Журналы →  CIS Iron and Steel Review →  2023 →  №2 →  Назад

Coating application and Corrosion protection
Название Study of electrochemical properties of austenitic chromium-nickel steel 12Kh18N10T in concentrated sulfuric acid
DOI 10.17580/cisisr.2023.02.18
Автор S. E. Zolotukhin, A. Yu. Kurbatov, V. N. Grunskiy, Yu. M. Averina
Информация об авторе

 D. Mendeleev University of Chemical Technology of Russia (Moscow, Russia)

S. E. Zolotukhin, Cand. Eng., Associate Prof., Dept. of General Chemical Technology, e-mail: zolotukhin.s.e@muctr.ru
A. Yu. Kurbatov, Cand. Eng., Associate Prof., Dept. of Innovative Materials and Corrosion Protection
V. N. Grunskiy, Dr. Eng., Prof., Dept. of General Chemical Technology
Yu. M. Averina, Cand. Eng., Associate Prof., Dept. of Innovative Materials and Corrosion Protection


Considerable attention has always been paid to the issues of protection against chemical corrosion of technological equipment operating in aggressive environments, and even now this issue does not lose its relevance. Recovery of absorption heat is an integral part of the process of minimizing energy costs, and that is why special requirements are imposed on the quality and service life of heat exchange units. Within the framework of the work done, the electrochemical behavior of austenitic nickel-containing steel grade 12Kh18N10T (equivalent of AISI 304), used for the manufacture of process equipment for sulfuric acid production processes by the double contact - double absorption method, was studied. For the studied sample of austenitic nickel-containing steel, anodic potentiodynamic polarization curves were obtained, on which two weakly manifested passivation regions were noted. It has been established that the predominant contribution to metal losses is made by chemical corrosion, while during the operation of steel structures, iron is leached from the surface layer with formation of a protective nanofilm. Thickness of the resulting protective film is 35 nm or more, with the exposure time of steel in hot sulfuric acid for 200 hours. Increasing of the exposure time does not significantly affect the thickness or composition of the protective coating. Using X-ray phase analysis, it was established that the protective film is based on nickel and chromium compounds. The corrosion rate of equipment in the presence of a protective film does not exceed 0.1 mm/year, there are no pitting and intergranular corrosion. The data obtained will allow not only predicting and planning repair and maintenance work, but also organizing a corrosion prevention system without introducing additional reagents into the system.

Ключевые слова Chemical corrosion, sulfuric acid production, austenitic nickel steel, protective film, hot absorption, passivation, polarization curves
Библиографический список

