Tsvetnye Metally
The opening publication of the August issue of Tsvetnye Metally includes a review of the international non-ferrous metals market (based on the July 2020 data).
This issue contains some selected articles authored by Kola Mining and Metallurgical Company. The authors describe the changes that took place in the company following major revamping. Thus, the papers cover the issues of environmental and economical safety.
One of the papers published in the Light Metals, Carbon Materials section describes the results of experimental studies that looked at the formation rate and properties of cryolite-alumina crusts in electrolytic cells. The obtained results can be used to calculate the heat losses occurring in cells through the cryolite-alumina crust. The process personnel can use these data to analyze the cell response to a different type of alumina.
The Composites and Multipurpose Coatings section features an article entitled as follows: Study of polycrystalline diamonds produced by infiltration method using natural and synthetic diamond powders. The authors describe a research project conducted to better understand the key physical and mechanical properties of PCD composites.The composite materials were produced by infiltration method using two binding materials (Ni – Si and Mn – Si alloys) and two diamond powders (the ASM grade of synthetic powder and the AM grade of natural powder). A comparative analysis of theproperties of the composites was also carried out.
The article “Reactive phase formation during electrospark treatment of the EP741NP alloy with fusible Al – Si electrode” published in the Metal Processing section describes a trial which tested a technique for producing homogenous fusible electrodes by melt quenching and electrospark treatment. These processes ensure surface hardening and smoothing of the nickel alloy EP741NP. It was found that high-frequency electrospark treatment with shorter pulse discharges leads to reactionless mass transfer of the ductile FCC Al-based solid solution resulting in a complete wear of the modified layers during tribotesting.
Please find more details below, or order your printed or electronic version of the Journal.
| HEAVY NON-FERROUS METALS | |
| ArticleName | Understanding the process of smelting copper-rich high-silicon concentrates in combination with copper-rich high-sulphur concentrates |
| ArticleAuthors | Kozhakhmetov S. M., Kvyatkovskiy S. A., Semenova A. S., Baysanov A. S. |
| ArticleAuthorsData | Satbayev University, Institute of Metallurgy and Ore Beneficiation, Almaty, Republic of Kazakhstan: S. M. Kozhakhmetov, Principal Researcher, e-mail: entc-sultan@mail.ru
Zh. Abishev Chemical-Metallurgical Institute, Karaganda, Republic of Kazakhstan: |
| ArticleName | Nitric acid leaching of the copper-bearing arsenic sulphide concentrate of Akzhal |
| ArticleAuthors | Rogozhnikov D. A., Zakharian S. V., Dizer O. A., Karimov K. A. |
| ArticleAuthorsData | Ural Federal University named after the First President of Russia B. N. Yeltsin, Yekaterinburg, Russia: D. A. Rogozhnikov, Senior Researcher, Department of Non-Ferrous Metallurgy, Candidate of Technical Sciences, Assistant Professor, e-mail: darogozhnikov@yandex.ru
KazGidroMed, Karaganda, Republic of Kazakhstan: S. V. Zakharian, Head of the Laboratory, Candidate of Technical Sciences |
| ArticleName | Developing a technique for processing fine copper smelter dusts |
| ArticleAuthors | Marchenko N. V., Kovtun O. N. |
| ArticleAuthorsData | Siberian Federal University, Krasnoyarsk, Russia: N. V. Marchenko, Associate Professor, Department of General Metallurgy1, Candidate of Technical Sciences, e-mail: natashmarchenk@mail.ru |
| ArticleName | Сomplex processing of lead-containing industrial products by vacuum distillation |
| ArticleAuthors | Naboychenko S. S., Korolev A. A., Maltsev G. I., Timofeev K. L. |
