Chernye Metally
The journal "Chernye Metally" No. 12-2022 has been published. This issue presents an insert dedicated to the 55th anniversary of the chair for Materials Science and Technology of Materials of the Orenburg State University. The staff of the chair told about the history of its creation, as well as the main directions of research and development in the field of heat treatment, welding and other issues of materials science.
In the section “Ore dressing”, an article by A.E. Pelevin about the possibility of using a two-stage grinding scheme instead of a three-stage one by using fine screening in the second grinding stage for titanomagnetite ore is presented.
A team of authors from Nosov MSTU published studies on the development of technological parameters for the production of sinter from titanium-magnetite ores of the Suroyam deposit in the Chelyabinsk region (section "Sintering") and the possibility of reducing iron with additional hydrogen in the conditions of blast-furnace production at MMK (section "Iron production").
In the section "Rolling and metallurgy", specialists of the Bauman Moscow State Technical University and MMK presented a method for developing a technology for the production of hot-rolled coils in the conditions of existing production, the technology and characteristics of which go beyond the nameplate data of the equipment. Also in this section, the authors from NRNU MEPhI published studies on the properties of alloys of the Fe - Cr - Al - Si system used as fuel rod cladding material.
The section "Coating and corrosion protection" is noteworthy, which presents an overview of zinc melt alloying systems for hot dip galvanizing, as well as a study of protective coatings based on chromium formed by friction cladding (authors - O.S. Bondareva and O.S. Dobychin).
The reader will also be interested in the traditional section "History of Metallurgy", which tells about the history of the development and creation of heterogeneous tank armor by Soviet metallurgical engineers of the Izhora and Mariupol metallurgical plants.
Please find more details below, or order your printed or electronic version of the Journal.
Ural State Mining University, Ekaterinburg, Russia:
A. E. Pelevin, Dr. Eng., Associate Professor, Prof. of the Dept. of Mineral Processing, e-mail: a-pelevin@yandex.ru
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:
A. S. Kharchenko, Dr. Eng., Associate Professor, Head of the Dept. of Metallurgy and Chemical Technology (MChT), e-mail: as.mgtu@mail.ru
S. K. Sibagatullin, Dr. Eng., Prof., Dept. of MChT
V. I. Sysoev, Postgraduate Student of MChT
S. V. Oskolkov, Senior Lecturer, Dept. of Heat Engineering and Energy Systems
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:
A. S. Kharchenko, Dr. Eng., Associate Professor, Head of the Dept. of Metallurgy and Chemical Technology (MChT), e-mail: as.mgtu@mail.ru
M. I. Sibagatullina, Postgraduate Dtudent, Dept. of MChT
D. M. Chukin, Cand. Eng., Senior Researcher, Research Sector
V. A. Bigeev, Dr. Eng., Prof., Dept. of MChT
Volgograd State Technical University, Volgograd, Russia:
N. A. Kidalov, Dr. Eng., Prof., Head of the Dept. of Machinery and Technology of Foundry (MTF)
N. V. Belova, Lecturer, Dept. of MTF
A. A. Belov, Cand. Eng., Lecturer, Dept. of MTF, e-mail: aa-belov@bk.ru
A. S. Adamova, Cand. Eng., Associate Prof., Dept. of MTF
Orenburg State University, Orenburg, Russia:
S. E. Krylova, Dr. Eng., Prof., Dept. of Materials Science and Technology, e-mail: krilova27@yandex.ru
A. Yu. Plesovskikh, Postgraduate student, Aerospace Institute
I. A. Kurnoskin, Postgraduate student, Aerospace Institute