1. Maltseva G. N. Corrosion and equipment anti-corrosion protection. A manual. Penza. Izdatelstvo Penzenskogo gosudarstvennogo universiteta. 2000. 55 p.
2. Kozlova L. S., Sibileva S. V., Chesnokov D. V., Kutyrev A. E. Corrosion inhibitors. Aviatsionnye materialy i tekhnologii. 2015. No. 2 (35). pp. 67-75.
3. Ryabicheva L. A., Zasko V. V. Corrosion and materials protection. Moscow, Vologda: Infra-Inzheneriya. 2023. 160 p.
4. Kablov E. N., Startsev O. V., Medvedev I. M. Review of foreign experience on corrosion and corrosion protection remedies. Aviatsionnye materialy i tekhnologii. 2015. No. 2 (35). pp. 76-87.
5. Singh H., Kumar S., Kumar R. Overview of corrosion and its control: a critical review. Proceedings on Engg. Sciences. 2021. Vol. 3 (1). pp. 13-24.
6. Akhtar Javed. A Review on Corrosion Protection of Iron and Steel. Recent Patents on Corrosion Science. 2013. Vol. 3 (2). pp. 79-147. DOI: 10.2174/22106839113036660008
7. Qian Y., Li Y., Jungwirth S., Seely N., Fang Y., Shi X. The application of anti-corrosion coating for preserving the value of equipment asset in chloride-laden environments: a review. Int. J. Electrochem. Sci. 2015. No. 10. pp. 10756-10780.
8. Minko N. I., Lazareva E. A. Protection of Nichrome-Alloy Articles from High-Temperature Corrosion. Glass and Ceramics. 2018. Vol. 75. pp. 226-229. DOI: 10.1007/s10717-018-0060-3
9. Sundar G., Hynes N. R. J. Corrosion issues in metal matrix composites & Bi-metals. Advances in basic science (ICABS 2019). 2019. DOI: 10.1063/1.5122399
10. Yang H.-M. Role of Organic and Eco-Friendly Inhibitors on the Corrosion Mitigation of Steel in Acidic Environments—A State-of-Art Review. Molecules. 2021. No. 26 (11). p. 3473. DOI: 10.3390/molecules26113473
11. Saji V. S. A Review on Recent Patents in Corrosion Inhibitors. Recent Pat. Corros. Sci. 2010. No. 2. pp. 6-12.
12. Kurbatov А., Kuzin E., Vetrova M., Sitnikov I., Sitnikov A. Technology of non-reagent water treatment of natural fresh waters for the technological needs of metallurgical enterprises. Conference proceedings METAL 2021 30th International Conference on Metallurgy and Materials. Ostrava: TANGER Ltd. 2021. pp. 127-132. DOI: 10.37904/metal.2021.4077
13. Kuzin E. N., Averina Yu. M., Kurbatov A. Yu., Sakharov P. A. Technology of non-reagent deferrization of artesian water for the needs of recycling water supply of metallurgical enterprises. Chernye metally. 2020. No. 10. pp. 66-71.
14. Novoselova E. A., Ivakhnyuk G. K. Selection of Fe-based corrosion-resistant steels and alloys for prevention of extremal situations caused by corrosion of oil pipelines. Tekhnosfernaya bezopasnost. 2021. No. 2 (31). pp. 11-20.
15. Chausov F. F. Efficient method of corrosion protection for steel equipment in engineering nets. Ekologiya i promyshlennost Rossii. 2009. No. 2. pp. 8-12.
16. Bolotova Yu. V., Ruchkinova O. I. Corrosion of heat exchanging equipment in petrochemical production facilities. Vestnik Permskogo natsionalnogo issledovatelskogo politekhnicheskogo universiteta. Mashinostroenie, metallovedenie. 2015. Vol. 17. No. 4. pp. 102-119.
17. Corrosion and protection of chemical equipment. A reference book. Vol. 4. Production of sulfuric acid and phosphorus fertilizers. Edited by Sukhotin A. M. and Zotikov V. S. Leningrad: Khimiya. 1970. 272 p.
18. Liu J., Alfantazi A., Asselin E. A new method to improve the corrosion resistance of titanium for hydrometallurgical applications. Applied Surface Science. 2015. No. 332. pp. 480-487. DOI: 10.1016/j.apsusc.2015.01.140
19. Krasnaya E. G., Tarantseva K. R., Firsova O. V. Estimation of ecological damage caused by corrosion destruction of equipment. Molodezh. Nauka. Innovatsii. Proceedings of the XI International scientific and practical conference. Penza. Penzenskaya gosudarstvennaya tekhnicheskaya akademiya. 2015. 4 p.
20. Amelon A. G., Semenov G. M., Zolotukhin S. E. et al. The method of sulfuric acid fabrication from hydrogen sulfide. USSR Autorship certificate No. 119800 dated 15.12.1985.
21. Vera-Kastaneda E. Absorption heat extraction from sulfur trioxide. US Patent No. 0002672113 dated 12.11.2018.
22. Abrashov A., Grigoryan N., Vagramyan T., Asnis N. On the Mechanism of Formation of Conversion Titanium-Containing Coatings. Coatings. 2020. Vol. 10. No. 4 (328). рp. 1-11. DOI: 10.3390/coatings10040328
23. Kuzin E. N., Kruchinina N. E., Fadeev A. B., Nosova T. I. Principles of pyro-hydrometallurgical processing of quartz-leucoxene concentrate with the formation of a pseudobrukite phase. Obogashchenie rud. 2021. No. 3. рp. 33-38.
24. Bazyleva O. A., Arginbaeva E. G., Lutskaya S. A. The methods for increase of corrosion resistance of high-temperature nickel alloys. Trudy VIAM. 2018. No. 4 (64). рp. 3-8.
25. Abrashov A. A., Grigoryan N.S., Vagramyan T. A., Zhukov A. F., Zhukov A. P. Development of a Process for Applying Cerium-Containing Protective Coatings to Alloy Steel. Protection of Metals and Physical Chemistry of Surfaces. 2020. Vol. 56. No.7. pp. 1311–1314. DOI: 10.1134/S2070205120070023
26. Li Y., Ives M., Coley K., Rodda J. Corrosion of nickel-containing stainless steel in concentrated sulphuric acid. Corrosion Science. 2004. No. 46 (8). рp. 1969–1979. DOI: 10.1016/j.corsci.2003.10.017
27. Jones S. A., Coley K. S., Kish J. R., Hoyt J. J. Corrosion of Nickel-Containing Stainless-Steel in Concentrated Sulfuric Acid: Potential Oscillations Predicted by Combination of Kinetic Phenomena. Journal of the Electrochemical Society. 2013. No. 160 (8). рp. 326-335. DOI: 10.1149/2.027308jes
28. Savitskiy E. M., Arskaya E. P., Lazarev E. M. et al. Corrosion resistance of materials in boiling sulfuring acid and its decomposition. Zashchita materialov. 1981. Vol. XVII. No. 13. рp. 290-294.
29. Nefedov V. I. X-ray electron spectroscopy of chemical compounds. A Reference book. Moscow: Khimiya. 1984. 255 p.
30. Volkov G. M., Zuev V. M. Material science. Moscow: Akademiya. 2008. p. 149.

Полный текст статьи Study of electrochemical properties of austenitic chromium-nickel steel 12Kh18N10T in concentrated sulfuric acid