Journals →  Chernye Metally →  2013 →  #11

Chernye Metally



The 11th issue of "Chernye Metally" journal (2013) is opened, as usual, by metallurgical news "Steel industry of the world". The section "Development of metallurgy in Russia and CIS countries" includes now five articles.


The specialists from Magnitogorsk State Technical University (V.G. Druzhkov, A.V. Ivanov et al.) presented the paper "Choice of bell-less top for blast furnaces", generalizing information about advantages and disadvantages of bell-less tops of trough and rotary types, based on publications and experimental data. It was established that maximal separating effect of gas flow on charging materials has been noted for the bell top, then bell-less top of rotary type and bell-less tops of trough type occupy second and third places meaning the value of separating effect.


Improvement of soft reduction technology in metal continuous casting for slabs is observed in the article "Correction of soft reduction technology in the process of metal casting in the slab continuous caster" by V. V. Moshkunov and his colleagues from Magnitogorsk Iron and Steel Works. This paper describes investigations using the effect of "artificial swelling" of a slab billet, undertaken for checking correspondence of information about actual length of liquid metal cup calculated by computer via dynamical system of billet secondary cooling.


The same section includes the third final part of the paper "Dendritic micro-heterogeneity of cast steel: review of the problems and their computer-aided analysis" by V. M. Golod, K. I. Emelyanov, I. G. Orlova from St. Petersburg State Technical University. Usinga Monte Carlosimulation it was implemented the solution of formation of anarray of data, accordingtothe final distribution of secondary dendrite arm spacing based on local system for the coalescence of neighboring secondary branches.


Publication "FEM simulation and optimization of the new reduction method for continuously cast billet" by A. A. Bogatov et al. from the Ural State Federal University observes investigations undertaken at the three-high mill of screw rolling for reduction of the billets that was installed at TPA-80 tube rolling unit of Sinarsky Pipe Plant (incorporated in TMK - Tube Metallurgical Company). The article examines the reasons for formation of tube buckles in rolling, formulates and solves the problems of mathematical simulation in Deform-3D program of screw rolling and piercing processes.


G. V. Shimov, S. P. Burkin and their colleagues from Ekaterinburg and Pervouralsk have examined necessity of elimination of roll straightening process from tube making technology and proposes combining of heat treatment and straightening of the heat exchanger pipes. The method of heat treatment and extension straightening of heat exchanger pipes is proposed and tested in production environment for tubes with size 16x1.5 mm made of stainless steel 08Kh18N10T (08Х18Н10Т).


Translated section of this issue consists mainly of the papers in the section "Coke-chemical production". L. Nelles and H.-B. Beckmann from the company Hüttenwerke Krupp Mannesmann GmbH have analyzed the tendencies, problems and transformations of this industry since 1900-ies based on the German experience. P. Schmöle and M. Peters from ThyssenKruppSteel Europe in their article have examined the coke quality required for providing the preset productivity of a blast furnace.


The issue also includes the sections "Industrial Safety and Labour protection", "Metallurgy and Automotive Industry", "Education and Training of Specialists". The last section contains two publications devoted to the forthcoming 250th anniversary of Technical University Freiberg.

 

The final publication in the issue is devoted to the interesting facts about Bessemer converter technology and is connected with the 200th anniversary of Henry Bessemer.

 

You can find more details about this issue below or by ordering the printed or electronic version of the journal.


ArticleName Steel industry of the world
Development of metallurgy in Russia and CIS
ArticleName Choice of bell-less top for blast furnaces
ArticleAuthors V. G. Druzhkov, A. V. Ivanov, I. E. Prokhorov, N. A. Maistrenko, A. S. Kharchenko
ArticleAuthorsData

Chair of Iron and Steel Metallurgy, Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

Druzhkov V. G., Cand. Eng., Assist. Prof.
Ivanov A. V., Cand. Eng., Assist. Prof.
Prokhorov I. E., Cand. Eng., Assist. Prof.
Maistrenko N. A., Post-Graduate
Kharchenko A. S., Post-Graduate

E-mail (common): as.mgtu@mail.ru

ArticleName Correction of soft reduction technology in the process of metal casting in the slab continuous caster
ArticleAuthors V. V. Moshkunov, S. V. Prokhorov, A. S. Kazakov, D. V. Rabadzhi, S. V. Didovich, A. M. Stolyarov
ArticleAuthorsData

Magnitogorsk Iron & Steel Works (Magnitogorsk, Russia):

Moshkunov V. V., Cand. Eng., Engineer Technologist, E-mail: Moshkunov.vv@mmk.ru
Prokhorov S. V., Chief Metallurgist
Kazakov A. S., Leading Specialist
Rabadzhi D. V., Head of Basic Oxygen Shop

 

Chair of Iron and Steel Metallurgy, Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

Didovich S. V., Post-Graduate
Stolyarov A. M., Dr. Eng., Prof.

