Journals →  Chernye Metally →  2023 →  #1

Chernye Metally



Cast Iron Production
ArticleName Interrelation of gas blowing parameters of blast furnaces and the main quality indicators of coke in the conditions of JSC “Ural Steel”
ArticleAuthors D. R. Ganin, A. Yu. Fuks
ArticleAuthorsData

Novotroitsk branch of the National University of Science and Technology “MISiS”, Novotroitsk, Russia:

D. R. Ganin, Cand. Eng., Associate Prof., Dept. of Metallurgical Technologies and Equipment, e-mail: dmrgan@mail.ru

 

Ural Steel, Novotroitsk, Russia:
A. Yu. Fuks, Chief Specialist for Sintering and Blast Furnace Production, Technical Directorate

Rolling and Metal Science
ArticleName Development of technology for production of new materials on traditional wide-strip hot rolling mills using modern methods of numerical and physical modeling. Part 2
ArticleAuthors I. S. Vasilyev, P. Yu. Zhikharev, A. V. Perestoronin, V. V. Mukhin
ArticleAuthorsData

Bauman Moscow State Technical University, Moscow, Russia:
I. S. Vasilyev, Leading Engineer, Research Institute of Structural Materials and Technological Processes (NII KM & TP)
P. Yu. Zhikharev, Leading Engineer, NII KM & TP, e-mail: zhikharev@bmstu.ru
A. V. Perestoronin, Cand. Eng., 2nd category engineer of the Scientific and Educational Center "Center for Additive Technologies"

 

PJSC Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia:
V. V. Mukhin, Cand. Eng., Leading Engineer of the Rolling Production Group of the Scientific and Technical Center

40 years of the Department of "Mechanical Engineering" of the Naberezhnochelninsky Institute Kazan Federal University
ArticleName Formability of blanks from hot-rolled microalloyed steel plate with high yield strength
ArticleAuthors V. G. Shibakov, D. L. Pankratov, A. M. Valiev, R. V. Shibakov
ArticleAuthorsData

Naberezhnye Chelny Institute of Kazan Federal University, Naberezhnye Chelny, Russia:

V. G. Shibakov, Dr. Eng., Prof., Head of the Dept. “Mechanical Engineering”, e-mail: vladshib50@gmail.com
D. L. Pankratov, Dr. Eng., Director of the Higher Engineering School, e-mail: pankratovdl@gmail.com
A. M. Valiev, Cand. Eng., Associate Professor, e-mail: cct-ineka@yandex.ru
R. V. Shibakov, Cand. Eng., Associate Professor

ArticleName Hardening of long steel products by shot peening
ArticleAuthors V. I. Astashchenko, G. F. Mukhametzyanova, V. E. Orlyansky, I. Zh. Kharisov
ArticleAuthorsData

Naberezhnye Chelny Institute of Kazan Federal University, Naberezhnye Chelny, Russia:

V. I. Astashchenko, Dr. Eng., Prof., Dept. of Materials, Technologies and Quality, e-mail: astvi-52@mail.ru
G. F. Mukhametzyanova, Cand. Eng., Associate Prof., Dept. of Materials, Technologies and Quality, e-mail: gulnara-ineka@mail.ru

 

PTC KAMAZ, Naberezhnye Chelny, Russia:
V. E. Orlyansky, Head of the Chassis Units Department of the Scientific and Technical Center, e-mail: Vladimir.Orlyanskiy@kamaz.ru
I. Zh. Kharisov, Head of the Design Bureau of the Forging Plant, e-mail: HarisovIZ@kamaz.ru

ArticleName Technology and hardware design of remelting cast iron shavings by electroslag process
ArticleAuthors N. N. Safronov, L. R. Kharisov, D. R. Aflyatonov
ArticleAuthorsData

Naberezhnye Chelny Institute of Kazan Federal University, Naberezhnye Chelny, Russia:

N. N. Safronov, Dr. Eng., Prof., Dept. of Machine-building, e-mail: ln271@mail.ru
L. R. Kharisov, Cand. Eng., Associate Prof., Dept. of Machine-building
D. R. Aflyatonov, Undergraduate, Dept. of Machine-building

Metal Rolling and Other Metal Processing Processes
ArticleName Development of an automated system for stack cutting machine of rolling production
ArticleAuthors A. V. Tsukanov, K. V. Litsin
ArticleAuthorsData

Orenburg State University, Orenburg, Russia:

A. V. Tsukanov, Undergraduate, e-mail: 03-06-2000@mail.ru

 

South Ural State University (National Research University), Chelyabinsk, Russia1 ; Novotroitsk branch of NUST MISIS, Novotroitsk, Russia2:

K. V. Litsin, Cand. Eng., Associate Prof. of Dep. "Electric Drive and Mechatronics"1, Associate Prof. of Dep. "Electric Power and Electrical Engineering"2, e-mail: k.litsin@rambler.ru

