Journals →  Chernye Metally →  2015 →  #8

Chernye Metally


The No. 8 issue of "Chernye metally" journal is opened by the conventional section "Development of metallurgy in Russia and other CIS countries".


V. S. Dub, A. N. Romashkin and other specialists from TsNIITMASH Institute have presented the large review devoted to development of steel ingot casting technology. All stages of this technological chain, that are required for providing proper quality of steel ingots in correspondence with up-to-date machine-building standards, are displayed.


Another review describing the current state of national rolling production has been prepared by S. V. Rodinkov and A. M. Kriventsov, the specialists of VNIIMetMash Institute. The brief survey of the projects of rolling equipment that are now under preparing in this scientific-technical and engineering-designing center is given.


The problems of complete preparation and training of designing engineers, meeting the requirements of the current industrial development, are elucidated in the paper by A. B. Netkachev et al. from the Institute of Material Science and metallurgy of the Ural Federal University and Uralgipromez. The authors substantiated necessity of preparing of the project chief engineers, or managers on development of industrial complexes.


The section "Iron and Steel Production" includes two papers. The first of them is an economical review and examines the challenges and ways of the European iron and steel industry from the customer's point of view, while the second is scientific-technical one, presenting the results of the research project of ArcelorMittal Hamburg GmbH and the Institute of Automation of Helmut Schmidt University in Hamburg. This project was devoted to the model of adjusting of DRI feed intensity during charging in the electric arc furnace.


Three articles are located in the section "Surface coating and processing". M. Nörteshauser and his colleagues from the leading European steel producers have described their experience about usage of control systems for surface quality of steel products at their works in Ijmuiden, Linz, Salzgitter, Duisburg, Bremen and Hagen. I. Trenkner has analyzed possibilities of usage of the new MagiZinc zinc-magnesium coating produced by tat Steel for automotive industry. The problem of drying of strip coating using infrared rays has been investigated in the paper by M. Angerstein.

Wide possibilities of efficient steel usage as material in different fields are presented also in this issue, as well as two actual analytical reviews by H. J. Kerkhoff, the President of "Steel" economical union.


You may find below more details about the issue or book printed or electronic version of the journal.

Development of metallurgy in Russia and CIS
ArticleName Development of steel ingot casting technology
ArticleAuthors V. S. Dub, A. N. Romashkin, A. N. Malginov, I. A. Ivanov

State Research Center «CNIITMASH» (Moscow, Russia):

Dub V. S., Dr. Eng., Scientific Director of the Institute of Metallurgy and Machine-Building,
Romashkin A. N., Cand. Eng., Head of large Ingot Lab.,
Malginov A. N., Scientific Fellow,
Ivanov I. A., Cand. Phys.-Math., Leading Scientific Fellow,

ArticleName Several aspects of current development of rolling production in Russia
ArticleAuthors S. V. Rodinkov, A. M. Kriventsov

All-Russian Scientific and Research Institute of Metallurgical Machinery (Moscow, Russia):

Rodinkov S. V., Cand. Eng., Head opf Rolling Mills Dept.,
Kriventsov A. M., Dr Eng., Leading Scientific Fellow,

ArticleName Modern industrial development needs in training of specialists for metallurgical works
ArticleAuthors A. B. Netkachev, I. S. Plakhotin, S. V. Solovyev, V. V. Shimov

Ural State Federal University (Ekaterinburg, Russia):

Netkachev A. B., Ass. Prof., Chair of Metal Forming, Institute of Material Science and Metallurgy,
Plakhotin I. S., Cand. Econ.
Shimov V. V., Cand. Eng., Prof., Director of metallurgical Dept., Institute of Material Science and Metallurg,


Uralgipromez ISC (Ekaterinburg, Russia):

Solovyev S. V., Cand. Phys. Math., Head of IT Dept.

Iron and steelmaking
ArticleName Challenges to European steel industry from the custoner’s perspective
ArticleAuthors A. Hauger, T. Vietoris, V. Bentfeld

Benteler Steel/Tube GmbH (Paderborn, Germany):

Hauger H., Dr. Eng., CEO
Vietoris T., Dr. Eng., Head of Developmenmt Dept.
Bentfeld V., Mag. Sc., Technical Assistant

E-mail (common):

ArticleName Temperature-based DRI feeding into electric arc furnaces
ArticleAuthors M. Andersson, V. Haverkamp, K. Krüger, A. Jüchter, U. Brawn

Helmut-Schmidt University (Hamburg, Germany):

Andersson M., Mag. Eng., Scientifi c Fellow, Automation Institute,
Haverkamp V., Dr. Eng., Inv. Prof., Automation Institute

Max Aicher Unternehmensgruppe (Freilassing, Germany):
Krüger K., Dr. Eng., Prof., honor. Prof., Automation Institute, at p.t. Advisor


ArcelorMittal Hamburg GmbH (Hamburg, Germany):
Jüchter A., Mag. Eng., Head of Steel Mlting Shop & Reduction Unit
Braun U., Dr. Eng., Head of Dept.

Coating and Surface Treatment
ArticleName Optimized Zn–Mg-coating for extra large steel sheets for automotive industry
ArticleAuthor I. Trenkner

PR People International GmbH and Co. KG (Mühlheim an der Ruhr, Germany):

Trenkner I., PR Manager,

ArticleName Optimization of the coil coating process via drying by infrared rays
ArticleAuthor M. Angerstein

GoGaS Goch GnbH & Co. KG (Dotrmund, Germany):

Angerstein M., Mag. Eng.,

ArticleName M. Nцrtesheuser, J. Brandenburger, K. Jonker, A. Kogler, M. Krдtzner, W. Mimahl, G. Moninger, S. Schultz, S. Wiesemann. Surface inspection systems for steel products
Service and Technical Maintenance
ArticleName For the whole lifetime of the plant — more than a service concept
ArticleAuthors P. Tesè, Ch. Häusler

SMS Siemag AG (Düsseldorf, Germany):

Tesè P., Mag. Eng., Division Management Service
Häusler Ch., Mag. Eng., Division Management Service

E-mail (common):

Steel as material
ArticleName From atom to automobile
ArticleAuthor K. Müllges

Cologne, Germany:

Müllges K., Freelance Journalist

ArticleName Pilot engineering project for efficient mobility
ArticleName High-strength and well-formable light steel components
ArticleName New steels provide mass and cost saving for chassis
ArticleName High-tech steels for US automotive industry
ArticleName Construction of automobiles with sun batteries and using light steel components
ArticleName Challenging constructions of stainless steels
ArticleName Decorating of building faces with steel: ice crystals and metallic glitter
ArticleName Steel sculptures showing the way
ArticleName To save lifes with the help of stainless steel
Economics and Finances
ArticleName Politicians needs to change prospects
ArticleAuthor H. J. Kerkhoff

«Steel» Economical Union, VDEh Steel Insrtitute (Düsseldorf, Germany):

Kerkhoff H. J., President and CEO,

ArticleName Steel demand: slight uptake continues
ArticleAuthor H. J. Kerkhoff

«Steel» Economical Union, VDEh Steel Insrtitute (Düsseldorf, Germany):

Kerkhoff H. J., President and CEO,

Journals →  Chernye Metally →  2015 →  #8