Journals →  Chernye Metally →  2020 →  #1

Chernye Metally

The January issue of the journal is opened by the “Steel Production” section. Inteco's innovative equipment for electric arc furnaces, solutions to increase their efficiency and operational safety are presented. The capabilities of a new circulation degasser at Ternium in the st. Rio de Janeiro (Brazil) were shown. The first part of the article devoted to ferroalloys discusses the raw material base and the dynamics of Russian production and consumption of basic (large-capacity) ferroalloys for 2002–2018.

In the section “Rolling and other metal forming processes”, the first part of the article is presented, which is devoted to the main trends in the development of rolled products, pipes and metal products in 2017–2019. The production of sheet, long products and metal products is considered. An article by foreign authors is devoted to Isra Vision's new technologies for two- and three-dimensional surface control of steel products, aimed at increasing the yield of high-quality products. Esslingen’s university research on determination of blisters using active thermography in order to identify the boundaries of applicability of this method and its optimization is described.

The section "Metal Science and Metallography" contains two articles. The first examined the effect of microheterogeneity destruction on the microstructure and crystal structure of 110g13l steel ingots (Hadfield steel): it is shown that these changes should increase the ductility and corrosion resistance of the metal. The second article is devoted to the features of cast and deformed steel used for the production of machine parts. The advantage of hot-deformed steel semi-finished products over cast in terms of mechanical properties is shown.

The section “Protection against corrosion” describes effective corrosion inhibitors that can be used to protect ferrous metals by introducing them into various technological environments at engineering enterprises.


In the section “Ecology and Recycling”, a methodology for optimizing the organizational and economic system of recycling, which can be successfully used for metallurgical processing wastes of ferrous metals ores benefication is proposed.

The section “On the 75th anniversary of the Victory” is devoted to the study of the chemical composition of the self-propelled artillery units armored steel produced by the Ural Heavy Machines Building Plant during the Great Patriotic War.

The January issue of the journal is completed by news of the iron and steel industry and the Chronicle section, in which the reader learns about the opening of the most efficient mini-thermal power station in the Urals at the Nadezhda Metallurgical Plant.


Please find more details below, or order your printed or electronic version of the Journal.

ArticleName EAF state-of-the-art solutions and their technological practice
ArticleAuthors H. Holzgruber, Ch. Redl, R. Gottardi, A. Partyka

Inteco Holding GmbH,(Bruck an der Mur, Austria):

H. Holzgruber, Dr., CEO


Inteco Melting and Casting Technologies GmbH, (Bruck an der Mur, Austria):

Ch. Redl, Deputy General Manager, Vice President of Sales
R. Gottardi, Dr., Vice President and Sales Director
A. Partyka, Mag. Eng., Chief Technologist


ArticleName A Ternium’s new RH vacuum degasser in Brazil is a next step in the framework of Industry 4.0 concept
ArticleAuthors A. Pezza, B. Lopes, H. Gomes, L. Demuner

Primetals Technologies Germany GmbH (Willstätt, Germany):

A. Pezza, e-mail:


Ternium Brasil Ltda. (Rio de Janeiro, Brazil):
B. Lopes

H. Gomes

L. Demuner

ArticleName The raw material base of ferroalloys and features of development of their production in Russia. Part 1. Basic ferroalloys
ArticleAuthors G. Yu. Boyarko, B. N. Matveev

Tomsk Polytechnic University (Tomsk, Russia):

G. Yu. Boyarko, Dr. Eng., Prof., Natural Resources Engineering School


All-Russian Institute of Scientific and Technical Information RAS (Moscow, Russia):
B. N. Matveev, Dr. Eng., Prof, head of Dept. of Scientific Information on Metallurgy


Rolling and other Metal forming processes
ArticleName The main trends in the development of production of rolled products, pipes and hardware in 2017–2019. Part 1. Production of fl at and long products and hardware
ArticleAuthor N. N. Gugis

”Chermet” Corporation (Moscow, Russia):

N. N. Gugis, President, e-mail:

ArticleName 3D slab and and heavy plate control
ArticleAuthor St. Burkhardt

Isra Parsytec GmbH (Aachen, Germany):

St. Burkhardt, Dr., CEO, e-mail:

