Chernye Metally
The "Chernye Metally" journal No. 10-2022 has been published, which is mainly dedicated to the 50th anniversary of the chair for Metallurgical Technologies of the Nizhny Tagil Technological Institute (branch) of UrFU. The section contains joint research by scientists from the institute and specialists from the Nizhny Tagil Iron and Steel Works. The presented publications cover the issues of obtaining naturally alloyed steel in the process of reduction melting without carburization, using of steel converter slag in the iron flux charge during iron smelting in order to reduce CO2 emissions, changing in the design of the RH degasser inlet pipe in order to increase the thickness of the refractory lining, as well as mastering the production of large-sized I-beams in the conditions of EVRAZ "NTMK".
In the section “Preparation of Raw Materials”, specialists from St. Petersburg Mining University reviewed the process of production of semi-coke from oil shale of the Leningrad deposit.
In the publication of the section "Foundry", scientists from the Volgograd State Technical University studied the effect of adding pyrolytic carbon to the sand-liquid-glass mixture in order to improve the knock-out of casting molds when producing castings from steel and cast iron.
The section "Metal science and physics of metals" is noteworthy. Specialists from Nosov MSTU informed about the features of the formation of the 08Yu steel structure during asymmetric rolling. Also in the section is a publication on application of the computer simulation method in order to select the optimal chemical composition in a given range of impact strength values, and an article on the study of the microstructure and mechanical properties of welded joints with a thickness of 122 mm from thick steel.
In the section "Ecology", the works of specialists on the introduction of a boundary carbon correction mechanism and its impact on the metallurgical industry, as well as on the use of atomic emission spectroscopy to determine the chemical composition of steelmaking wastes are published.
The issue also presents publications in traditional sections "Rolling and other metal forming processes", "Organization of production and economics", "Power Engineering" and "Machine-building technologies".
Please find more details below, or order your printed or electronic version of the Journal.
St. Petersburg Mining University, St. Petersburg, Russia:
M. Yu. Nazarenko, Cand. Eng., Associate Prof., Dept. of Chemical Technologies and Energy Recycling, e-mail: nazarenko_myu@pers.spmi.ru
S. N. Saltykova, Cand. Eng., Associate Prof., Dept. of Chemical Technologies and Energy Recycling, e-mail: saltykova_sn@pers.spmi.ru
Nizhny Tagil Technological Institute (branch) of the Ural Federal University named after the first President of Russia B. N. Yeltsin, Nizhny Tagil, Russia:
K. B. Pykhteeva, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: pyhkb@mail.ru
JSC EVRAZ NTMK, Nizhny Tagil, Russia1 ; Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia2:
M. V. Polovets, Process Engineer1, Postgraduate Student, Dept. of Metallurgy of Iron and Alloys2, e-mail: mvpolovets@urfu.ru
JSC EVRAZ NTMK, Nizhny Tagil, Russia:
K. V. Mironov, Head of Blast Furnace Shop
A. A. Forshev, Deputy Head of Technical Department
Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia:
S. A. Zagainov, Dr. Eng., Prof., Dept. of Metallurgy of Iron and Alloys, e-mail: zagainovski@mail.ru
Nizhny Tagil Technological Institute (branch) of the Ural Federal University named after the first President of Russia B. N. Yeltsin, Nizhny Tagil, Russia:
A. A. Metelkin, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies, e-mail: anatoliy82@list.tu
O. I. Shevchenko, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgical Technologies, e-mail: Shevchenko_oleg@mail.ru
Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia1 ; Institute of Metallurgy, Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia2:
O. Yu. Sheshukov, Dr. Eng., Prof., Director of the Institute of New Materials and Technologies1, Chief Researcher, Laboratory of Powder, Composite and Nano-Materials2, e-mail: o.j.sheshukov@urfu.ru
JSC EVRAZ NTMK, Nizhny Tagil, Russia:
A. S. Tkachev, Chief Specialist of the Development of Steel Ladle Treatment, Converter Shop No. 1, e-mail: Andrey.Tkachev@evraz.com
D. E. Manzor, Chief Specialist of the Refractory Operation Division of the Technical Dept., e-mail: Dmitriy.Manzor@evraz.com
Circulating vacuum degasser, increased durability of lining, inlet snorkel. I. V. Kovyazin, A. V. Chiglintsev, V. Yu. Elin, D. V. Sushnikov took part in the work.
