Journals →  Tsvetnye Metally →  2014 →  #6

Tsvetnye Metally


 

The 6-th issue of the journal «Tsvetnye Metally» (Non-ferrous metals) (June 2014) shares the questions of theory and practice of concentration, production and processing of non-ferrous metals, complex use of crude ore, economics and management of production, and automation of metallurgical processes.

 

The article «Amursk hydrometallurgical plant is a key element of processing unit of Far Eastern „Polymetal“ JSC», published in the section «NOBLE METALS AND THEIR ALLOYS», considers the history of creation (2012) and driving up to the project capacity (2013) of the first Russian autoclave processor of refractory gold-containing concentrates – Amursk hydrometallurgical plant (Amursk Mining and Metallurgical Combine). There are discussed the basic advantages of autoclave oxidation of pyrite and arsenopyrite concentrates, containing «invisible» gold in structure, in comparison with other existing methods of processing of the same materials. There are given the basic parameters of work of enterprise and its main production stages.

 

The article by D. V. Ermakov and N. V. Vorobev-Desyatovskiy considers the basic approaches to solving of problems, which appear in the time of exploitation of Russian and CIS gold-mining enterprises, using alkaline cyanide solutions in their practice. There was carried out the comparison of international and Russian requirements to decontamination of cyanide-containing wastes of gold-mining industry.

 

The article by E. E. Maltseva, A. A. Blokhin, M. A. Pleshkov, Yu. V. Murashkin and M. A. Mikhaylenko, published in the section «MAGNESIUM, TITANIUM, RARE METALS AND SEMICONDUCTORS» shows the research of possibility of rhenium extraction from molybdenium-containing solutions, obtained by autoclave decomposition of molybdenite concentrates by oxygen in the presence of nitric acid, with weakly basic anionites Purolite А170 and Purolite А172.

 

The article by members of All-Russian Scientific Research Institute of Aviation Materials, published in the section «METAL PROCESSING», shows the research of influence of two-stage thermal processing temperatures on microstructure and mechanical properties of forging from VT 43 (ВТ43) alloy. Researches were carried out on plates, manufactured by original technology in conditions of «VSMPO-AVISMA Corporation» JSC. There is shown that application of reinforcing thermal treatment provides the obtaining of not more than 1200 MPa of ultimate strength.

 

You may find below more details about the issue or book printed or electronic version of the journal.


ECONOMICS AND MANAGEMENT OF PRODUCTION
ArticleName International review of market of non-ferrous metals
ArticleAuthor Korneev S. I.
ArticleAuthorData

Korneev S. I., Senior Analyst of "Managing Company "Metalloinvest" LLC, e-mail: nirsks@yandex.ru

ArticleName Formation of cluster of rare-earth metals as a strategy of Rosatom State Nuclear Energy Corporation for development of Tomsk Oblast
ArticleAuthors Smirnova T. L., Subbotina L. G.
ArticleAuthorsData

Seversk Technological Institute — branch of National Research Nuclear University MEPhI (Moscow Engineering Physics Institute), Seversk, Russia:

T. L. Smirnova, Associate Professor of Economics Chair, e-mail: ctl2002@mail.ru
L. G. Subbotina, Senior Lecturer of Economics Chair

BENEFICIATION
ArticleName Usage of new flotation agent “P” during sulfide copper ores flotation
ArticleAuthors Sherembaeva R. T., Omarova N. K., Akimbekova B. B., Katkeeva G. L.
ArticleAuthorsData

Karaganda State Technical University, Karaganda, Kazakhstan:

R. T. Sherembaeva, Senior Lecturer, e-mail: rimkesh_62@mail.ru
N. K. Omarova, Assistant Professor
B. B. Akimbekova, Assistant Professor

 

Chemical-Metallurgical Institute named after Zh. Abishev, Karaganda, Kazakhstan:
G. L. Katkeeva, Leading Researcher

ArticleName Peculiarities of flotation of pyrite of one of copper-zinc deposits of Ural region by potassium butyl xanthate and sodum dithiophosphate
ArticleAuthors Goryachev B. E., Naing Linoo, Nikolaev A. A.
ArticleAuthorsData

Department of Enrichment of Non-Ferrous and Rare Metals Ores, National University of Science and Technology “MISiS”, Moscow, Russia:

