Журналы →  Non-ferrous Metals →  2024 →  №1 →  Назад

BENEFICATION
Название Investigation of oxide films removal process from the ore pulp particle surface during its ultrasonic treatment
DOI 10.17580/nfm.2024.01.02
Автор Iodis V. A., Koydan I. A.
Информация об авторе

Scientific Research Geotechnological Center, Far Eastern Branch of Russian Academy of Sciences, Petropavlovsk-Kamchatsky, Russia

V. A. Iodis, Candidate of Technical Sciences, Leading Researcher, e-mail: iodisva@mail.ru
I. A. Koydan, Researcher, e-mail: koydan91@mail.ru

Реферат

This work was carried out with the aim of experimentally determining the parameters of the ultrasonic treatment process in which oxide films will be removed from the surface of sulfide particles —pyrrhotite, pentlandite, pyrite, etc. in the pulp. Analysis of literature sources and previous studies has shown that there is a lack of experimental data to determine the parameters of ultrasonic treatment process, which would provide the removal of oxide film from ore pulp particle surface. The studies were carried out on a mounted reactor, which is a sealed ore pulp reactor with an ultrasonic vibration concentrator and a working tool (emitter) immersed in it. Water cooling was provided on the outside of the reactor. The experiments were carried out at an ultrasonic vibration frequency of 22 kHz ± 1.65, intensities of 7.2, 11, 21 and 28 W/cm2, for 15 minutes. The maximum power consumption by the generator was 400 W, acoustic power — 200 W, radiation power — 120 W, with a power control range of 30–100%. The work used samples of sulfide ores from the Shanuch copper-nickel deposit (Kamchatka Krai), subjected to crushing, grinding to 100% control class –0.1 mm and classification on a sieve screen. As shown by studies of ultrasonic exposure on a mounted laboratory reactor using an ultrasonic technological apparatus of the “Volna” type, model UZTA-0.4/22-OM, and microscopic studies using an ore polarizing microscope POLAM R-312, the parameters of the ultrasonic exposure process, in which oxide films will be removed from the surface of the ore particles of the pulp; with minimal grinding of the ore particles, radiation intensity is 21 W/cm2, the process duration is from 15 minutes, the reduction in the control class –0.1 mm was 12.2%.

Ключевые слова Ultrasonic treatment, ore pulp, laboratory installation, ultrasonic technological apparatus, oxide films, mechanical activation
Библиографический список

