• Покупка статей
  • Telegram_OreMet
Скрыть↑
Журналы →  Chernye Metally →  2011 →  №10 →  Назад

Iron and Steel Making
Название New technology for the recovery of chromium from EAF stainless steelmaking slag
Автор G. Stubbe, G. Harp, D. Schmidt, M. Sedlmeier
Информация об авторе Eng. G. Stubbe, Researcher, Department of Chemical Technology and Metallurgy; Dr.-Nat. G. Harp, Head of Department, VDEh Institute of Applied Research GmbH, Dusseldorf; D. Schmidt, Head of the Production of Steelmaking Shop, Siegen-Eintracht Work; Eng. M. Sedlmeier Head of metallurgical and forging, Siegen-Eintracht Work, BGH Edelstahl Siegen GmbH, Siegen, Germany; gerald.stubbe@bfi.de
Реферат

During the production of stainless steel in an electric arc furnace a significant part of the charged chromium is transferred to the slag. With the new technology of aluminium injection, chromium is recovered from the slag, thus alloying components and costs are saved. Typical mechanically processed Al granules used for the EAF slag injection (grain size: approx. 1–2 mm) are displayed. Due to the exothermic reduction reaction a release of heat is additionally achieved leading to a decreased specific consumption of electric energy and increased productivity. The new process was tested successfully under operational conditions at BGH Edelstahl Siegen GmbH in collaboration with  VDEh-Betriebsforschungsinstitut GmbH, and afterwards profitably realized by BGH as a standard procedure at its running EAF. Results of operational trials undertaken at mobile BFI injection device are presented with regard to the average chromium oxide mass fraction of the final EAF slag and the associated chromium yield (ferritic and austenitic steels). Energy balance for these steels is compared for normal operational practice and aluminium injection. Typical process diagram for the stainless steel production at BGH including the new implemented aluminium injection has been constructed. Development of stainless steel production in Europe from 1996 to 2006 is analyzed and chemical composition of the different stainless steel groups is shown.
Ключевые слова Electric arc furnaces, steelmaling slag, stainless steels, chromium oxide, aluminium injection, energy balance, recovery, chemical composition.
Библиографический список

1. World Stainless Steel Statistics 2007 Edition, Vale Inco Ltd., Toronto, Kanada, Dez. 2007.
2. Heinen, K.-H.: Elektrostahlerzeugung, 4. Aufl., Verlag Stahleisen, Düsseldorf, 1997.
3. Björkvall, J.; Angström, S.; Kallin, L.: Reduction of chromium oxide containing slags using CaC2 injection, Internat. Conf. on Molten Slags, Fluxes and Salts VII, Kapstadt, Südafrika, 25.–28. Jan. 2004, S. 663/70.
4. Mudersbach, D. W.: Verbesserung der Eigenschaften von Elektroofenschlacken aus der Herstellung von nichtrostenden Stählen zur Nutzung dieser Schlacken im Verkehrsbau, FehS Inst. f. Baustoff-Forschung, Duisburg, Bd. 11, 2004.
5. Best Available Techniques Reference Document on the Production of Iron and Steel, Umweltbundesamt (German Federal Environmental Agency), Berlin, Dez. 2001.
6. Rohstoffwirtschaftliche Steckbriefe für Metall- und Nichtmetallrohstoffe, Bundesanstalt für Geowissenschaften und Rohstoffe, Hannover, Stand 01/2007.
7. Böttcher, G.; Bleck, W.; Dahl, W.; El Gammal, T.; Gudenau, H. W.; Senk, D.: Einblasen von Feststoffen und Durchmischen von Schmelzen mit einem kohärenten Gasstrahl, RWTH Aachen, 1982; Shaker Verlag, Aachen, Bd. 6/2005 (Dr.-Ing.-Diss.).
8. Wagner, C.; Antrekowitsch, H.; Schnideritsch, H.: stahl u. eisen 130 (2010) Nr. 1, S. 39/45.
9. Berechnet durch FactSage Software, Thermfact and GTT-Technologies. 10. Sedlmeier, M.; Schmidt, D.; Vamvakas, K.; Iacuzzi, M.: stahl u. eisen 130 (2010) Nr. 1, S. 63/69.
Language of full-text русский
Полный текст статьи Получить
Назад