I. Sh. Tavtilov, Cand. Eng., Associate Prof., Dept. of Materials Science and Technology
Orenburg State University, Orenburg, Russia:
V. S. Repyakh, Cand. Eng., Associate Prof., Dept. of Materials Science and Technology (MS&T), e-mail: podval2004@mail.ru
V. M. Kushnarenko, Dr. Eng., Prof., Dept. of MS&T, e-mail: vmkushnarenko@mail.ru
V. I. Yurshev, Cand. Eng., Associate Prof., Head of the Dept. of MS&T, e-mail: yvi170858@rambler.ru
ESTM Ltd, Tula, Russia:
A. A. Kirichenko, Quality Director, e-mail: a.kirichenko@estm-tula.com
Orenburg State University, Orenburg, Russia1 ; JSC Drilling Equipment Plant, Orenburg, Russia2:
E. A. Kuzmina, Postgraduate Student1, Head of the Technical Department2, e-mail: kuzmina0902@yandex.ru
E. Yu. Priymak, Cand. Eng., Associate Prof., Dept. of Materials Science and Technology1, Head of the Laboratory of Metal Science and Heat Treatment2
Ya. S. Syomka, Postgraduate Student1, Design Engineer2
Orenburg State University, Orenburg, Russia:
A. S. Kirilenko, Cand. Eng., Senior Lecturer
Orenburg State University, Orenburg, Russia:
V. S. Repyakh, Cand. Eng., Associate Prof., Dept. of Materials Science and Technology (MS&T), e-mail: podval2004@mail.ru
V. M. Kushnarenko, Dr. Eng., Prof., Dept. of Mechanics of Materials, Structures and Machines, e-mail: vmkushnarenko@mail.ru
Yu. A. Chirkov, Dr. Eng., Prof., Dept. of Mechanics of Materials, Structures and Machines, e-mail: chirkov_ura@mail.ru
S. V. Boyko, Cand. Eng., Associate Prof., Director of Engineering Center, e-mail: boikosv61@mail.ru
Bauman Moscow State Technical University, Moscow, Russia:
I. S. Vasilyev, Leading Engineer, Research Institute of Structural Materials and Technological Processes (NII KM & TP)
P. Yu. Zhikharev, Leading Engineer, NII KM & TP, e-mail: zhikharev@bmstu.ru
A. V. Perestoronin, Cand. Eng., 2nd category engineer of the Scientific and Educational Center "Center for Additive Technologies"
PJSC Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia:
V. V. Mukhin, Cand. Eng., Leading Engineer of the Rolling Production Group of the Scientific and Technical Center
National Research Nuclear University MEPhI, Moscow, Russia:
A. B. Kruglov, Cand. Eng., Associate Professor
M. D. Savelyev, Engineer, e-mail: SavelyevMD@gmail.com
B. A. Tarasov, Cand. Eng., Senior Researcher
Samara National Research University named after Academician S.P. Korolev, Samara, Russia:
O. S. Bondareva, Cand. Eng., Associate Prof., Dept. of Metal Technology and Aviation Materials Science, e-mail: osbond@yandex.ru
O. S. Dobychyna, Postgraduate Student, Dept. of Metal Technology and Aviation Materials Science
Joint Institute of Mechanical Engineering of the National Academy of Sciences of Belarus, Minsk, Belarus:
M. A. Levantsevich, Cand. Eng., Associate Prof., Leading Researcher, Laboratory of Drive Systems and Technological Equipment
N. N. Maksimchenko, Cand Eng., Senior Researcher, Laboratory of Drive Systems and Technological Equipment
Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia1 ; Novotroitsk branch of NUST MISIS, Novotroitsk, Russia2:
R. R. Dema, Dr. Eng., Associate Prof., Dept. of Machinery and Technologies of Metal Forming and Mechanical Engineering1, Prof. of the Dept. of Metallurgical Technologies and Equipment2, e-mail: demarr78@mail.ru
Novotroitsk branch of NUST MISIS, Novotroitsk, Russia:
A. N. Shapovalov, Cand. Eng., Associate Prof., Deputy Director of the Branch for Innovation and Development
Institute of History and Archeology, Ural Branch of the Russian Academy of Sciences, Ekaterinburg, Russia:
Vas. V. Zapariy, Cand. Hist., Associate Prof., Researcher, e-mail: pantera.zap@gmail.com