Журналы →  Chernye Metally →  2019 →  №10

Chernye Metally


 

The issue has eight main sections, and the first of them, “Preparation of Raw Materials,” is devoted to the study and substantiation of structural and technological parameters of the process for grinding agglomeration fluxes in a hammer mill. The new design of the crusher hammers proposed by the authors has passed industrial tests at the charge preparation section of a sinter shop of one of enterprises.

 

In the section "Pig Iron Production", a system is proposed for automated control of blast distribution over the blast furnace air tuyeres and the subsequent change in the pulverized coal distribution along the furnace circumference in order to equalize or create a given non-uniformity of the theoretical combustion temperature.

 

A special section is devoted to the 55th anniversary of the chair for Material Science and Metallurgical Processes of Chuvash State University, it contains articles written by authors - representatives of this chair.

 

The section "Foundry" offers a second part of the article on the systematization of properties and parameters of foundry coke, devoted to its physical properties. A theoretically substantiated set of measures has also been proposed to increase the efficiency of smelting paraffinostearin model compounds in hot water, which has successfully passed tests in the current production environment.

 

In connection with the 55th anniversary of the Belarusian Metallurgical Plant, the journal published an interview «BMZ is the BMK Holding Management Company» with D. A. Korchik, the General Director of the OJSC.

 

The articles in the section “Rolling and other metal forming processes” are devoted to such topics as the controlled temperature control of the end of the rolling; modes of heating bimetallic billets in methodical furnaces and rolling in the pilgrim mill of the tube rolling complex 8-16″, aimed at minimizing defects in bimetallic wear-resistant tubes; the viability of using computer modeling to find ways for improving the stamping process and reducing the metal consumption of products; the influence of temperature and structure of a round billet on the split of grinding balls.

 

The section “Heating and heat treatment” describes a solution to the linear one-dimensional task of heat conduction for a plate, cylinder, and ball. An algorithm is proposed for solving direct and inverse one-dimensional task of heat conduction, as well as an algorithm for solving direct and inverse task of heat conduction for a cylinder with a limited height and a parallelepiped with a limited dimensions (with reference to any given point of these bodies).

 

In the section "Engineering Technologies" it is shown that when using ceramic plates, the radial component of the cutting force significantly exceeds the main one, which favorably affects the type of plate loading.

 

The October issue is finished by news on the latest foreign developments in the field of metallurgy.

 

Please find more details below, or order your printed or electronic version of the Journal.


Preparation of raw materials
Название Research and substantiation of structural and technological parameters of the process of grinding agglomeration fluxes in a hammer mill
Авторы A. P. Zhiltsov, D. A. Vlasenko, E. P. Levchenko
Информация об авторах

Lipetsk State Technical University (Lipetsk, Russia):

A. P. Zhiltsov, Cand. Eng., Associate Prof., Head of the Department «Metallurgical equipment», e-mail: kaf-mo@stu.lipetsk.ru

 

Donbass State Technical University (Alchevsk, Lugansk People’s Republic | Ukraine):
D. A. Vlasenko, Senior Lecturer, Dept. «Machines of the Metallurgical Complex»
E. P. Levchenko, Cand. Eng., Associate Prof., Dept. «Machines of the Metallurgical Complex»

Ironmaking
Название Effectiveness of implementation of the circumferential uneven PC distribution on the blast furnace air tuyeres
Авторы Yu. S. Semenov, V. V. Gorupakha, I. Yu. Semion, A. Yu. Orobtsev, E. I. Shumelchik
Информация об авторах

Iron and Steel Institute of the National Academy of Sciences of Ukraine (Dnipro, Ukraine):

Yu. S. Semenov, Dr. Eng., Senior Researcher, e-mail: yuriy.semenov.isi@gmail.com

 

ISD Scientific Technical Company (Dnipro, Ukraine):
V. V. Horupakha, Senior Researcher, e-mail: viktor.horupakha@gmail.com

 

Dneprovsky Iron and Steel Integrated Works (Kamianske, Ukraine):
I. Yu. Semion, Director on Quality
A. Yu. Orobtsev, Dr. Eng., Head of Technical Dept.

 

ATL-DP Private Enterprise (Dnipro, Ukraine):
E. I. Shumelchik, Dr. Eng., Senior Researcher, e-mail: ievgen.shumelchyk@gmail.com

55th anniversary of “Materials science and metallurgical processes” department of Chuvash State University
Название Water-based antiburning coatings for iron castings
Авторы T. R. Gilmanshina, I. E. Illarionov, A. A. Kovaleva, S. I. Lytkina
Информация об авторах

Siberian Federal University (Krasnoyarsk, Germany):

T. R. Gilmanshina, Cand. Eng., Associate Prof., e-mail: gtr1977@mail.ru
A. A. Kovaleva, Cand. Eng., Associate Prof., e-mail: angeli-kovaleva@yandex.ru
S. I. Lytkina, Cand. Eng., Associate Prof., e-mail: tmilp@rambler.ru

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof, Head of the Chair “Materials science and metallurgical processes”

Название BORAT metal-working coolant for machining metals
Авторы I. E. Illarionov, Sh. V. Sadetdinov, E. N. Zhirkov
Информация об авторах

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof, Head of the Chair “Materials science and metallurgical processes”, e-mail: tmilp@rambler.ru
Sh. V. Sadetdinov, Dr. Chem., Prof., Chair “Materials science and metallurgical processes”
A. V. Korolev, Cand. Eng., Associate Prof.