ArticleName Non-destructive control of defects in the surface layer of flat products
ArticleAuthors T. Eisele, H. Lucken, Ph. Skoda

High school of Esslingen (Esslingen, Germany):

T. Eisele, Mag. Sci., Scientific researcher, e-mail:
H. Lücken, Dr. Eng., Prof., Transport technology faculty


Deutsches Kupferinstitut Berufsverband e. V. (Düsseldorf, Germany):
Ph. Skoda, Dr. Eng., Dept. of Industrial Technologies for Connection of Materials

Metal science and Metallography
ArticleName Effect of destruction of microheterogeneity on microstructure and crystal structure of 110G13L steel ingots (Hadfield steel)
ArticleAuthors I. I. Sinitsyn, O. A. Chikova, D. S. Chezganov

Ural Federal University (Ekaterinburg, Russia):

I. I. Sinitsyn, Post-graduate, Dept. of Physics, Institute of Fundamental education, e-mail:
O. A. Chikova, Dr. Phys.-Math., Prof., Dept. of Physics, Institute of Fundamental education, e-mail:
D. S. Chezganov, Cand. Phys.-Math., Senior Researcher, Dept. of Optoelectronics and Semiconductors Technology, Institute of Natural Science and Mathematics, e-mail:

ArticleName Features of the use of cast and deformed steel for machine parts
ArticleAuthors A. M. Pesin, T. V. Shveyova, D. O. Pustovoitov

Magnitogorsk State Technical University (Magnitogorsk, Russia):

A. M. Pesin, Dr. Eng., Prof., Dept. of Materials Processing Technologies, e-mail:
T. V. Shveyova, Cand. Eng., Associate Prof., Research Engineer, Scientific and Research Center, e-mail:
D. O. Pustovoitov, Cand. Eng., Associate Prof., Dept. of Materials Processing Technologies, e-mail:

Anti-corrosion protection
ArticleName Effect of borates on corrosion resistance of St3 steel in solutions of synthetic detergents
ArticleAuthors I. E. Illarionov, Sh. V. Sadetdinov, I. V. Fadeev, I. A. Strelnikov, E. P. Shalunov

I. N. Ulyanov Chuvash State University (Cheboksary, Russia):

I. E. Illarionov, Dr. Eng., Prof, Head of the Dept. “Materials science and metallurgical processes”, e-mail:

I. A. Strelnikov, Cand. Eng., Associate Prof, Dept. “Materials science and metallurgical processes”, e-mail:


“Elkon” JSC (Cheboksary, Ruissia):
Sh. V. Sadetdinov, Dr. Chem., Chief Technolgist, e-mail:


I. Ya. Yakovlev Chuvash State Pedagogic University (Cheboksary, Russia):
I. V. Fadeev, Cand. Eng., Head of Engineering Science Dept.


“Diskom” JSC (Cheboksary, Russia):

E. P. Shalunov, Cand. Eng., Innovations Director

Ecology and Recycling
ArticleName Diagnostics of efficiency and optimization of the organizational and economic system of ferrous metals recycling
ArticleAuthor G. V. Dzhandieri

Metallurgical Engineering and Consulting Ltd. (Tbilisi, Georgia):

G. V. Dzhandieri, Cand. Eng., Director, e-mail:

Meeting 75th Anniversary of the Victory
ArticleName Armoured steel for Uralmash self-propelled artillery vehicle
ArticleAuthors B. A. Gizhevskiy, N. N. Melnikov, Vas. V. Zapariy, Vl. V. Zapariy

Institute of Metal Physics, Ural branch of the Russian Academy of Sciences (Ekaterinburg, Russia):

B. A. Gizhevskiy, Cand Phys.-Math., e-mail:


Institute of History and Archeology, Ural branch of the Russian Academy of Sciences (Ekaterinburg, Russia):
N. N. Melnikov, Cand Hist., Associate Prof., e-mail:
Vas. V. Zapariy, Cand Hist., Associate Prof., e-mail:


Ural Federal University (Ekaterinburg, Russia):
V. V. Zapariy, Dr. Hist., Prof., Dept. of Gistory and Social relations, e-mail:

Journals →  Chernye Metally →  2020 →  #1