Department of Rolling and Drawing Production of the Magnitogorsk State Technical University named after G. I. Nosov
Название Development of new approaches to improve the technology for production of high-quality rolled metal for enameling
DOI 10.17580/chm.2023.05.04
Автор E. M. Golubchik, D. N. Chikishev, O. A. Kupriyanova
Информация об авторе

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:

E. M. Golubchik, Dr. Eng., Prof., Dept. of Materials Processing Technologies, Associate Prof., e-mail: e.golubchik@magtu.ru
D. N. Chikishev, Dr. Eng., Prof., Dept. of Materials Processing Technologies, Associate Prof., e-mail: d.chikishev@magtu.ru
O. A. Kupriyanova, Cand. Eng., Associate Prof., Dept. of Materials Processing Technologies, e-mail: o.nikitenko@magtu.ru


The article describes a fundamentally new approach to improving the technology for the production of high-quality rolled metal for enamelling. It has been established that the most significant technological factors influencing the quality of such rolled metal products are the temperature and speed conditions of hot rolling and coiling of the strip on a wide-strip mill, as well as the strategy for cooling the surface of the strip on the discharge roller table. To assess the quality level of rolled metal for enamelling, the indicator of steel resistance to hydrogen embrittlement is traditionally used, which is determined on the basis of laboratory bending of samples-plates from rolled metal. If the values fall within the allowable ranges, it must be guaranteed (with a certain degree of probability) that there is no “fish scale” defect on the enamelled products. However, the traditional methods for determining the propensity of rolled metal products to the formation of a “fish scale” defect today can be considered outdated, of a subjective nature and requiring significant updating. Therefore, it is proposed to apply a new quality indicator - the volume fraction of structurally free cementite in the microstructure of rolled metal. The article considers a new research methodology for determining the proposed indicator using digital technologies. It has been proven that an insufficient level of structurefree cementite in the microstructure of rolled products increases the tendency to form a “fish scale” defect. The high content of cementite globules (more than 2.7%) makes it possible to effectively capture and retain hydrogen and prevent its release to the surface of the product, which guarantees the absence of a “fish scale” defect. An innovative technology of wide-strip hot rolling has been developed, which makes it possible to provide high values of the volume fraction of cementite in the microstructure of rolled metal.

Ключевые слова Rolling for enameling, “fish scale” defect, hydrogen embrittlement index, microstructure, volume fraction of cementite, hot rolling
Библиографический список

1. GOST 24244–2018. Cold rolled low carbon steel sheet for enamelling. Introduced: 01.04.2019.
2. Lin Y., Chiang L., Lin Y., Yen H. New approaches in understanding the effects of hydrogen trapping and the fishscaling resistance of enameled steels. Surface and Coatings Technology. 2020. Vol. 399. 126135.
3. Zhao Y., Huang X., Yu B., Chen L., Liu X. Influence of boron addition on microstructure and properties of a low-carbon cold rolled enamel steel. Procedia Engineering. 2017. Vol. 207. pp. 1833–1838.
4. Zhao Y., Huang X., Yu B., Yuan X., Liu X. Effect of coiling temperature on microstructure, properties and resistance to fish-scaling of hot rolled enamel steel. Materials. 2017. Vol. 10. p. 1012.
5. Liu Z., Li W., Shao X., Kang Y., Li Y. An ultra-low-carbon steel with outstanding fish-scaling resistance and cold formability for enameling applications. Metallurgical and Materials Transactions A. 2019. Vol. 50. pp. 1805–1815.
6. Dong F., Du L., Liu X., Xue F. Optimization of chemical compositions in low-carbon Al-killed enamel steel produced by ultra-fast continuous annealing. Materials Characterization. 2013. Vol. 84. pp. 81–87.
7. Romanov B. P. Processes of self-organization on structure-formation of glass-enamel coating under the effect of electromagnetic emission from electrophyssical heating sources. V Russian-Chinese International Symposium «Advanced materials and processes», Baikalsk, 1999. p. 246.
8. Pettsold А., Peshmann G. Enamel and enamelling. Reference book. Moscow: Metallurgiya, 1990. 576 p.
9. Bragina L. Glass ceramic coatings for ferrous metals protection. Proc. of 20th Intern. Enamellers Congr., 15–19 May, 2005, Istanbul. 2005. pp. 23–34.
10. Lazutkina О. R., Kazak А. К., Didenko V. V., Mirova Т. V. Enamel production. Yekaterinburg: UrFU, 2010. 127 p.
11. Pagliuca S., Faust W. D. Porcelain (vitreous) enamelsand industrial enamelling processes. Mantova: Tipografia Commerciale, 2011. 900 p.
12. Huang X., Zhang Z., Liu X., Zhao Y., Li X. Variations of microstructure and resistance to fishscaling of a hot rolled enamel steel before and after enamel firing. Journal of Materials Research and Technology. 2021. Vol. 11. pp. 466–473.
13. Winzer N., Rott O., Thiessen R., Thomas I., Mraczek K. et al. Hydrogen diffusion and trapping in Ti-modified advanced high strength steels. Materials and Design. 2016. Vol. 92. pp. 450–461.
14. Takahashi J., Kawakami K., Kobayashi Y., Tarui T. The first direct observation of hydrogen trapping sites in TiC precipitation-hardening steel through atom probe tomography. Scripta Materialia. 2010. Vol. 63. pp. 261–264.
15. Dong F., Du L., Liu X., Hu J., Xue F. Effect of Ti(C, N) precipitation on texture evolution and fish-scale resistance of ultra-low carbon Ti-bearing enamel steel. Journal of Iron and Steel Research, International. 2013. Vol. 20. pp. 39–45.
16. Chikishev D. N., Golubchik E. М., Avramenko А. А., Nikitenko О. А., Potaptsev D. М., Fomin М. Yu., Strugov S. S. Study of the microstructure features of rolled products made of 08YuR grade steel with an assessment of its effect on hydrogen saturation to determine the tendency to form a “fish scale” defect on enameled rolled products. Vestnik YuUrGU. Seriya «Metallurgiya». 2021. Vol. 21. No. 3. pp. 31–39.
17. Chikishev D. N., Golubchik E. М., Nikitenko О. А., Shiryaeva Е. N., Kolyada Т. V. Implementation of new approaches to the production of high-quality rolled metal for enameling. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2022. Vol. 78. No. 1. pp. 46–52.
18. Golubchik E. М., Chikishev D. N. Development of a new indicator for assessing the quality of rolled metal for enameling and methods for its determination. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2022. Vol. 20. No. 4 (42). pp. 95–101.
19. Mirzaev D. А., Yakovleva I. L., Tereshchenko N. А., Tabatchikova T. I., Okishev К. Yu., Mirzoev А. А., Verkhovykh А. V. Possibilities of capturing hydrogen atoms in steels by ferrite/cementite interfaces. 2. Theory of adsorption. Vestnik YuUrGU. Seriya "Metallurgiya". 2014. Vol. 14. No. 3. pp. 30–36.
20. GOST 5640–68. Steel. Metallographic method for determination of microstructure of sheets and bands. Introduced: 01.01.1970.
21. GOST 7564–97. Rolled products. General rules of sampling, rough specimens and test pieces for mechanical and technological testing. Introduced: 01.01.1999.

Language of full-text русский
Полный текст статьи Получить