| ArticleAuthorsData | Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia: S. S. Naboychenko, Professor-Consultant, Department of Metallurgy of Non-Ferrous Metals, Institute of New Materials and Technologies, Doctor of Technical Sciences
JSC “Uralelectromed”, Verkhnyaya Pyshma, Russia: G. I. Maltsev, Chief Specialist of the Research Centre, Doctor of Technical Sciences, e-mail: mgi@elem.ru |
| SCIENTIFIC AND TECHNICAL DEVELOPMENTS OF THE KOLA MMC JSC | |
| ArticleName | Analyzing the status of northern taiga forests amid reduced Severonikel emissions |
| ArticleAuthors | Sukhareva T. A., Ershov V. V., Isaeva L. G., Shkondin M. A. |
| ArticleAuthorsData | Institute of the Industrial Ecology Problems of the North, Federal Research Centre, Kola Research Centre, Russian Academy of Sciences, Apatity, Russia: T. A. Sukhareva, Senior Researcher, Candidate of Biological Sciences, e-mail: sukhareva@inep.ksc.ru
Kola MMC JSC, Monchegorsk, Russia: |
| LIGHT METALS AND CARBON MATERIALS | |
| ArticleName | Production of rich aluminum master alloys containing scandium, yttrium and zirconium for non-ferrous and ferrous metallurgy |
| ArticleAuthors | Yatsenko S. P., Skachkov V. М., Pasechnik L. А. |
| ArticleAuthorsData | Institute of Solid State Chemistry of the Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia: S. P. Yatsenko, Principal Researcher, Professor, Doctor of Chemical Sciences, e-mail: yatsenko@ihim.uran.ru |
| ArticleName | Dynamics of formation and properties of cryolite-alumina crusts |
| ArticleAuthors | Isaeva L. A., Mikhalev Yu. G., Zharinova N. Yu. |
| ArticleAuthorsData | Siberian Federal University, Krasnoyarsk, Russia: L. A. Isaeva, Associate Professor at the Department of Non-Ferrous Metallurgy, Candidate of Chemical Sciences |
| COMPOSITES AND MULTIPURPOSE COATINGS | |
| ArticleName | Study of polycrystalline diamonds produced by infiltration method using natural and synthetic diamond powders |
| ArticleAuthors | Shorstov S. Yu., Sorokin M. N., Razmakhov M. G., Marakhovskiy P. S. |
| ArticleAuthorsData | All-Russian Scientific Research Institute of Aviation Materials, Moscow, Russia: S. Yu. Shorstov, 1st Category Technician at the Laboratory of Heat-Transfer Properties, Sshorstov7@gmail.com
National University of Science and Technology MISiS, Moscow, Russia: M. N. Sorokin, Lead Engineer at the Laboratory of Ultra-Hard Materials, sorokin@misis.ru |
| MATERIALS SCIENCE | |
| ArticleName | Understanding the effect produced by combined processing and drawing on the structure and properties of conductive semi-finished products made of Al – Zr alloys |
| ArticleAuthors | Bespalov V. M., Sidelnikov S. B., Belokopytov V. I., Voroshilov D. S. |
| ArticleAuthorsData | Siberian Federal University, Krasnoyarsk, Russia: V. M. Bespalov, Associate Professor at the Department of Engineering bachelor CDIO, Сandidate of Technical Sciences, Associate Professor, e-mail: vmbespalov@mail.ru |
| ArticleName | The structure of AlFe5 master alloys produced from recyclable scrap steel and its effect on the properties of aluminium alloys |
| ArticleAuthors | Nikitin K. V., Nikitin V. I., Deev V. B., Timoshkin I. Yu. |
| ArticleAuthorsData | Samara State Technical University, Samara, Russia: K. V. Nikitin, Dean of the Faculty of Mechanical Engineering, Metallurgy and Transport, Doctor of Technical Sciences, Professor, e-mail: kvn-6411@mail.ru
Wuhan Textile University, Wuhan, China1 ; National University of Science and Technology MISiS, Moscow, Russia2: |
| METAL PROCESSING | |
| ArticleName | Reactive phase formation during electrospark treatment of the EP741NP alloy with fusible Al – Si electrode |
| ArticleAuthors | Mukanov S. K., Kudryashov A. E., Naumova E. A., Petrzhik M. I. |
| ArticleAuthorsData | National University of Science and Technology MISiS, Moscow, Russia: S. K. Mukanov, Postgraduate Student, Engineer at Scientific-Education Center for Self-Propagating High-Temperature Synthesis (SHS) MISiS – ISMAN |
