Журналы →  Chernye Metally →  2023 →  №8 →  Назад

NEW DEVELOPMENTS OF THE MENDELEEV UNIVERSITY OF CHEMICAL TECHNOLOGY OF RUSSIA FOR METALLURGY
40 years of the Department of Industrial Ecology
Название The use of metallurgical slag in the production of building materials as a direction for the formation of a circular economy
DOI 10.17580/chm.2023.08.12
Автор I. O. Tikhonova, E. N. Potapova, A. A. Volosatova, T. V. Guseva
Информация об авторе

Mendeleev University of Chemical Technology of Russia, Moscow, Russia:

I. O. Tikhonova, Cand. Eng., Associate Prof., Dept. of Industrial Ecology, e-mail: tikhonova.i.o@muctr.ru
E. N. Potapova, Dr. Eng., Prof., Dept. of Chemical Technology of Composite and Binder Materials

 

Scientific and Research Institute “Environmental Industrial Policy Center”, Moscow, Russia:

A. A. Volosatova, Deputy Director
T. V. Guseva, Dr. Eng., Prof., Deputy Director

Реферат

The article presents results of the analysis of approaches to using metallurgical slags in the production of construction materials. It is emphasized that increasing production resource efficiency and forming circular economy meets the Russian Federation national development goals and at the same time contributes towards the achievement of sustainable development goals. It is noted that the concept of industrial ecosystems (industrial symbioses) was developed by the Russian school of industrial ecology in the middle of the last century. From a scientific point of view, the proximity of such a system to the natural one is determined by the share of secondary resources used in metallurgical production, and the extent to which secondary resources formed in metallurgical production are involved in the technological processes of installations acting as members of industrial symbiosis. A practical example of an industrial ecosystem functioning in the town of Novotroitsk and consisting of an iron metallurgy enterprise, a cement plant and a slag processing installation, is considered. Quantitative characteristics of the resource efficiency enhancement, environmental impact minimization and carbon intensity reduction are given. It is concluded that the experience of this industrial symbiosis should be replicated in regions where a significant amount of metallurgical waste is generated (or accumulated), and main raw materials necessary for cement production are available. It is noted that industrial symbioses projects aimed at using metallurgical slags in the production of construction materials and thereby forming circular economy elements meet criteria set for green development projects in the Russian Federation and can be implemented with the support of the state or the banking sector using sustainable financial instruments.
The researches were carried out using D. Mendeleev Center for collective use of scientific equipment, within the framework of the project No. 075-15-2021-688.

Ключевые слова Best available techniques, metallurgical slags, cement, concrete, circular economy, sustainable development projects
Библиографический список