B. E. Goryachev, Professor
Naing Linoo, Post Graduate Student
A. A. Nikolaev, Associate Professor, e-mail: nikolaevopr@misis.ru

HEAVY NON-FERROUS METALS
ArticleName Investigation of influence of roasting parameters of sulfide copper-nickel concentrate on material composition of obtained cinder
ArticleAuthors Savinova Yu. A., Portov A. B., Tsemekhman L. Sh.
ArticleAuthorsData

“Gipronickel Institute” LLC, Saint Petersburg, Russia:

Yu. A. Savinova, Junior Researcher
A. B. Portov, Researcher
L. Sh. Tsemekhman, Head of Laboratory of Pyrometallurgy, e-mail: LST@nikel.spb.su

NOBLE METALS AND ALLOYS
ArticleName Amursk hydrometallurgical plant is a key element of processing unit of Far Eastern “Polymetal” JSC
ArticleAuthors Filyanin G. A., Vorobev-Desyatovskiy N. V.
ArticleAuthorsData

“Polymetal Managing Company” JSC, Saint Petersburg, Russia:

G. A. Filyanin, Head of Concentration and Analytical Control Office, e-mail: Filjanin@polymetal.ru

 

“Polymetal Engineering” JSC, Saint Petersburg, Russia:
N. V. Vorobev-Desyatovskiy, Head of Hydrometallurgy Office, e-mail: Desatovs@polymetal.ru

ArticleName Extraction of gold from gold-copper raw materials
ArticleAuthors Strizhko L. S., Bobozoda Sh., Boboev I. R., Berger B. R.
ArticleAuthorsData

National University of Science and Technology “MISiS”, Moscow, Russia:
I. R. Boboev, Junior Researcher

 

1National University of Science and Technology “MISiS”, Moscow, Russia ; 2Irkutsk State Technical University, Irkutsk, Russia:

L. S. Strizhko, Professor (Chair of Non-Ferrous Metals and Gold)1, e-mail: sls_2007.47@mail.ru, Consultant of a Chair of Metallurgy of Non-Ferrous Metals2


Ministry of Industry and New Technologies of Republic of Tajikistan, Dushanbe, Republic of Tajikistan:

Sh. Bobozoda, Minister

“Yuzhuralzoloto Group of Companies” JSC, Plast, Chelyabinsk Oblast, Russia:
B. R. Berger, Acting Deputy Executive Officer

ArticleName Main problems of neutralization of cyanide-containing solutions and pulps of russian gold-mining industry. Part 1. Common approaches to issues of neutralization of cyanide wastes in Russia and abroad
ArticleAuthors Ermakov D. V., Vorobev-Desyatovskiy N. V.
ArticleAuthorsData

SRK Consulting, Moscow, Russia:

D. V. Ermakov, Senior Concentration Engineer

 

“Polymetal Engineering” JSC, Saint Petersburg, Russia:
N. V. Vorobev-Desyatovskiy, Head of Hydrometallurgy Office, e-mail: vdesjatovsky@polymetal.spb.ru

MAGNESIUM, TITANIUM, RARE METALS, SEMICONDUCTORS
ArticleName Research of kinetics of sulfuric acid extraction of lithium from spodumene-lepidolite mixture, activated by smelting with sodium carbonate
ArticleAuthors Onalbaeva Zh. S., Samoylov V. I., Kulenova N. A., Zelenin V. I., Baygazova N. A.
ArticleAuthorsData

D. Serikbayev East Kazakhstan State Technical University, Ust-Kamenogorsk, Republic of Kazakhstan:

Zh. S. Onalbaeva, Doctoral Candidate, e-mail: zhanara-05@mail.ru
V. I. Samoylov, Assistant Professor
N. A. Kulenova, Head of a Chair “Chemistry, metallurgy and concentration”

N. A. Baygazova, Assistant Professor of a Chair “Information systems”

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia:
V. I. Zelenin, Professor of a Chair “Rare Metals and Nanomaterials”

ArticleName Sorption extraction of rhenium in the time of hydrometallurgical processing of molybdenite concentrates by weakly basic anion exchange resins Purolite A170 and Purolite A172
ArticleAuthors Maltseva E. E., Blokhin A. A., Pleshkov M. A., Murashkin Yu. V., Mikhaylenko M. A.
ArticleAuthorsData

