Chernye Metally
The "Chernye Metally" journal No. 6-2022 was published, which is mainly devoted to rolling, pipe production and other metal forming processes.
The issue is headed with an article by the authors of the Novolipetsk Iron and Steel Works, devoted to the study of increasing the strength of sinter by reducing the -0.5 mm fraction in the composition of solid sintering fuel.
The "Steel production" section considers the influence of the gap between the rolls on parameters of roll briquetting of metallurgical lime and oxide.
The “Rolling and other metal forming processes” section presents articles on research in the field of hot rolling carried out by scientists from the Lipetsk and Magnitogorsk State Technical Universities. Of particular interest are the works performed at NLMK DanSteel during the development of the technology of thermomechanical rolling of thick plate bridge steels.
Article of specialists from the Kaluga branch of the Bauman Moscow State Technical University talks about the study of the accuracy of forgings during upsetting and closed stamping, taking into account the used forging and pressing equipment.
The work of the employees of the Naberezhnye Chelny Institute (branch) of the Kazan Federal University is devoted to the production of forgings for the crankshaft of a heavy-duty vehicle.
The "Pipe Production" section tells about the research carried out at NUST "MISiS" and JSC "RusNITI" on the problems of screw piercing and the production of pipes from high-strength steels, respectively.
In the same issue, articles were published in the "Metallurgy and Metallography" and "Engineering Technologies" sections, as well as a selection of memoirs about the rector and president of MISiS Yu. S. Karabasov.
Please find more details below, or order your printed or electronic version of the Journal.
| Agglomeration | |
| ArticleName | The influence of the –0.5 mm fraction content in solid fuel on the performance of the agglomeration process in the conditions of PJSC "NLMK" |
| ArticleAuthors | T. V. Prokhorova, D. A. Neugodov, E. A. Milokhin, O. A. Semenov |
| ArticleAuthorsData | Novolipetsk Steel Company (NLMK), Lipetsk, Russia: T. V. Prokhorova, Engineer, Technology Development Department, e-mail: prohorova_tv@nlmk.com |
| Steel production | |
| ArticleName | Influence of the gap between the rolls on parameters of the roll briquetting of metallurgical lime and magnesium oxide |
| ArticleAuthors | N. A. Babailov, Yu. N. Loginov, L. I. Polyansky |
| ArticleAuthorsData | Institute of Engineering Sciences (IMASH) named after E. S. Gorkunov, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia: N. A. Babailov, Cand. Eng., Senior Researcher, Laboratory of Applied Mechanics, e-mail: n.a.babailov@urfu.ru Ural Federal University named after the first President of Russia B.N. Eltsin, Ekaterinburg, Russia: CJSC Spaydermash, Ekaterinburg, Russia: |
| Rolling and other OMD processes | |
| ArticleName | Edge drop of GO steel strips at the hot rolling mill 2000 PJSC «NLMK» |
| ArticleAuthors | S. M. Belskiy, I. I. Shopin, I. P. Mazur, M. A. Dagman |
| ArticleAuthorsData | Lipetsk State Technical University, Lipetsk, Russia: S. M. Belskiy, Dr. Eng., Professor, Dept. of Metal Forming, e-mail: belsky-55@yandex.ru |
| ArticleName | Thermomechanical rolling of heavy plates with 100 mm thickness, from highstrength bridge steels S460K2W and S460J5W with improved atmospheric corrosion resistance |
| ArticleAuthors | E. A. Goli-Oglu, A. N. Filatov |
| ArticleAuthorsData | NLMK DanSteel A/S, Frederiksvärk, Denmark: |
| ArticleName | Improvement of the line for accelerated cooling of wire rod using a digital process model |
