Chernye Metally
The Chernye Metally journal, No. 11-2021, was published, which is mainly dedicated to the anniversary of the united chair for Metallurgy and materials processing technologies of the Sukhoi State Technical University of Gomel. The articles of this section highlight the issues of the effect of the deformation rate on mechanical properties and microhardness of a thin steel wire made of 80 steel, the effect of speed parameters of reduction on the accuracy of the resulting pipe profile, the study of physical and mechanical properties of rapidly quenched strips made of multicomponent iron-based alloys, improving the quality of traditional products due to the use of alloys with unique service properties and the modernization of the Hunter method.
The issue of the journal is headed by the Ore dressingsection, where an article by the authors of the Bakor Scientific and Technical Center has been published, which acquaints readers with reasons for a sharp decrease in the filtering ability of ceramic elements, as well as with the search for a solution to restore the filter elementsefficiency.
The Steel production and metal sciencesection presents an article ofauthors of the South Ural State University, in which the issues of using hydrogen instead of carbon as a reductant in ferrous metallurgy, as well as the second part of S. V. Davydov's article “Phase equilibria in the carbide region of the iron-carbon diagram”, which offers a complete diagram of the iron-carbide ε-Fe2C system in the concentration range of 0-9.7% C without lines of graphite and diamond liquidus. The first part of this article was published in No. 9, 2021.
In the Rolling and other Metal Forming processessection three articles of authors of the Nosov Magnitogorsk State Technical University has been published, which are devoted to assessing the effect of plastic reduction on the stress-strain state of reinforcing bars, plotting dependencies for choosing rational strip tensions in the digital twin of a cold rolling mill, as well as the peculiarities of the formation of mechanical properties in shaped bars made of 09G2S steel in the process of accelerated water cooling.
In the same issue, publications are presented in the Energy, ecology and recyclingsection.
The Chronicle section contains material dedicated to the memory of Academician L. A. Vaisberg.
Please find more details below, or order your printed or electronic version of the Journal.
| Mineral processing | |
| ArticleName | Chemical method of restoring the filtering ability of ceramic filter elements |
| ArticleAuthors | B. L. Krasnyi, I. G. Zimbovskiy, U. V. Dmitrakova, E. D. Chylbak-ool |
| ArticleAuthorsData | Bakor Scientific and Technical Center Ltd. (Moscow, Russia): B. L. Krasnyi, Dr. Eng., General Director,, e-mail: bakor@nicbakor.ru National University of Science and Technology “MISiS” (Moscow, Russia): |
| Steelmaking and Metal science | |
| ArticleName | Technological and materials science aspects of the transition in ferrous metallurgy to carbon-free processes |
| ArticleAuthors | V. E. Roshchin, A. V. Roshchin, Yu. S. Kuznetsov, Yu. N. Goikhenberg |
| ArticleAuthorsData | South Ural State University (Chelyabinsk, Russia): V. E. Roshchin, Dr. Eng., Prof., Dept. of Pyrometallurgical and Foundry Technologies, e-mail: vero@susu.ru |
| ArticleName | Phase equilibriums in the carbide area of the «iron-carbon» diagram. Part 2. Complete diagram of the iron - ε-Fe2C carbide system |
| ArticleAuthor | S. V. Davydov |
| ArticleAuthorData | Bryansk State Technical University (Bryansk, Russia): S. V. Davydov, Dr. Eng., Prof., Dept. of Tribotechnical Materials Science and Materials Technology, e-mail: fulleren_grafen@mail.ru |
| 5 years of the united department “Metallurgy and ma-terials processing technology” of Sukhoi State technical University of Gomel | |
| ArticleName | Influence of drawing speed on thin wire mechanical properties and microhardness |
| ArticleAuthors | Yu. L. Bobarikin, Yu. V. Martyanov, Ya. I. Radkin, I. A. Tsyrganovich |
| ArticleAuthorsData | Sukhoi State Technical University of Gomel (Gomel, Belarus): |
| ArticleName | Strength, plasticity, microhardness and inhomogeneous plastic deformation of strips made of amorphous multicomponent iron-based alloys |
| ArticleAuthors | M. N. Vereshchagin, V. G. Shepelevich, O. M. Ostrikov |