1. Shinkevich M. V., Yakunina R. P., Bashkirtseva S. A. Circular economy – a new paradigm in the management of mesosystems. Vestnik Belgorodskogo universiteta kooperatsii, ekonomiki i prava. 2022. No. 3 (94). pp. 64–72.
2. Korhonen J., Honkasalo A., Seppälä J. Circular economy: The concept and its limitations. Ecological Economics. 2018. Vol. 143. pp. 37–46.
3. Manturov D. V. Sustainable economic growth: aspects of harmonization of industrial and environmental policy in Russia. Nauchno-tekhnicheskie vedomosti SPbGTU. Ekonomicheskie nauki. 2018. Vol. 11. No. 4. pp. 132–140.
4. Skobelev D. O. Ecological industrial policy; main directions and principles of formation in Russia. Vestnik Moskovskogo universiteta. Seriya 6. Ekonomika. 2019. No. 4. pp. 78–94.
5. Skobelev D. O., Fedoseev S. V. The policy of increasing resource efficiency and the formation of a circular economy. Kompetentnost. 2021. No. 3. pp. 5–13.
6. Romanova O. A. Industrial policy as a modern tool for the formation of an environmentally and socially friendly space. Izvestiya UGTU. 2018. Iss. 2 (50). pp. 135–141.
7. Skobelev D. O. Resource efficiency of the economy: aspects of strategic planning. Menedzhment v Rossii i za rubezhom. 2020. No. 4. pp. 3–13.
8. A list of instructions based on the results of the audit of implementation of provisions of the legislation of the Russian Federation on the handling production and consumption waste classified as hazard class III. Pr-1489, item 1b-1 dated 09.16.2020.
9. Order of the Ministry of Industry and Trade of Russia dated 05.05.2014 No. 839 “On Approval of the Strategy for Development of the Ferrous Metallurgy of Russia for 2014–2020 and for the Perspective until 2030 and the Strategy for the Development of the Nonferrous Metallurgy of Russia for 2014–2020 and for the Perspective until 2030”.
10. Decree of the Government of the Russian Federation dated 06.06.2020 No. 1512-r “On approval of the Consolidated Strategy for Development of the Manufacturing Industry of the Russian Federation until 2024 and for the period until 2035”.
11. I. P. Bardin and metallurgical science. Edited by А. G. Shalimova. Moscow : Metallurgizdat, 2003. 129 p.
12. Laskorin B. N., Gromov B. V., Tsygankov A. P., Senin V. N. Waste-free technology in industry. Moscow : Stroyizdat, 1986. 158 p.
13. Yagodin G. A., Tretyakova L. G. Chemistry and chemical technology in solving global problems. Moscow : Khimiya, 1988. 174 p.
14. Rodionov A. I, Klushin V. N, Sister V. G Technological processes of ecological safety. Fundamentals of environmental science. Kaluga : Izdatelstvo N. Bochkarevoy, 2000. 800 p.
15. Zaitsev V. A. Industrial ecology. Moscow : Laboratoriya znaniy, 2012. 512 p.
16. O’Rourke D., Connelly L., Koshland C. Industrial ecology: A critical review. International Journal of Environment and Pollution. 1996. Vol. 6. pp. 89–112.
17. Frosch R. A., Gallopoulos N. E. Strategies for manufacturing. Scientific American. 1989. Vol. 261. pp. 144–152.
18. Adno Yu. L. World ferrous metallurgy: crisis around the turn of a new decade. Chernye Metally. 2020. No. 7. pp. 51–58.
19. Frosch R. A, Clark W. C., Crawford J., Sagar A. et al. The industrial ecology of metals: A reconnaissance. Philosophical Transactions of the Royal Society of London. 1997. Vol. 355 (1728). pp. 1335–1347.
20. Branca T., Colla V., Algermissen D. et al. Reuse and recycling of by-products in the steel sector: Recent achievements paving the way to circular economy and industrial symbiosis in Europe. Metals. 2020. Vol. 10, Iss. 3. 345. DOI: 10.3390/met10030345
21. Ardelean E., Socalici A., Lupu O. et al. Recovery of waste with a high iron content in the context of the circular economy. Materials. 2022. Vol. 15, Iss. 14. 4995. DOI: 10.3390/ma15144995
22. Roginko S. A., Shevelev L. N. The Paris Agreement: New Challenges for Russian Iron & Steel Industry. Chernye Metally. 2019. No. 11. pp. 59–66.
23. Wesseling J., Lechtenböhmer S., Åhman M. et al. The transition of energy intensive processing industries towards deep decarbonization: characteristics and implications for future research. Renewable and Sustainable Energy Reviews. 2017. Vol. 79. pp. 1303–1313.
24. Volosatova A. A., Uchenov A. A., Skobelev D. O. Formation of the concept of implementing the principles of green economy in the Eurasian Economic Union: the role of harmonization of approaches to improving resource efficiency. Vestnik evraziyskoy nauki. 2022. Vol. 14. No. 4. 14. Available at: https://esj.today/23ecvn422.html
25. Naqi A., Jang J. G. Recent progress in green cement technology utilizing low-carbon emission fuels and raw materials: A review. Sustainability. 2019. Vol. 11. 537. DOI: 10.3390/su11020537.
26. Dobrokhotova M. V., Kuroshev I. S., Ezhova O. S. Production of iron and steel. Technology Encyclopedia 2.0: Metal Production. Moscow, SPb. : Renome, 2022. pp. 279–375.
27. Information and technical guide on the best available technologies ITS 25–2021 "Extraction and enrichment of iron ores".
28. Information and technical guide on the best available technologies ITS 26–2022 "Production of iron, steel and ferroalloys".
29. Leontiev L. I., Sheshukov O. Yu., Tsepelev V. S., Mikheenkov M. A., Nekrasov I. V., Egiazaryan D. K. Technological features of processing steel-melting slags into building materials and products. Stroitelnye materialy. 2014. No. 10. pp. 70–73.
30. Smirnov L. A., Sorokin Yu. V. et al. Processing of industrial waste. Ekaterinburg : UIPTs Ltd., 2012. 602 p.
31. Sukharev M. F. Production of heat-insulating materials and products. Moscow : Vysshaya shkola, 1973. 304 pp.
32. Beersaerts G., Hertel T., Lucas S., Pontikes Y. Promoting the use of Fe-rich slag in construction: development of a hybrid binder for 3D printing. Cement and Concrete Composites. 2023. Vol. 138. 104959. DOI: 10.1016/j.cemconcomp.2023.104959
33. Pai-Haung Sh., Zong-Zheng Wu, Hung-Lung Ch. Characteristics of bricks made from waste steel slag. Waste Management. 2004. Vol. 24, Iss. 10. pp. 1043–1047.
34. Wenxing Sh., Zhiwei P., Yawen H. et al. Production of glass-ceramics from metallurgical slags. Journal of Cleaner Production. 2021. Vol. 317. 128220. DOI: 10.1016/j.jclepro.2021.128220
35. Beall G. H. Milestones in glass-ceramics: a personal perspective. International Journal of Applied Glass Science. 2014. Vol. 5. pp. 93–103.
36. Information and technical guide on the best available technologies ITS 6–2022 "Cement production". Available at: http://burondt.ru/NDT/NDTDocsDetail.php?UrlId=1843&etkstructure_id=1872 (accessed: 06.03.2023).
37. Mishra U. C., Sarsaiya S., Gupta A. A systematic review on the impact of cement industries on the natural environment. Environmental Science and Pollution Research. 2022. Vol. 29. pp. 18440–18451.
38. Tikhonova I., Guseva T., Shchelchkov K., Potapova E., Averochkin E. Best available techniques, general binding rules and decarbonisation of the construction materials industry. Proceedings of the 21st International Multidisciplinary Scientific GeoConference SGEM 2021. 2021. Iss. 5.1. pp. 51–58. DOI: 10.5593/sgem2021/5.1/s20.007
39. Potapova E. N., Guseva T. V., Tikhonova I. O. et al. Cement production: aspects of increasing resource efficiency and reducing the negative impact on the environment. Stroitelnye materialy. 2020. Vol. 784. No. 9. pp. 15–20.
40. Decree of the Government of the Russian Federation dated 09.21. 2021 No. 1587 “On Approval of criteria for sustainable (including green) development projects in the Russian Federation and requirements for the system for verification of sustainable (including green) development projects in the Russian Federation”.
41. Dobrokhotova M. V., Matushansky A. V. Application of the concept of the best available technologies for the technological transformation of industry in the conditions of energy transition. Ekonomika ustoychivogo razvitiya. 2022. No. 2 (50). pp. 63–68.

Language of full-text русский
Полный текст статьи Получить
Назад