Journals →  CIS Iron and Steel Review →  2019 →  #2

CIS Iron and Steel Review



Materials Science
ArticleName Extension of ASTM E2283 standard practice for the assessment of large exogenous nonmetallic inclusions in super duty steels
ArticleAuthors A. A. Kazakov, A. I. Zhitenev, M. A. Salynova
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

A. A. Kazakov, Dr. Eng., Prof., Head of “Metallurgical Examination” Lab., e-mail: kazakov@thixomet.ru
A. I. Zhitenev, Engineer, “Metallurgical Examination” Lab., e-mail: zhitenev@thixomet.ru
M. A. Salynova, Engineer, “Metallurgical Examination” Lab.

ArticleName Study of the effect of graphitized annealing on microstructure of chromium-nickel cast iron
ArticleAuthors K. N. Vdovin, D. A. Gorlenko, N. A. Feoktistov
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

K. N. Vdovin, Dr. Eng., Prof., Dept. of Foundry Production and Material Processing, e-mail: kn.vdovin@gmail.com
D. A. Gorlenko, Cand. Eng., Senior Lecturer of Dept. of Foundry Production and Material Processing, e-mail: gorldima@yandex.ru
N. A. Feoktistov, Cand. Eng., Associate Prof., Head of Dept. of Foundry Production and Material Processing, e-mail: fna87@mail.ru

ArticleName Mechanical properties of prestressing strands and how they tend to change under thermo-mechanical treatment
ArticleAuthors A. G. Korchunov, M. A. Polyakova, D. V. Konstantinov, M. Dabalá
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. G. Korchunov, Dr. Eng., Prof., Vice-Rector for International Affairs, e-mail: international@magtu.ru
M. A. Polyakova, Dr. Eng., Prof., Dept. of Material Processing Technologies, e-mail: m.polyakova@magtu.ru
D. V. Konstantinov, Cand. Eng., e-mail: magstu.international@gmail.com

 

University of Padova (Padova, Italy):
M. Dabalá, Dr. Eng., Prof., Dept. of Industrial Engineering, e-mail: manuele.dabala@unipd.it

ArticleName Development of duplex stainless steels compositions
ArticleAuthors A. A. Kazakov, A. I. Zhitenev, A. S. Fedorov, O. V. Fomina
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University (St. Petersburg, Russia):

A. I. Zhitenev, Engineer, “Metallurgical Examination” Lab., e-mail: zhitenev@thixomet.ru
A. S. Fedorov, Engineer, “New Technologies and Materials” Scientific and Technological Complex

 

Central Research Institute of Structural Materials “Prometey” named by I. V. Gorynin of National Research Center “Kurchatov Institute” (St. Petersburg, Russia):

A. A. Kazakov, Dr. Eng., Prof., Head of “Metallurgical Examination” Lab., e-mail: kazakov@thixomet.ru
O. V. Fomina, Dr. Eng., Head of Scientific and Production Complex

Casting
ArticleName Development of the conditional activation criterion to evaluate graphite activity
ArticleAuthors T. R. Gilmanshina, I. E. Illarionov, S. I. Lytkina, S. A. Khudonogov
ArticleAuthorsData

Siberian Federal University (Krasnoyarsk, Russia):

T. R. Gilmanshina, Cand. Eng., Associate Prof., e-mail: tmilp@rambler.ru
S. I. Lytkina, Cand. Eng., Associate Prof.
S. A. Khudonogov, Senior Lecturer


I. N. Ulyanov Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof., Head of the Dept. “Materials science and metallurgical processes”, e-mail: gtr1977@mаil.ru

 

E. N. Zhirkov participated in preparation of experimental materials and scientific data for this article.

Rolling and Metal Forming
ArticleName Study of kinematics of elastic-plastic deformation for hollow steel shapes used in energy absorption devices
ArticleAuthors D. B. Efremov, A. A. Gerasimova, S. M. Gorbatyuk, N. A. Chichenev
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia)

D. B. Efremov, Cand. Eng., Associate Prof., Dept. of Metal Forming
A. A. Gerasimova, Cand. Eng., Associate Prof., Dept. of Engineering of Technological Equipment, e-mail: gerasimova.aa@misis.ru
S. M. Gorbatyuk, Dr. Eng., Prof., Head of Dept. of Engineering of Technological Equipment
N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering of Technological Equipment, e-mail: chich38@mail.ru

ArticleName Improvement of production of billet rods of metallic shell of automatic spark plug for rising usability of finished products
ArticleAuthors G. S. Gun, K. G. Pivovarova, A. A. Sokolov, N. V. Tokareva
ArticleAuthorsData

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):

G. S. Gun, Dr. Eng., Prof., Rector Advisor
K. G. Pivovarova, Cand. Eng., Associate Prof., Dept. of Material Processing Technologies, e-mail: k.pivovarova@magtu.ru

“MMK-METIZ” OJSC (Magnitogorsk, Russia):

N. V. Tokareva, Head of Metallographic Lab, Central Plant Laboratory

A. A. Sokolov, Chief Specialist on Research Works, Central Plant Laboratory

 

K. A. Antoshkina participated in this research.

ArticleName Use of resource-saving technologies in fabrication and restoration of steel bushing-type components via hot plastic deformation
ArticleAuthors K. P. Kolotyrin, S. A. Bogatyrev, D. Yu. Savon, A. V. Aleksakhin
ArticleAuthorsData

Saratov State Agrarian University named after N. I. Vavilov (Saratov, Russia):

K. P. Kolotyrin, Dr. Econ., Prof., Dept. of Organization of Production and Business Management in Agro-Industrial Complex, e-mail: kpk75@mail.ru
S. A. Bogatyrev, Dr. Eng., Prof., Dept. of Organization of Production and Business Management in Agro-Industrial Complex, e-mail: tettet@inbox.ru


