Chernye Metally
The "Chernye Metally" journal No. 6-2022 was published, which is mainly devoted to rolling, pipe production and other metal forming processes.
The issue is headed with an article by the authors of the Novolipetsk Iron and Steel Works, devoted to the study of increasing the strength of sinter by reducing the -0.5 mm fraction in the composition of solid sintering fuel.
The "Steel production" section considers the influence of the gap between the rolls on parameters of roll briquetting of metallurgical lime and oxide.
The “Rolling and other metal forming processes” section presents articles on research in the field of hot rolling carried out by scientists from the Lipetsk and Magnitogorsk State Technical Universities. Of particular interest are the works performed at NLMK DanSteel during the development of the technology of thermomechanical rolling of thick plate bridge steels.
Article of specialists from the Kaluga branch of the Bauman Moscow State Technical University talks about the study of the accuracy of forgings during upsetting and closed stamping, taking into account the used forging and pressing equipment.
The work of the employees of the Naberezhnye Chelny Institute (branch) of the Kazan Federal University is devoted to the production of forgings for the crankshaft of a heavy-duty vehicle.
The "Pipe Production" section tells about the research carried out at NUST "MISiS" and JSC "RusNITI" on the problems of screw piercing and the production of pipes from high-strength steels, respectively.
In the same issue, articles were published in the "Metallurgy and Metallography" and "Engineering Technologies" sections, as well as a selection of memoirs about the rector and president of MISiS Yu. S. Karabasov.
Please find more details below, or order your printed or electronic version of the Journal.
Novolipetsk Steel Company (NLMK), Lipetsk, Russia:
T. V. Prokhorova, Engineer, Technology Development Department, e-mail: prohorova_tv@nlmk.com
D. A. Neugodov, Engineer, Technology Development Department
E. A. Milokhin, Head of the Iron Production Technologies Group, Technology Development Department
O. A. Semenov, Head of the Sintering Shop
Institute of Engineering Sciences (IMASH) named after E. S. Gorkunov, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia:
N. A. Babailov, Cand. Eng., Senior Researcher, Laboratory of Applied Mechanics, e-mail: n.a.babailov@urfu.ru
Ural Federal University named after the first President of Russia B.N. Eltsin, Ekaterinburg, Russia:
Yu. N. Loginov, Dr. Eng., Professor, Dept. of Metal Forming
CJSC Spaydermash, Ekaterinburg, Russia:
L. I. Polyansky, Director
Lipetsk State Technical University, Lipetsk, Russia:
S. M. Belskiy, Dr. Eng., Professor, Dept. of Metal Forming, e-mail: belsky-55@yandex.ru
I. I. Shopin, Cand. Eng., Associate Professor
I. P. Mazur, Dr. Eng., Professor, Head of the Dept. of Metal Forming
M. A. Dagman, Postgraduate Student
NLMK DanSteel A/S, Frederiksvärk, Denmark:
E. A. Goli-Oglu, Cand. Eng., Chief Technologist, e-mail: EGoli-Oglu@yandex.com
A. N. Filatov, Metal Science Engineer
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:
A. B. Moller, Dr. Eng., Professor, Head of the Dept. of Metal Processing Technology, e-mail: a.moller@magtu.ru
O. N. Tulupov, Dr. Eng., Professor, Dept. of Metal Processing Technology
S. A. Levandovsky, Cand. Eng., Associate Professor, Dept. of Metal Processing Technology
D. F. Tselikanov, Postgraduate Student, Dept. of Metal Processing Technology
S. Yu. Tverskoy, JSC Magnitogorsk Gipromez, took part in the work.
Kaluga Branch of Bauman Moscow State Technical University, Kaluga, Russia:
S. V. Matveev, Cand. Eng., Associate Professor, Dept. M1-KF "Machine-Building Technologies", e-mail: s.matveev@alarmtrade.ru
A. G. Vyatkin, Cand. Eng., Associate Professor, Dept. M1-KF "Machine-Building Technologies"
I. A. Kh. Davi, Student, Dept. M1-KF "Machine-building technologies"
Kaluga Technical College, Kaluga, Russia:
A. A. Vyatkin, Lecturer
Naberezhnye Chelny Institute (branch) of Kazan Federal University, Naberezhnye Chelny, Russia:
D. T. Safarov, Cand. Eng., Associate Professor, Dept. of Materials, Technologies and Quality, e-mail.: Safarov-dt@mail.ru
A. G. Kondrashov, Cand. Eng., Associate Professor, Dept. of Design and Technological Support of Machine-Building Industries, e-mail: kondrashovag@mail.ru
PJSC KamAZ, Naberezhnye Chelny, Russia:
A. V. Chekh, Director of the Forging plant, e-mail: ChehAV@kamaz.ru
Russian Research Institute of the Tube & Pipe Industries (RusNITI), Chelyabinsk, Russia:
Ya. I. Kosmatsky, Dr. Eng., Deputy General Director on Scientific Work, e-mail: kosmatski@rosniti.ru
N. V. Fokin, Researcher, e-mail: fokin@rosniti.ru
B. V. Barichko, Cand. Eng., e-mail: barichko@rosniti.ru
National University of Science and Technology “MISiS”, Moscow, Russia:
S. M. Kriskovich, Senior Researcher, Dept. of Metal Forming, e-mail: moose2@yandex.ru
V. P. Romanenko, Cand. Eng., Professor, Dept. of Metal Forming, e-mail: romanenko.vp@misis.ru
N. M. Vavilkin, Dr. Eng., Professor, Dept. of Metal Forming
Vyksa Branch of the National University of Science and Technology “MISIS”, Vyksa, Russia:
A. N. Fortunatov, Associate Professor
Tiksomet Ltd., St. Petersburg, Russia:
A. A. Kazakov, Dr. Eng., Professor, Head of the Laboratory for Metallurgical Expertise, e-mail: kazakov@thixomet.ru
JSC Vyksa Metallurgical Plant, Vyksa, Russia:
V. A. Murysev, Chief Specialist of the Engineering and Technology Center
I. V. Rybalchenko, Head of the Laboratory of Metal Science and Heat Treatment of metals (MiTOM), Central Plant Laboratory
P. P. Stepanov, Cand. Eng., Director of the Engineering and Technology Center
Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia1 ; Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia2:
E. V. Lopatina, Postgraduate Student, Engineer of the Scientific and Technical Center, e-mail: lopatina.yekaterina2016@yandex.ru
Saint Petesburg Mining University, Saint Petrsburg, Russia:
V. V. Maksarov, Dr. Eng., Professor, Dean of the Faculty of Mechanical Engineering, Head of the Dept. of Mechanical Engineering, e-mail: maks78.54@mail.ru
I. V. Gorshkov, Postgraduate Student, Dept. of Mechanical Engineering, e-mail: gorshkov.ilya.94@gmail.com
A. D. Khalimonenko, Cand. Eng., Associate Professor, Dept. of Mechanical Engineering, e-mail: Khalimonenko_AD@pers.spmi.ru