ArticleName Development of situation models for duration of production cycles of manufacturing finished rolled products. Message 1
ArticleAuthors A. R. Fastykovsky, A. I. Musatova, S. M. Kulakov, N. V. Martyushev, A. I. Karlina
ArticleAuthorsData

Siberian State Industrial University, Novokuznetsk, Russia:
A. R. Fastykovsky, Dr. Eng., Associate Prof., Head of the Dept. of Metal Processing and Metal Science EVRAZ ZSMK, e-mail: fastikovsly@mail.ru
A. I. Musatova, Lecturer of the Institute of Additional Education, e-mail: musatova-ai@yandex.ru
S. M. Kulakov, Dr. Eng., Prof., Dept. of Automation and Information Systems, e-mail: kulakov-ais@mail.ru

 

Tomsk Polytechnic University, Tomsk, Russia:
N. V. Martyushev, Cand. Eng., Associate Prof., Dept. of Metal Science, e-mail: martjushev@tpu.ru

 

Moscow State University of Civil Engineering, Moscow, Russia:
A. I. Karlina, Cand. Eng., Reserarcher, e-mail: karlinat@mail.ru

Powder Metallurgy
ArticleName Planning experiments for heat treatment of products from powder steels in electrolytes
ArticleAuthors S. I. Bogodukhov, E. S. Kozik, V. S. Garipov
ArticleAuthorsData

Orenburg State University, Orenburg, Russia:

S. I. Bogodukhov, Dr. Eng., Prof., Dept. of Materials Science and Technology of Materials, e-mail: ogu@mailgate.ru
E. S. Kozik, Cand. Eng., Associate Prof., Dept. of Materials Science and Technology of Materials, e-mail: ele57670823@yandex.ru
V. S. Garipov, Cand. Eng., Associate Prof., Dept. of Technology of Building Processes, e-mail: vladimir.garipov@mail.ru

Physics of Metals
ArticleName Optimization of modes of pendular surface plastic deformation for intensification of the stress-strain state of carbon steel parts
ArticleAuthors S. A. Zaides, Kho Min Kuan
ArticleAuthorsData

Irkutsk National Research Technical University, Irkutsk, Russia:

S. A. Zaides, Dr. Eng., Prof., Dept. of Materials Science, Welding and Additive Technologies, e-mail: zsa@istu.edu
Kho Min Kuan, Postgraduate Student, Dept. of Materials Science, Welding and Additive Technologies, e-mail: minhquanho2605@gmail.com

Mechanical Engineering Technologies
ArticleName Influence of magnetic-abrasive machining parameters on ceramic cutting tools for technological quality assurance of precision products from cold-resistant steels
ArticleAuthors V. V. Maksarov, M. A. Popov, V. P. Zakharova
ArticleAuthorsData

St. Petersburg Mining University, St. Petersburg, Russia:
V. V. Maksarov, Dr. Eng., Prof., Dean of the Faculty of Mechanical Engineering, Head of the Dept. of Mechanical Engineering, e-mail: maks78.54@mail.ru
M. A. Popov, Postgraduate Student, Dept. of Mechanical Engineering, e-mail: popov.maksim.spb@mail.ru
V. P. Zakharova, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: veraz73@mail.ru

ArticleName Tensile test of a specimen from different-thickness sheet material.
ArticleAuthors A. N. Malyshev, V. D. Kukhar, A. V. Chernyaev, V. A. Korotkov
ArticleAuthorsData

Kaluga branch of Bauman MSTU (National Research University), Kaluga, Russia:

A. N. Malyshev, Cand. Eng. Associate Prof. of the MK1 Dept. of Engineering Technologies

 

Tula State University, Tula, Russia:
V. D. Kukhar, Dr. Eng., Prof., Head of the Dept. of Theoretical Mechanics
A. V. Chernyaev, Dr. Eng., Prof. of the Dept. of Mechanics of Plastic Forming, e-mail: sovet01tsu@rambler.ru
V. A. Korotkov, Cand. Eng., Associate Prof., Dept. of Mechanics of Plastic Forming

Economics and Finance
ArticleName Management of the development of a metallurgical company on the basis of the algorithm of the pre-investment analysis
ArticleAuthors V. S. Vasiltsov, M. S. Nysh, A. V. Solovieva
ArticleAuthorsData

Cherepovets State University, Cherepovets, Russia:
V. S. Vasiltsov, Dr. Econ., Associate Prof., Dept. of Economics and Management, Business School, e-mail: 3297@rambler.ru
M. S. Nysh, Postgraduate Student, Business School, e-mail: marianysh@yandex.ru

 

JSC Severstal Management, Cherepovets, Russia:
A. V. Solovieva, Manager, PSTP, Rolling Production Controlling, e-mail: avsoloveva2@chsu.ru

Journals →  Chernye Metally →  2023 →  #1