Chernye Metally
The "Chernye Metally" journal No. 8-2022 has been published.
The issue is headed with a greeting from the first vice-rector of the Volgograd State Technical University S. V. Kuzmin. This year, within the walls of the university, the chair for Materials Science and Composite Materials celebrated its 90th anniversary. The anniversary selection of publications presents historical information about the chair, as well as the latest developments in the field of structures and properties of aluminized alloys, a five-layer composite material consisting of 3 layers of titanium coating and 2 layers of corrosion-resistant steel. Also, the specialists of the chair carried out computer simulation of deformation processes of the optical cable of the lightning wire, which provides protection for overhead power lines against lightning strikes and at the same time organizes fiber-optic communication lines.
The issue presents traditional sections devoted to scientific developments in the field of production of iron, steel, pipes, as well as metallurgy and metallography.
In the "Rolling and other metal forming processes" section four works of specialists from Lipetsk, Yekaterinburg, Magnitogorsk and Naberezhnye Chelny are published. These articles touch upon the issues of product quality control of a sheet-rolling shop, the influence of the feed angle on parameters of the helical rolling process, deformation specifics of 40KhN2MA steel in the initial and heat-treated states, as well as the analysis of tolerance parameters on the workpiece elements being processed, ensuring the efficiency and accuracy of machining workpieces of machine parts.
Noteworthy is the article in the “Refractory” section about zirconium refractory materials, a relatively new type of high-tech ceramic product.
Of particular interest to readers will be the publication in the economic section, dedicated to modern trends in the development of production technologies in the ferrous metallurgy of the Asian part of Russia.
Please find more details below, or order your printed or electronic version of the Journal
| Production of cast iron | |
| Название | Analytical assessment of the behavior of biochar, as an additionally injected fuel, under conditions of blast-furnace smelting |
| Авторы | V. N. Titov, A. V. Karpov, R. I. Khopersky |
| Информация об авторах | Novolipetsk Steel Company (NLMK), Lipetsk, Russia: V. N. Titov, Cand. Eng., Associate Prof., Chief Specialist in Ore-Thermal Processes Optimization, Technology Development Dept.
Lipetsk State Technical University, Lipetsk, Russia: |
| Steel production | |
| Название | Optimal ratio of hydrogen and carbon in steel, providing a minimum level of steel sorting at a metallurgical plant |
| Авторы | S. V. Podkur, G. I. Kotelnikov, D. V. Karavaev, S. A. Botnikov |
| Информация об авторах | National University of Science and Technology “MISiS”, Moscow, Russia: S. V. Podkur, Postgraduate Student, Dept. of Steel Metallurgy, New Production Technologies and Metal Protection |
| Refractories | |
| Название | The potential of the Russian raw material base of zirconium for production of ZrO2-based refractory materials |
| Авторы | D. V. Kharitonov, A. I. Shinkevich, T. V. Malysheva |
| Информация об авторах | ONPP “Tekhnologiya” namied after A. G. Romashin, Obninsk, Russia: D. V. Kharitonov, Dr. Eng., Deputy Director of the Research and Production Complex for Production Activities – Head of Workshop
Kazan National Research Technological University, Kazan, Russia: |
| Rolling and other OMD processes | |
| Название | Features of product quality management of the sheet rolling shop in the production stream |
| Авторы | A. I. Bozhkov, D. A. Kovalev, S. S. Degtev, R. I. Shulgin |
| Информация об авторах | Lipetsk State Technical University, Lipetsk, Russia: A. I. Bozhkov, Cand. Eng., Prof., Dept. of Metal Forming, e-mail: bozhkov_51@mail.ru
Novolipetsk Steel Company (NLMK), Lipetsk, Russia:
Lipetsk State Technical University, Lipetsk, Russia1 ; Novolipetsk Steel Company (NLMK), Lipetsk, Russia2: |
| Название | Investigation of parameters of the stressed and deformed state in the process of screw rolling on a three-roll mill |
| Авторы | D. A. Pavlov, M. V. Erpalov |
| Информация об авторах | Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia: D. A. Pavlov, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: d.a.pavlov@urfu.ru |
| Название | Investigation of plastic deformation resistance of billets made of 40KhN2MA steel |
| Авторы | I. Yu. Mezin, A. S. Limarev, E. G. Kasatkina, I. V. Ponurko |
| Информация об авторах | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: I. Yu. Mezin, Dr. Eng., Head of the Dept. of Technology, Certification and Car Service, e-mail: meziniy1@mail.ru |
| Название | Method for calculating the optimal parameters for adjusting stamping equipment to ensure the geometric accuracy of heavy-duty vehicle crankshaft forgings |
| Авторы | D. T. Safarov, A. V. Chekh, A. G. Kondrashev |
| Информация об авторах | Naberezhnye Chelny Institute (branch) of Kazan Federal University, Naberezhnye Chelny, Russia: A. G. Kondrashov, Cand. Eng., Associate Prof., Dept. of Design and Technological Support of Machine-Building Industries, e-mail: kondrashovag@mail.ru
KAMAZ PJSC, Naberezhnye Chelny, Russia. |
| 90 years of the Department of Materials Science and Composite Materials of Volgograd State Technical University | |
| Название | Structure and properties of aluminized alloys of the Fe–Cr–Al system |
| Авторы | V. G. Shmorgun, V. P. Kulevich, A. I. Bogdanov |
| Информация об авторах | Volgograd State Technical University, Volgograd, Russia: |
| Название | Investigation of the structure and properties of a fivelayer titanium-steel explosion-welded composite material after technological stages |
| Авторы | L. M. Gurevich, V. N. Arisova, A. F. Trudov, V. O. Kharlamov |
| Информация об авторах | Volgograd State Technical University, Volgograd, Russia: L. M. Gurevich, Dr. Eng., Associate Prof., Head of the Dept. of Materials Science and Composite Materials e-mail: mv@vstu.ru |
| Название | Computer simulation of circular plastic compression of a lightning protection cable with an optical module |
| Авторы | L. M. Gurevich, V. F. Danenko |
| Информация об авторах | Volgograd State Technical University, Volgograd, Russia: L. M. Gurevich, Dr. Eng., Associate Prof., Head of the Dept. of Materials Science and Composite Materials, e-mail: mv@vstu.ru |
| Pipe production | |
| Название | Four-point elastic-plastic bend of steel sheet on the step-by-step tube-forming press |
| Автор | V. N. Shinkin |
| Информация об авторе | National University of Science and Technology “MISIS” (Moscow, Russia): V. N. Shinkin, Dr. Phys.-Math., Prof., Dept. of Physics, e-mail: shinkin-korolev@yandex.ru |
| Metallology and metallography | |
| Название | Predicting the properties of structural steels based on automated calculations of experimental results |
| Авторы | V. I. Astashchenko, G. F. Mukhametzyanova, I. R. Mukhametzyanov, T. V. Shveeva |
| Информация об авторах | Naberezhnye Chelny Institute, Kazan (Privolzhkiy) Federal University, Naberezhnye Chelny, Russia
KAMAZ PTC, Naberezhnye Chelny, Russia: T. V. Shveeva, Leading Engineer |
| Economy | |
| Название | Technological trends and directions of development of ferrous metallurgy in Asian Russia |
| Автор | S. P. Petrov |
| Информация об авторе | Institute of Economics and Industrial Engineering, Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia: |