ArticleName Dendritic micro-heterogeneity of cast steel: review of the problems and their computer-aided analysis (Part 3)
ArticleAuthors V. M. Golod, K. I. Emelyanov, I. G. Orlova.
ArticleAuthorsData

Chair of Physics and Chemistry of Cast Alloys and Processes, Saint-Petersburg State PolytechnicaL University (Saint-Petersburg, Russia):

Golod V. M., Cand. Eng., Prof.
Emelyanov K. I., Post-graduate
Orlova I. G., Post-graduate

E-mail (common): cheshire@front.ru

ArticleName FEM simulation and optimization of the new reduction method for continuously cast billet
ArticleAuthors A. A. Bogatov, D. A. Pavlov, D. V. Ovchinnikov, S. V. Lipnyagov, D. Sh. Nukhov
ArticleAuthorsData

Chair of Metal Forming, Ural State Federal University (Ekaterinburg, Russia):

Bogatov A. A., Dr. Eng., Prof., Head of the Chair
Pavlov D. A., Post-Graduate of the Chair, E-mail: pavlovda1989@mail.ru
Nukhov D. Sh., Post-Graduate of the Chair

 

Sinarsky Pipe Plant (Kamensk-Uralsky, Russia):

Ovchinnikov D. V., Cand. Eng., Chief Engineer
Lipnyagov S. V., Chief Rollerman

ArticleName The method of heat treatment and straightening of tubes for steam generating units of nuclear power stations
ArticleAuthors G. V. Shimov, +S. P. Burkin, An. V. Serebryakov, Al. V. Serebryakov, R. F. Iskhakov
ArticleAuthorsData

Chair of Metal Forming, Ural State Federal University (Ekaterinburg, Russia):

Shimov G. V., Post-Graduate of the Chair, geosh@bk.ru
+Burkin S. P., Cand. Eng., Prof.

 

Pervouralsk New Pipe Plant (Pervouralsk, Russia):

Serebraykov An. V., Cand. Eng., Head of Scientifi c Research Dept., Scientifi c Engineering Center

 

“Novye tekhnologii trub” (“New tube technologies”) LLC (Pervouralsk, Russia):

Serebryakov Al. V., Cand. Eng., Director

 

“Mashprom” Scientifi c and Production Enterprise (Ekaterinburg, Russia):

Iskhakov R. F., Cand. Eng., Director on New Technology

ArticleName MIEL company: advices about royalty
ArticleName Air Liquide company: the global leader in production of gases for industry, health care and environment protection
Iron and Steel Making
ArticleName The coke plant: from “necessary evil” to part of a modern steelworks
ArticleAuthors L. Nelles, H.-B. Beckmann.
ArticleAuthorsData

Hüttenwerke Krupp Mannesmann GmbH (Duisburg, Germany):

Nelles L., Dr. Eng., Head of Coke Dept., E-mail: leo.nelles@hkm.de
Beckmann H.-B., Mag. Eng., Head of Coke Production Unit

ArticleName Coke quality and blast furnace performance
ArticleAuthors P. Schmole, M. Peters
ArticleAuthorsData

ThyssenKrupp Steel Europe AG (Duisburg, Germany):

Schmöle P., Dr. Eng., Prof., Vice President, Competence Center Metallurgy, E-mail: p.schmoele@thyssenkrupp.com
Peters M., Dr. Eng., Sr. Vice President, Hot Metal Production

Industrial Safety and labour Protection
ArticleName Increase of labour duration
Metallurgy and automotive industry
ArticleName R. Muller-Wondorf. Decrease of automobile weight using steel components
Education and training of specialists
ArticleName Forming the ecological consciousness in the system of technical education and personnel training
ArticleAuthors A. Schroder, V. Echterhoff
ArticleName Technical University Freiberg for sustainable development
ArticleName Steel production worldwide
Metallurgical history
ArticleName Bessemer steel making production at Heinrichshütte metallurgical works in Hatingen
ArticleAuthor O. Schmidt-Rutsch
Journals →  Chernye Metally →  2013 →  #11