Журналы →  Gornyi Zhurnal →  2023 →  №5 →  Назад

GEOTECHNICAL CONDITIONS OF MINING
Название Integrated experimental research of mechanical properties of rocks: Problems and solutions
DOI 10.17580/gzh.2023.05.02
Автор Ilinov M. D., Korshunov V. A., Pospekhov G. B., Shokov A. N.
Информация об авторе

Research Center for Geomechanics and Mining Practice Problems, Saint-Petersburg Mining University, Saint-Petersburg, Russia:

M. D. Ilinov, Head of Laboratory, Candidate of Engineering Sciences, Ilinov_md@spmi.ru
V. A. Korshunov, Leading Researcher, Candidate of Engineering Sciences
G. B. Pospekhov, Leading Researcher, Associate Professor, Candidate of Geological and Mineralogical Scientists
A. N. Shokov, Senior Researcher, Candidate of Engineering Sciences

Реферат

From the standpoint of modeling of real-life rock mass processes, the main problems of mechanical rock testing are connected with the limitation of sampling and low quality of samples; with weak representativity of actual data to model rock mass structure, stresses strains, rock failure mechanism and testing conditions, as well as with the deficient information content of modern determination procedures. The authors put forward an integrated approach to the analysis of mechanical properties of rocks, within which the tests are accompanied by the models of deformation and failure processes running in a real-life rock mass. In particular, it is recommended to model stress redistribution in a sample similar to the complex nonuniform stress state of rock mass, when a number of types of failure materialize (tension, shear and quasi-plastic deformation under high pressure). It is necessary to modify the approach to the rock mass strength assessment by plotting a family of failure envelopes for representative rock mass structures using the pooled data of integrated direct, indirect and correlation methods of sample properties determination. To this effect, the tests of the regular shape samples should be supplemented by the tests of the irregular shape samples using spherical indenters, to provide a complete set of strength characteristics of representative rock structures. When it is impossible to carry out the integrated testing, it is recommended to find basic characteristics of strength and deformability of rocks from correlation dependences based on the elementary information on functional characteristics of monolith samples.

Ключевые слова Modeling, rock mass, monolith rock, fractured rock, fracture, strength, residual strength, spherical indenter, direct testing, indirect testing
Библиографический список

1. Muller L. Rock mass behavior—Determination and application in engineering practice. Advances in rock mechanics : Proceedings of the Third Congress of the International Society for Rock Mechanics. Denver, 1974. pp. 205–215.
2. Kyznetsov G. N. Mechanical properties of rocks. Ground control : Problems and methods. Moscow : Ugletekhizdat, 1947. 180 p.
3. Goncharov I. G. Strength of stone materials in different stress state. Leningrad–Moscow : Gosstroyizdat, 1960. 124 p.
4. Yagodkin G. I., Mokhnachev M. P., Kuntysh M F. Strength and deformability of rocks in loading. Moscow : Nauka, 1971. 148 p.
5. Kartashov Yu. M., Matveev B. V., Mikheev G. V., Fadeev A. B. Durability and deformability of rocks. Moscow : Nedra, 1979. 269 p.
6. Stavrogin A. N., Protosenya A. G. Rock deformation and fracture mechanics. Moscow : Nedra, 1992. 224 p.
7. Protodyakonov M. M., Voblikov V. S., Ilnitskaya E. I. Strength testing procedure for irregular shape rock samples. Moscow : IGD im. A. A. Skochinskogo, 1961. 8 p.
8. Tien Tai Nguyen, Ngoc Anh Do, Karasev M. A., Dang Van Kien, Dias D. Influence of tunnel shape on tunnel lining behavior. Geotechnical Engineering. 2021. Vol. 174, Iss. 4. pp. 355–371.
9. Gospodarikov A. P., Trofimov A. V., Kirkin A. P. Evaluation of deformation characteristics of brittle rocks beyond the limit of strength in the mode of uniaxial servohydraulic loading. Journal of Mining Institute. 2022. Vol. 256. pp. 539–548.