National University of Science and Technology “MISiS” (Moscow, Russia):
D. Yu. Savon, Dr. Econ., Prof., Dept. “Industrial Management”, e-mail: di199@yandex.ru
A. V. Aleksakhin, Cand. Econ., Associate Prof., Dept. “Economics”, e-mail: aleksakhin@mail.ru

ArticleName Approximate calculation method of subwater pipeline's form under its laying on sea-bottom
ArticleAuthor V. N. Shinkin
ArticleAuthorData

National University of Science and Technology “MISIS” (Moscow, Russia):

V. N. Shinkin, Dr. Sci. (Phys.-Math.), Prof., e-mail: shinkin-korolev@yandex.ru

Coating
ArticleName Application of Zr–Si–B electrodes for electrospark alloying of Inconel 718 in vacuum, argon and air environment
ArticleAuthors A. E. Kudryashov, Ph. V. Kiryukhantsev-Korneev, M. I. Petrzhik, E. A. Levashov
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia)

A. E. Kudryashov, Cand. Eng., Leading Researcher, Scientific-Educational Center of SHS MISiS-ISMAN, e-mail: aekudr@yandex.ru
Ph. B. Kiryukhantsev-Korneev, Cand. Eng., Associate Prof., Department of Powder Metallurgy and Functional Coatings; Leading Researcher, Scientific-Educational Center of SHS MISiS-ISMAN, e-mail: kiruhancev-korneev@yandex.ru
M. I. Petrzhik, Dr. Eng., Prof., Scientific-Educational Center of SHS MISiS-ISMAN
E. A. Levashov, Dr. Eng., Prof., Head of the Department of Powder Metallurgy and Functional Coatings; Director, Scientific-Educational Center of SHS MISiS-ISMAN

Powder Metallurgy and Additive Technologies
ArticleName Self-propagating high-temperature synthesis (SHS) of composite ferroalloys
ArticleAuthors I. M. Shatokhin, M. Kh. Ziatdinov, I. R. Manashev, O. P. Shiryaev, A. D. Kartunov
ArticleAuthorsData

NTPF “Etalon” (Magnitogorsk, Russia):

Shatokhin I. M., General Director


Tomsk State University (Tomsk, Russia):
Ziatdinov M. Kh., Dr. Eng., Leading Researcher

 

Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia):
Manashev I. R., Cand. Eng.
Kartunov A. D., Head of Technical Dept.

 

Magnitogorsk Iron and Steel Works (Magnitogorsk, Russia):

Shiryaev O. P., Deputy General Director on Production

 

E-mail: mirney@yandex.ru

 

Gavrilova T. O., Deputy general director of NPTF “Etalon”, participated in this research.

ArticleName Production of iron and silicon-doped max phases by self-propagating high-temperature synthesis
ArticleAuthors V. A. Martirosyan, M. E. Sasuntsyan, N. G. Saakyan, A. A. Frangulyan
ArticleAuthorsData

National Polytechnic University of Armenia (Erevan, Armenia)

V. A. Martirosyan, Dr. Eng., Prof., Dept. of General Chemistry and Chemical Processes, e-mail: v.a.martirosyan@mail.ru
M. E. Sasuntsyan, Cand. Eng., Associate Prof., Dept. of General Chemistry and Chemical Processes, e-mail: msasuntsyan@mail.ru
N. G. Saakyan, Post-graduate, Faculty of Metallurgy and Mineral Development, e-mail: nina.saakyan@mail.ru
A. A. Frangulyan, Cand. Eng., Head of the Faculty of Metallurgy and Mineral Development, e-mail: albertaranea@mail.ru

ArticleName Anisotropy of the mechanical properties of austenitic steel products obtained by selective laser melting
ArticleAuthors M. G. Isaenkova, Yu. A. Perlovich, A. E. Rubanov, A. V. Yudin
ArticleAuthorsData

National Research Nuclear University “MEPhI”, Moscow, Russia:

M. G. Isaenkova, Dr. Phys.-Math., Prof., e-mail: isamarg@mail.ru
Yu. A.Perlovich, Dr. Phys.-Math., Prof., Leading Scientific Researcher
A. E. Rubanov, Post-graduate, e-mail: toly.rubanov@yandex.ru
A. V. Yudin, Post-graduate

Ecology and Environment Protection
ArticleName Econometric modeling of secondary resources of iron
ArticleAuthors Yu. B. Sayadova, P. I. Chernousov, O. V. Golubev
ArticleAuthorsData

National University of Science and Technology “MISiS” (Moscow, Russia)

Yu. B. Sayadova, Post-graduate, Dept. of Energy-Efficient and Resource-Saving Industrial Technologies, e-mail: shadowdomenika@rambler.ru
P. I. Chernousov, Cand. Eng., Associate Prof., Dept. of Energy-Efficient and Resource-Saving Industrial Technologies, e-mail: p.chernou@yandex.ru
O. V. Golubev, Cand. Eng., Associate Prof., Dept. of Energy-Efficient and Resource-Saving Industrial Technologies, e-mail: olega-san@yandex.ru

ArticleName Purification of circulating and waste water in metallurgical industry using complex coagulants
ArticleAuthors E. N. Kuzin, N. E. Kruchinina
ArticleAuthorsData

Mendeleyev University of Chemical Technology of Russia (Moscow, Russia):

E. N. Kuzin, Cand. Eng., Department of Environmental Engineering, E-mail: e.n.kuzin@mail.ru
N. E. Kruchinina, Dr. Eng., Head of Faculty of Biotechnology and Environmental Engineering, Head of Department of Environmental Engineering, E-mail: krutch@muctr.ru

Journals →  CIS Iron and Steel Review →  2019 →  #2