| ArticleAuthors | A. B. Moller, O. N. Tulupov, S. A. Levandovsky, D. F. Tselikanov |
| ArticleAuthorsData | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: A. B. Moller, Dr. Eng., Professor, Head of the Dept. of Metal Processing Technology, e-mail: a.moller@magtu.ru |
| ArticleName | Theoretical study of the accuracy of the height dimensions of forgings for upsetting and closed forging operations, taking into account the choice of forging and pressing equipment |
| ArticleAuthors | S. V. Matveev, A. G. Vyatkin, A. A. Vyatkin, I. A. Kh. Davi |
| ArticleAuthorsData | Kaluga Branch of Bauman Moscow State Technical University, Kaluga, Russia: S. V. Matveev, Cand. Eng., Associate Professor, Dept. M1-KF "Machine-Building Technologies", e-mail: s.matveev@alarmtrade.ru A. G. Vyatkin, Cand. Eng., Associate Professor, Dept. M1-KF "Machine-Building Technologies" Kaluga Technical College, Kaluga, Russia: A. A. Vyatkin, Lecturer |
| ArticleName | Provision of allowance for the root and connecting rod necks and balancing of the forgings of the crankshaft of a heavy-duty vehicle |
| ArticleAuthors | D. T. Safarov, A. V. Chekh, A. G. Kondrashov |
| ArticleAuthorsData | Naberezhnye Chelny Institute (branch) of Kazan Federal University, Naberezhnye Chelny, Russia: D. T. Safarov, Cand. Eng., Associate Professor, Dept. of Materials, Technologies and Quality, e-mail.: Safarov-dt@mail.ru A. G. Kondrashov, Cand. Eng., Associate Professor, Dept. of Design and Technological Support of Machine-Building Industries, e-mail: kondrashovag@mail.ru
PJSC KamAZ, Naberezhnye Chelny, Russia: |
| Pipe production | |
| ArticleName | Study of plasticity and deformation resistance of 13Cr type steel used for manufacturing pipes of high strength grades |
| ArticleAuthors | Ya. I. Kosmatsky, N. V. Fokin, B. V. Barichko |
| ArticleAuthorsData | Russian Research Institute of the Tube & Pipe Industries (RusNITI), Chelyabinsk, Russia: |
| ArticleName | Features of the stress-strain state of screw piercing of extra-thick-walled hollow billets for mechanical engineering |
| ArticleAuthors | S. M. Kriskovich, V. P. Romanenko, N. M. Vavilkin, A.N. Fortunatov |
| ArticleAuthorsData | National University of Science and Technology “MISiS”, Moscow, Russia:
Vyksa Branch of the National University of Science and Technology “MISIS”, Vyksa, Russia: |
| Metallology and metallography | |
| ArticleName | Non-metallic inclusions and quality of pipe joints obtained by high-frequency electric resistance welding |
| ArticleAuthors | A. A. Kazakov, V. A. Murysev, I. V. Rybalchenko, P. P. Stepanov |
| ArticleAuthorsData | Tiksomet Ltd., St. Petersburg, Russia:
JSC Vyksa Metallurgical Plant, Vyksa, Russia: |
| ArticleName | Improvement of the methods of sample preparation for metallographic analysis in the conditions of the central laboratory of PJSC MMK |
| ArticleAuthor | E. V. Lopatina |
| ArticleAuthorData | Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia1 ; Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia2: E. V. Lopatina, Postgraduate Student, Engineer of the Scientific and Technical Center, e-mail: lopatina.yekaterina2016@yandex.ru |
| Mechanical engineering technologies | |
| ArticleName | Improvement of the performance of a multi-blade tool based on selective equipment with cutting ceramics |
| ArticleAuthors | V. V. Maksarov, I. V. Gorshkov, A. D. Khalimonenko |
| ArticleAuthorsData | Saint Petesburg Mining University, Saint Petrsburg, Russia: V. V. Maksarov, Dr. Eng., Professor, Dean of the Faculty of Mechanical Engineering, Head of the Dept. of Mechanical Engineering, e-mail: maks78.54@mail.ru |