10. Barton N. Shear strength criteria for rock, rock joints, rockfill and rock masses: Problems and some solutions. Journal of Rock Mechanics and Geotechnical Engineering. 2013. Vol. 5, Iss. 4. pp. 249–261.
11. Sulukcu S., Ulusay R. Evaluation of the block punch index test with particular reference to the size effect, failure mechanism and its effectiveness in predicting rock strength. International Journal of Rock Mechanics and Mining Sciences. 2001. Vol. 38, Iss. 8. pp. 1091–1111.
12. Bieniawski Z. T. Estimating the strength of rock materials. Journal of the Southern African Institute of Mining and Metallurgy. 1974. Vol. 74, No. 8. pp. 312–320.
13. Singh H. K., Basu A. Evaluation of existing criteria in estimating shear strength of natural rock discontinuities. Engineering Geology. 2018. Vol. 232. pp. 171–181.
14. Glushikhin F. P., Kuznetsov G. N., Shklyarskiy M. F., Pavlov V. N., Zolotnikov M. S. Modeling in geomechanics. Moscow : Nedra, 1991. 240 p.
15. Karasev M. A., Nguyen T. T. Method for predicting the stress state of the lining of underground structures of quasi-rectangular and arched forms. Journal of Mining Institute. 2022. Vol. 257. pp. 807–821.
16. Zuev B. Yu., Zubov V. P., Fedorov A. S. Application prospects for models of equivalent materials in studies of geomechanical processes in underground mining of solid minerals. Eurasian Mining. 2019. No. 1. pp. 8–12. DOI: 10.17580/em.2019.01.02
17. Ignatyev S. A., Sudarikov A. E., Imashev A. Z. Modern Mathematical Forecast Methods of Maintenance and Support Conditions for Mining Tunnel. Journal of Mining Institute. 2019. Vol. 238. pp. 371–375.
18. Fisenko G. L. Methods of quantitative evaluation of structural weakening in rocks in the rock stability analysis. Current Problems of Rock Mechanics : The Fourth All-Russian Conference on Rock Mechanics. Leningrad : Nauka, 1972. pp. 21–29.
19. Labuz J. F., Arno Zang. Mohr–Coulomb Failure Criterion. Rock Mechanics and Rock Engineering. 2012. Vol. 45, Iss. 6. pp. 975–979.
20. Barton N. Shear strength criteria for rock, rock joints, rockfill and rock masses: Problems and some solutions. Journal of Rock Mechanics and Geotechnical Engineering. 2013. Vol. 5, No. 4. pp. 249–261.
21. Tarasov B. G. Deformation and failure patterns in rocks in high pressure : Thesis of Dissertation ... of Doctor of Engineering Sciences. Saint-Petersburg. 46 p.
22. Pankov I. L., Morozov I. A. Salt Rock Deformation under Bulk Multiple-Stage Loading. Journal of Mining Institute. 2019. Vol. 239. pp. 510–519.
23. Protosenya A. G., Iovlev G. А. Prediction of spatial stress–strain behavior of physically nonlinear soil mass in tunnel face area. GIAB. 2020. No. 5. pp. 128–139.
24. Ladanyi B., Archambault G. Simulation of shear behavior of a jointed rock mass. Rock Mechanics: Theory and Practice : Proceedings of the 11th Symposium on Rock Mechanics. Berkeley, 1969. pp. 105–125.
25. Eberhardt E. The Hoek–Brown Failure Criterion. Rock Mechanics and Rock Engineering. 2012. Vol. 45, Iss. 6. pp. 981–988.
26. Protodyakonov M. M. Generalized equation of the Mohr envelopes. Analysis of Physical and Mechanical Properties of Rocks in the Context of Ground Control : Collected Works. Moscow : Izdatelstvo Akademii nauk SSSR, 1962. pp. 82–89.
27. Thanh Nguyen Chi, Gospodarikov A. Hyperstatic reaction method for calculations of tunnels with horseshoe-shaped cross-section under the impact of earthquakes. Earthquake Engineering and Engineering Vibration. 2020. Vol. 19, No. 1. pp. 179–188.
28. Korchak P. A. Geomechanical prediction of growth of brittle fracture zones in the vicinity of underground excavations in over-stress rock mass. GIAB. 2021. No. 5. pp. 85–98.
29. Patton F. D. Multiple modes of shear failure in rock. Proceedings of the 1st Congress of the International Society of Rock Mechanics. Lisbon, 1966. Vol. 1. pp. 509–513.
30. Chirkov S. E. Influence of size effect on coal strength. Moscow : Nauka, 1969. 114 p.
31. Alekseev A. V., Iovlev G. A. Adjustment of hardening soil model to engineering geological conditions of Saint-Petersburg. GIAB. 2019. No. 4. pp. 75–87.
32. Mikheev G. V. Solid Rock Strength and Deformability. Analysis and Express-Method : Theses of Dissertation of Candidate of Engineering Sciences. Leningrad, 1972. 22 p.
33. Franklin J. A. Suggested method for determining point load strength. International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts. 1985. Vol. 22, Iss. 2. pp. 51–60.
34. Yakubovskiy M. M., Mikhailova E. A., Bazhukov A. A. Reasons of efficiency of surface miners in selective coal cutting under low temperatures. GIAB. 2021. No. 10. pp. 42–57.
35. Pavlovich A. A., Korshunov V. A., Bazhukov A. A., Melnikov N. Ya. Estimation of Rock Mass Strength in Open-Pit Mining. Journal of Mining Institute. 2019. Vol. 239. pp. 502–509.

Полный текст статьи Integrated experimental research of mechanical properties of rocks: Problems and solutions
Назад