| ArticleAuthorsData | Sukhoi State Technical University of Gomel (Gomel, Belarus): M. N. Vereshchagin, Dr. Eng., Professor, Dept. of Metallurgy and Materials Processing Technology
Belarusian State University (Minsk, Belarus): V. G. Shepelevich, Dr. Phys.-Math., Professor, Dept. of Solid State Physics |
| ArticleName | Effect of speed parameters of reduction on the resulting pipe profile accuracy |
| ArticleAuthors | Yu. L. Bobarikin, Ya. I. Radkin, Yu. V. Martyanov, A. V. Strelchenko |
| ArticleAuthorsData | Sukhoi State Technical University of Gomel (Gomel, Belarus): Yu. L. Bobarikin, Cand. Eng., Associate Prof., Head of the Dept. of Metallurgy and Materials Processing Technology, e-mail: bobarikin@tut.by
Byelorussian Steel Works - Management company of the “Byelorussian Metallurgical Company” holding (Zhlobin, Belarus): |
| ArticleName | Modification of metallic dispersions during high energy processing |
| ArticleAuthors | M. N. Vereshchagin, S. N. Tselueva, M. Yu. Tseluev |
| ArticleAuthorsData | Sukhoi State Technical University of Gomel (Gomel, Belarus): M. N. Vereshchagin, Dr. Eng., Professor, Dept. of Metallurgy and Materials Processing Technology |
| ArticleName | Modernization of the Hunter method for testing steel cord in accordance with the operating conditions of a car tire |
| ArticleAuthors | Yu. L. Bobarikin, Yu. V. Martyanov, A. V. Vedeneev, A. V. Khotko |
| ArticleAuthorsData | Sukhoi State Technical University of Gomel (Gomel, Belarus): Yu. L. Bobarikin, Cand. Eng., Associate Prof., Head of the Dept. of Metallurgy and Materials Processing Technology, e-mail: bobarikin@tut.by
Byelorussian Steel Works - Management company of the "Byelorussian Metallurgical Company" holding (Zhlobin, Belarus):
JSC Belshina (Bobruisk, Belarus): |
| Rolling and other Metal forming processes | |
| ArticleName | The effect of compaction on the stress-strain state of prestressing strands |
| ArticleAuthors | A. G. Korchunov, E. M. Medvedeva, V. A. Kharitonov, D. V. Konstantinov |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): A. G. Korchunov, Dr. Eng., Professor, Vice-Rector on International Affairs, e-mail: international@magtu.ru |
| ArticleName | Justification of strip tension in the cold rolling mill digital twin |
| ArticleAuthors | M. I. Rumyantsev, A. N. Zavalishchin, A. N. Kolybanov, O. N. Esipova |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): M. I. Rumyantsev, Dr. Eng., Professor, Dept. of Materials Processing Technologies, e-mail: mikhail.rumyantsev54@bk.ru |
| ArticleName | Features of structure and mechanical properties formation in shaped rolled products made of 09G2S steel in accelerated water cooling process |
| ArticleAuthors | A. B. Sychkov, A. B. Moller, G. Ya. Atangulova, G. V. Agutin |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): |
| Power engineering, Ecology and Recycling | |
| ArticleName | New methods of electricity generation using steam from waste heat boilers fired by waste gases from high-temperature plants in ferrous metallurgy |
| ArticleAuthors | V. S. Dubinin, T. A. Stepanova, S. O. Shkarupa, V. P. Krupskiy |
| ArticleAuthorsData | National Research University «Moscow Power Engineering Institute» (Moscow, Russia): V. S. Dubinin, Cand. Eng., Associate Prof., e-mail: promteploenergetika@rambler.ru
Leonov Moscow Region University of Technology (Korolev, Russia):
Ekokuber Ltd. (Leskovka, Minsk region, Belarus): |
| ArticleName | Technique for modeling random disturbances of the electric arcs lengths for tuning a nonlinear P-controller of impedance |
| ArticleAuthors | A. A. Nikolaev, P. G. Tulupov |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University (Magnitogorsk, Russia): A. A. Nikolaev, Cand. Eng., Professor, Head of Dept. of Automated Electric Drive and Mechatronics, e-mail: aa.nikolaev@magtu.ru |
| ArticleName | Man-made metal-containing waste of I-II class — raw materials for obtaining new products and materials |
| ArticleAuthors | V. A. Kolesnikov, V. A. Brodskiy, D. Yu. Zhukov, A. V. Kolesnikov |
| ArticleAuthorsData | Mendeleev University of Chemical Technology of Russia (Moscow, Russia): V. A. Kolesnikov, Dr. Eng., Prof., Head of Dept. of Technology of Inorganic Substances and Electrochemical Processes, e-mail: Kolesnikov-tnv-i-ep@yandex.ru |