Zelenodolsk Designing and Engineering Office (Zelenodolsk, Russia):
E. N. Zhirkov, General Director

Название Effect of boric, borophosphoric and borophosphorous acids on properties of cold-hardening phosphate mixtures
Авторы I. E. Illarionov, Sh. V. Sadetdinov, O. V. Moiseeva, E. N. Zhirkov
Информация об авторах

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof, Head of the Chair “Materials science and metallurgical processes”, e-mail: tmilp@rambler.ru
Sh. V. Sadetdinov, Dr. Chem., Prof., Chair “Materials science and metallurgical processes”, e-mail: avgustaf@list.ru
O. V. Moiseeva, Lecturer, Chair “Materials science and metallurgical processes”, e-mail: MoiceevaLit@mail.ru

 

Zelenodolsk Designing and Engineering Office (Zelenodolsk, Russia):
E. N. Zhirkov, General Director

Casting and Foundry Production
Название Systematization of properties and parameters of foundry coke. Part 2. Physical properties
Авторы V. A. Ivanova, E. O. Pobegalova
Информация об авторах

Yaroslavl State Technical University (Yaroslavl, Russia):

V. A. Ivanova, Dr. Eng., Associate Prof., Head of the Chair “Technology of materials, standardization and metrology”, e-mail: ivanova-waleriya@mail.ru
E. O. Pobegalova, Senior Lecturer, e-mail: pobegalovaeo@gmail.com

Название Improving the efficiency of smelting paraffin-stearine precision casting models in hot water
Авторы L. I. Leushina, I. O. Leushin, O. S. Koshelev
Информация об авторах

Nizhniy Novgorod State Technical University (Nizhniy Novgorod, Russia):

L. I. Leushina, Cand. Eng., Associate Prof., the Chair “Metallurgical technologies and equipment”
I. O. Leushin, Dr. Eng., Prof., Head of the Chair “Metallurgical technologies and equipment”, e-mail: igoleu@yandex.ru
O. S. Koshelev, Dr. Eng., Prof., Chair “Engineering technological complexes”, e-mail: kafmto@mail.ru

Rolling and Other Metal Forming Processes
Название About prospects for production of coil rolled metal with small diameters in modern wire mills
Авторы V. A. Lutsenko, E. V. Parusov, S. A. Vorobey, T. M. Golubenko
Информация об авторах

Institute of Ferrous Metallurgy named after Z. I. Nekrasov (Dnepr, Ukraine):

V. A. Lutsenko, Dr. Eng., Senior Researcher, e-mail: lutsenkovlad2@gmail.com
E. V. Parusov, Cand. Eng., Senior Researcher
S. A. Vorobey, Dr. Eng., Senior Researcher
T. M. Golubenko, Cand. Eng., Senior Researcher

Название Development and mastering of a technology for production of seamless bimetallic tubes for transporting abrasive bulk materials
Авторы A. I. Komarov, A. V. Safyanov, V. Ya. Osadchiy, A. P. Kolikov
Информация об авторах

Chelyabinsk Pipe Rolling Plant (Chelyabinsk, Russia):

A. I. Komarov, Chairman of the Board
A. V. Safyanov, Cand. Eng., Technologist of Production Technological Dept., e-mail: anatoliy.safyanov@chelpipe.ru

 

Moscow Technological University (Moscow, Russia):
V. Ya. Osadchiy, Dr. Eng., Prof., Advisor of General Director Chelyabinsk Pipe Rolling Plant

 

National University of Science and Technology “MISiS” (Moscow, Russia):
A. P. Kolikov, Dr. Eng., Prof., Metal Forming Dept., e-mail: apkolikov@mail.ru

Название Simulation of hot stamping of elliptical steel bottoms
Авторы Yu. D. Gorbunova, G. A. Orlov
Информация об авторах

Ural Federal University (Ekaterinburg, Russia):

Yu. D. Gorbunova, Engineer, Post-graduate
G. A. Orlov, Dr. Eng., Prof., e-mail: grorl@mail.ru

Название The effect of temperature and structure of a round billet on the split behavior of grinding balls
Автор I. K. Galimyanov
Информация об авторе

Nizhniy Tagil Iron and Steel Works — “EVRAZ NTMK” JSC (Nizhniy Tagil, Russia):

I. K. Galimyanov, Leading Engineer of Technical Department, Head of the Technological Office of the Heavy-section Shop, e-mail: Ilyas.Galimyanov@evraz.com

Heating and heat treatmwnt
Название The linear heat conduction problem for bodies with a regular shape under boundary conditions of the third kind
Автор I. A. Levitskiy
Информация об авторе

National University of Science and Technology “MISiS” (Moscow, Russia):

Levitskiy I. A., Cand. Eng., Assocoate Prof., Dept. “Power-efficient and resourcesaving industrial technologies”, e-mail: lewwwis@mail.ru

Engineering technologies
Название The study of the cutting force components when cutting threads with ceramic plates in three-jaw chucks
Авторы A. S. Yamnikov, O. A. Yamnikova, A. O. Chuprikov
Информация об авторах

Tula State University (Tula, Russia):

A. S. Yamnikov, Dr. Eng., Prof., Chair of Machine-building Technology, e-mail: Yamnikovas@mail.ru

 

NPO “Splav” (Tula, Russia):
O. A. Yamnikova, Dr. Eng., Prof., 1st category Specialist of risk management, e-mail: yamnikovaoa@mail.ru

 

JSC “Tulsky Oruzheiny Zavod” (Tula, Russia):
A. O. Chuprikov, Cand. Eng., Head of Intellectual Property Department, e-mail: artemline@rambler.ru

Журналы →  Chernye Metally →  2019 →  №10