1. Iodis V. A., Trukhin Yu. P. Development of a Large Flow Cascade Bacterial-Chemical Reactor with Ultrasonic Activation for Bacterial-Chemical Processing of Cobalt-Copper-Nickel Ore. Mining Informational and Analytical Bulletin. 2021. No. 11/S19. pp. 136–146.
2. Blayda I. A., Vasyleva T. V., Semenov K. I. Impact of Ultrasound on Coal Desulfurization and Process of Bioleaching of Metals. Microbiology & Biotechnology. 2017. Iss. 4. pp. 6–20.
3. Averina Yu. M., Moiseeva N. A., Nyrkov N. P., Shuvalov D. A., Kurbatov A. Yu. Properties and Effects of Cavitation. Uspekhi v Khimii i Khimicheskoy Tekhnologii. 2018. Vol. XXXII, Iss. 14. pp. 37–39.
4. Agranat B. A., Dubrovin M. N., Khavsky N. N., Eskin G. I. Fundamentals of Physics and Technology of Ultrasound. Moscow: Vysshaya Skhola, 1987. 352 p.
5. Chernykh S. I., Rybakova O. I., Lebedev N. M., Zhirnova T. I. On the Issue of Studying the Effect of Ultrasound, Magnetic Fields and Electric Current on Gold Flotation. Tsvetnaya Metallurgiya. 2003. Iss. 6. pp. 15–21.
6. Zarembo L. K. Acoustic Currents. In: Physics and technology of powerful ultrasound. Vol. 2. Powerful ultrasonic fields (Ed. by L. D. Rosenberg). Moscow: Nauka, 1968. 267 p.
7. Glembotsky V. A., Sokolov M. A., Yakubovich I. A., Bayshulakov A. A., Kirillov O. D., Kolchemanova A. E. Ultrasound in mineral processing. Alma-Ata: Nauka, 1972. 229 p.
8. Smirnov I. V., Mikhailova N. B., Yakupov B. A., Volkov G. A. An Analysis of the Threshold Parameters of Acoustic Cavitation Inception in a Liquid Depending on Frequency of an Ultrasonic Field, Hydrostatic Pressure and Temperature. Technical Physics. 2021. Vol. 91, Iss. 11. pp. 1631–1640.
9. Podkamenny I. А., Kadyrbekova E. А. Theory and Practice of the Application of Ultrasonic Influences in the Processes of Concentration of Ore and Non-Metallic Raw Materials. Problems of Mineralogy, Petrography and Metallogeny. Scientific Readings in Memory of P.N. Chirvinsky. 2021. Vol. 24. pp. 172–179.
10. Groo E. A., Algebraistova N. K., Zhizhaev A. M., Romanchenko A. S., Makshanin A. V. The Research is on the Effect of an Ultra-Sound Treatment for Intensification the Processes of Extracting Gold from Refractory Materials. Mining Informational and Analytical Bulletin. 2012. No. 2. pp. 89–96.
11. Kienko L. A., Samatova L. A., Voronova O. V. Ultrasonication for Pulp and its Influence on Flotation Selectivity
When Dressing the Carbonate-Fluorite Ores. Mining Informational and Analytical Bulletin. 2013. No. S4. pp. 172–179.
12. Aleksandrova T. N., Litvinova N. M., Rasskazova A. V., Bogomyakov R. V. Influence of Ultrasonic Treatment to Technological Parameters of Carbon-Containing Material Floatation. Mining Informational and Analytical Bulletin. 2015. No. S1-4. pp. 196–201.
13. Chanturia V. A., Minenko V. G., Samusev A. L., Chanturia E. L., Koporulina E. V. The Mechanism of Influence Exerted by Integrated Energy Impacts on Intensified Leaching of Zirconium and Rare Earth Elements from Eudialyte Concentrate. Journal of Mining Sciences. 2017. Iss. 5. pp. 105–112.
14. Chanturia V. A., Minenko V. G., Samusev A. L., Ryazantseva M. V., Chanturia E. L., Koporulina E. V. Influence Exerted by Ultrasound Processing on Efficiency of Leaching, Structural, Chemical, and Morphological Properties of Mineral Components in Eudialyte Concentrate. Journal of Mining Science. 2018. Vol. 54, Iss. 2. pp. 285–291.
15. Hu Y., Guo P., Wang S., Zhang L. Leaching Kinetics of Antimony from Refractory Gold Ore in Alkaline Sodium Sulfide under Ultrasound. Chemical Engineering Research and Design. 2020. Vol.164. pp. 219–229.
16. Lu J., Wang N., Yuan Z., Zhang Q., Li L., Wang Z. The Effects of Ultrasonic Wave on Heterogeneous Coagulation and Flotation Separation of Pentlandite-Serpentine. Minerals Engineering. 2022. Vol. 188. 107828.
17. Pan W., Yi R., Liao Z., Yang L. Experimental Study on Microbial Desulphurization of Sulfide Ores and Self-Heating Simulation of Ore Heaps Under Ultrasonic and Microwave. Process Safety and Environmental Protection. 2022. Vol. 164. pp. 435–448.
18. Li H., Li S., Peng J., Srinivasakannan C., Zhang L., Yin S. Ultrasound Augmented Leaching of Nickel Sulfate in Sulfuric Acid and Hydrogen Peroxide Media. Ultrasonics-Sonochemistry. 2018. Vol. 40, Pt. A. pp. 1021–1030.
19. Iodis V. A. Calculation of Optimal Intensity of Ultrasonic Vibrations for Removal of Oxide Films from the Surface of Ore Pulp Particles. Non-ferrous Metals. No. 2. 2023. pp. 10–13.
20. Iodis V. A. Lab-Scale Reactor for Ultrasonic Treatment of Cobalt–Copper–Nickel Ore Pulp. Gornyi Zhurnal. No. 12. 2023. pp. 81–87.
21. Khmelev V. N., Tsyganok S. N., Barsukov R. V., Khmelev M. V. Ultrasonic Devices for Process Intensification. Proceedings of the All-Russian Acoustic Conference: Proceedings of the III All-Russian Conference. 2020. pp. 191–194.
22. Khmelev V. N., Barsukov R. V., Barsukov A. R., Tsyganok S. N., Nesterov V. A. Ultrasonic Technological Apparatus with Five Working Tools of Different Diameters for Scientific Research. South-Siberian Scientific Bulletin. 2022. Iss. 4. pp. 106–109.

Полный текст статьи Investigation of oxide films removal process from the ore pulp particle surface during its ultrasonic treatment
Назад