JSC EVRAZ-NTMK, Nizhny Tagil, Russia:
D. A. Poluektov, Process Engineer, Wide Flanged Beam Rolling Shop, e-mail: Dr.saers@gmail.com
V. Yu. Rubtsov, Cand. Eng., Chief Specialist for Rail Production, e-mail: Uriylot@mail.ru
Nizhniy Tagil Technological Institute (branch) of the Ural Federal University named after the first President of Russia B. N. Yeltsin, Nizhny Tagil, Russia:
O. I. Shevchenko, Dr. Eng., Associate Prof., Head of the Dept. of Metallurgical Technologies, e-mail: oleg.shevchenko@urfu.ru
M. V. Mironova, Cand. Eng., Associate Prof., Deputy Director
Volgograd State Technical University, Volgograd, Russia:
N. A. Kidalov, Dr. Eng., Prof., Head of the Dept. of Machinery and Technology of Foundry
N. V. Grigoryeva, Lecturer of the Dept. of Machinery and Technology of Foundry
A. A. Belov, Cand. Eng., Lecturer of the Dept. of Machinery and Technology of Foundry, e-mail: aa-belov@bk.ru
N. I. Gabelchenko, Cand. Eng., Associate Prof. of the Dept. of Machinery and Technology of Foundry
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:
N. V. Koptseva, Dr. Eng., Prof.
Yu. Yu. Efimova, Cand. Eng., Associate Professor, e-mail: jefimova78@mail.ru
A. M. Pesin, Dr. Eng., Prof.
M. V. Chukin, Dr. Eng., Prof.
Engineering Construction Maintenance Ltd., Achinsk, Russia:
S. L. Arapov, Chief Metallurgist, e-mail: arapovsl@yandex.ru
Siberian Federal University, Krasnoyarsk, Russia:
S. V. Belyaev, Dr. Eng., Prof., e-mail: 244812@mail.ru
A. A. Kosovich, Cand. Eng., Senior Researcher, e-mail: akosovich@sfu-kras.ru
E. G. Partyko, Junior Researcher, e-mail: elforion@mail.ru
NLMK DanSteel, Frederiksverk, Denmark:
E. A. Goli-Oglu, Cand. Eng., Chief Technologist, e-mail: Egoli-Oglu@yandex.com
A. N. Filatov, Metallurgical Engineer
South Ural State University, Chelyabinsk, Russia:
I. I. Prosvirina, Dr. Econ., Prof., Dept. of Economics and Finance
JSC RusNITI, Chelyabinsk, Russia:
Ya. I. Kosmatsky, Dr. Eng., Deputy General Director for Research, e-mail: kosmatski@rosniti.ru
D. N. Lysov, Head of Economic Research Dept.
South Ural State University, Chelyabinsk, Russia1 ; JSC RusNITI, Chelyabinsk, Russia2:
E. N. Kondratiev, Postgraduate Student, Dept. of Economics and Finance1, Junior Researcher, Economic Research Dept.2, e-mail: kondratjev@rosniti.ru
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:
A. A. Nikolaev, Cand. Eng., Associate Prof., Head of the Dept. of Automatic Electric Drive and mechatronics, e-mail: aa.nikolaev@magtu.ru
P. G. Tulupov, Cand. Eng., Junior Researcher, Dept. of Automatic Electric Drive and mechatronics, e-mail: tulupov.pg@mail.ru
S. S. Ryzhevol, Postgraduate Student, Dept. of Automatic Electric Drive and mechatronics, e-mail: snaffls18@gmail.com
Financial University under the Government of the Russian Federation, Moscow, Russia1 ; Institute of Europe, RAS, Moscow, Russia2:
S. A. Roginko, Head of the Center for Ecology and Development1, Professor2, e-mail: roginko@bk.ru
Mendeleev University of Chemical Technology of Russia, Moscow, Russia:
E. N. Kuzin, Cand. Eng., Associate Prof., Dept. of Industrial Ecology, e-mail: Kuzin.e.n@muctr.ru
Tula State University, Tula, Russia:
A. A. Pasynkov, Cand. Eng., Associate Prof.
S. S. Yakovlev, Postgraduate Student, e-mail: yakovlev-ss-science@yandex.ru
A. I. Gasanov, Master’s Student