NANOMATERIALS AND NANOTECHNOLOGY | |
Название | Study of Titanium Oxide Nanoporous and Nanotubular Layer Formation Using Electrochemical Impedance Spectroscopy |
Автор | L. A. Balagurov, M. A. Agafonova, E. A. Petrova, A. I. Yakovenko |
Информация об авторе | Giredmet L. A. Balagurov E. A. Petrova
Moscow State University M. A. Agafonova A. I. Yakovenko |
Реферат | Nanoporous and nanotubular titanium oxide layers were fabricated by electrochemical etching in a mixed organic–inorganic electrolyte. The process of layers formation was investigated in−situ using the electrochemical impedance spectroscopy method. The experimental data show that, except for an initial stage of electrolytic etching, the impedance of a porous titanium oxide layer during almost the entire process is determined by the impedance of a small contact area of electrolyte/titanium oxide at the bottom of the nanoporous and nanotubular layers. The observed higher resistances of space charge region in the titanium oxide layer in comparison with the resistance of charge transfer at the electrolyte/TiOx boundary testify that the growth rate of porous and nanotubular layers is limited by the diffusion of titanium and oxygen ions through the oxide layer, and not by the diffusion of ions in the electrolyte. |
Ключевые слова | Titanium oxide, nanoporous, nanotubular, impedance, electrolyte, etching, conductivity, electron microscopy |
Библиографический список | 1. Mor, G. K. Use of highly−ordered TiO2 nanotube arrays in dye−sensitized solar cells / G. K. Mor, K. Shankar, M. Paulose, O. K. Varghese, C. A. Grimes // Nano Lett. − 2006. − V. 6, N 2. − P. 215—218. 2. Chu, S. Z. Highly porous (TiO2—SiO2—TeO2)/Al2O3/TiO2 composite nanostructures on glass with enhanced photocatalysis fabricated by anodization and sol−gel process / S. Z. Chu, S. Inoue, K. Wada, D. Li, H. Haneda, S. Awatsu // J. Phys. Chem. B. − 2003. − V. 107, N 27. − P. 6586—6589. |
Language of full-text | русский |
Полный текст статьи | Получить |