• Покупка статей
  • Telegram_OreMet
Скрыть↑
Журналы →  Chernye Metally →  2011 →  №2 →  Назад

Ironmaking and steelmaking
Название DC-EAF power control using a sound based foaming slag signal
Автор T. Jansen, K. Krüger, H. Schliephake, B. Dettmer, Jianxiong Deng.
Информация об авторе Eng. T. Jansen, Scientific fellow; Prof., Dr. Eng. K. Krüger, Chair of processing of technological information and system analysis, Institute of Automation of Hannover University named after Helmut Schmidt (Bundeswehr University), Hamburg; Dr. Eng. H. Schliephake, Technical director; Eng. B. Dettmer, Managing board of electric steelmaking shop, Dr. Eng. Jianxiong Deng, Technological department, Georgsmarienhütte GmbH, Georgsmarienhütte; klaus.krueger@hsu-hh.de
Реферат
Based on the acoustic sound emission and the electrical parameters, an algorithm for foaming slag detection at a DC-EAF is presented. Regardless of the currently applied electrical power, the model provides a reliable estimate of the slag level. Empirical studies at the DC-EAF of the Georgsmarienh tte GmbH demonstrate the applicability of the signal as a slag index. Thus a robust tool is given to detect a poorly shielded arc at an early stage. In a second step the slag signal was integrated into an existing power control concept. Aim is to adjust power input dynamically to the process conditions.
Ключевые слова Electric arc furnaces, steel making, electric power, foaming slag, detection, control, slag signal.
Библиографический список

1. Bowman, B.; Krüger, K.: Electric Arc Furnace Physics, Verlag Stahleisen, Düsseldorf, 2009.
2. Krüger, K.; Ehrbar, A.; Timm, K.: stahl u. eisen 118 (1998) Nr. 9, S. 63/67.
3. Knoop, M.; Lichterbeck, R.; Köhle, S.; Siig, J.: stahl u. eisen 117 (1997) Nr. 2, S. 91/94.
4. Treppschuh, A.: Regelung der elektrischen Leistung eines Gleichstromlichtbogenofens, Univ. der Bun des wehr Hamburg, 2008 (Dr.-Ing.-Diss.); VDI-Fortschrittsbericht, Reihe 8, Nr. 1144, VDI-Verlag, Düsseldorf, 2008.
5. Krüger, K.; Timm, K.; Schliephake, H.; Bandusch, L.: stahl u. eisen 116 (1996) Nr. 8, S. 95/100.
6. Malmberg, D.: AC furnace — use of radio wave technique (Mefos), Technical steel research report EUR 19470, 2001, S. 71/91.
7. Sedivy, C.; Krump, R.: Arch. Met. Mat. 53 (2008) Nr. 2, S. 405/09.
8. Dittmer, B.; Krüger, K.; Rieger, D.; Leadbetter, S.; Matschullat, T.; Döbbeler, A.: stahl u. eisen 129 (2009) Nr. 12, S. 33/41.
9. Nyssen, P.; Mathy, C.: Rev. de Mét. 103 (2006) Nr. 9, S. 369/73.
10. Lemke, J.: Steuerung der Schaum schlackenfahrweise beim kontinuierlichen Einschmelzen von Eisenschwamm in einem Drehstromlichtbogenofen mit Hilfe der Lichtbogenschallemission, Technische Hochschule Aachen, 1994 (Dr.-Ing.-Diss.).
11. Krüger, K.; Homeyer, K.; Bandusch, L.: stahl u. eisen 124 (2004) Nr. 9, S. 51/57.
12. Marique, C.; Nyssen, P.: DC furnace — use of sonic meter and accelerometer techniques, Technical steel research report EUR 19470, 2001, S. 45/71.
Language of full-text русский
Полный текст статьи Получить
Назад