Saint Petersburg State Technological Institute, Saint Petersburg, Russia:

E. E. Maltseva, Post-Graduate Student
A. A. Blokhin, Professor, Head of a Chair of Technology of Rare Elements and Rare-Element-based Nanomaterials, e-mail: blokhin@list.ru

Yu. V. Murashkin, Assistant Professor


“Scientific-Research Center “Gidrometallurgiya” LLC, Saint Petersburg, Russia:

M. A. Pleshkov, Leading Researcher

 

Representative Office of Purolite company in CIS, Moscow, Russia:

M. A. Mikhaylenko, Representative on Scientific-Technical Problems

ArticleName Research of methods of processing of wastes, formed as a result of purification of titan technical tetrachloride
ArticleAuthors Gunko I. M., Egorov S. G.
ArticleAuthorsData

Chair of Metallurgy of Non-Ferrous Metals, Zaporozhia State Engineering Academy, Zaporozhia, Ukraine:

I. M. Gunko, Post-Graduate Student
S. G. Egorov, Assistant Professor, e-mail: egrv@rambler.ru

ArticleName Modeling of technological process of trichlorosilane production, using software package Aspen ONE.
ArticleAuthors Sokolov F. P., Suhova A. V., Samsonov V. A.
ArticleAuthorsData

“Giprosintez” LLC, Volgograd, Russia:

F. P. Sokolov, Chief Executive Officer, e-mail: info@giprosintez.ru
A. V. Sukhova, Deputy Chief Engineer of Project
V. A. Samsonov, Technical Director

METAL PROCESSING
ArticleName Research of influence of two-stage thermal processing temperatures on microstructure and mechanical properties of forged pieces, made of VT43 (ВТ43) alloy
ArticleAuthors Dinmukhametova D. I., Nochovnaya N. A., Tarasenko E. N.
ArticleAuthorsData

All-Russian Scientific Research Institute of Aviation Materials, Moscow, Russia:
D. I. Dinmukhametova, Engineer
N. A. Nochovnaya, Head of Laboratory, e-mail: nochovnaya_viam@mail.ru
E. N. Tarasenko, Leading Engineer

ArticleName Structure and properties of aluminum-silicon alloy ingots, obtained by magnetic-dynamic influence
ArticleAuthors Khripchenko S. Yu., Nikulin L. V., Dolgikh V. M., Denisov S. A.
ArticleAuthorsData

1Institute of Continuous Medium Mechanics of Ural Branch of Russian Academy of Sciences, Perm, Russia; 2Perm National Research Polytechnic University, Perm, Russia:

S. Yu. Khripchenko1,2, Professor, Leading Researcher

 

Institute of Continuous Medium Mechanics of Ural Branch of Russian Academy of Sciences, Perm, Russia:
L. V. Nikulin, Senior Researcher
V. M. Dolgikh, Senior Researcher
S. A. Denisov, Senior Researcher

ArticleName Research of contact friction forces and specific pressures in the time of rolling of strips, made of aluminium and its alloys
ArticleAuthor Maksimov E. A.
ArticleAuthorData

“Intray” JSC, Chelyabinsk, Russia:

E. A. Maksimov, Head of Rolling Equipment Department, e-mail: maksimov50@mail.ru

AUTOMATION
ArticleName Peculiarities of development of jet process in the time of blowing of liquid bath of horizontal converter. Part 1
ArticleAuthors Matyukhin V. I., Panshin A. M., Skopin D. Yu., Bulatov K. V.
ArticleAuthorsData

Ural Federal University named after the first president of Russia B. N. Yeltsin, Ekaterinburg, Russia:

V. I. Matyukhin, Assistant Professor of a Chair of Thermal Physics and Informatics in Metallurgy, e-mail: matyhin53@mail.ru

 

“UMMC” JSC, Verkhnyaya Pyshma, Russia:

A. M. Panshin, Technical Director

 

“Mednogorsk Copper-Sulfur Combine” JSC, Mednogorsk, Russia:

K. V. Bulatov, Chief Executive Officer
D. Yu. Skopin, Chief Metallurgist

Journals →  Tsvetnye Metally →  2014 →  #6