Journals →  Chernye Metally →  2023 →  #3

Chernye Metally



Ore Dressing
ArticleName Experimental studies of the pelletizing process of reground iron ore concentrate from Stoilensky GOK using new compositions of bentonite-polymer binders
ArticleAuthors D. A. Vetugov, T. N. Matveeva
ArticleAuthorsData

Bentonite of Khakassia Ltd., Chernogorsk, Russia1 ; Research Institute of Comprehensive Exploitation of Mineral Resources named after Academician N. V. Melnikov (ICEMR RAS), Moscow, Russia2:

D. A. Vetyugov, Mineral Processing Technologist1, Postgraduate Student2, e-mail: vetug7@gmail.com

 

Research Institute of Comprehensive Exploitation of Mineral Resources named after Academician N. V. Melnikov (ICEMR RAS), Moscow, Russia:

T. N. Matveeva, Dr. Eng., Deputy Director for Research, Head of the Dept. of Complex Extraction of Mineral Components from Natural and Technogenic Raw Materials, e-mail: tmatveyeva@mail.ru

Agglomeration
ArticleName Increasing the sintering rate of pellets with the complete replacement of bentonite with red mud
ArticleAuthors A. B. Lebedev, A. S. Ivkin
ArticleAuthorsData

St. Petersburg Mining University, St. Petersburg, Russia:

A. B. Lebedev, Cand. Eng., Researcher, Scientific Center "Problems of processing of mineral and technogenic resources", e-mail: 2799957@mail.ru
A. S. Ivkin, Cand. Eng., Head of Laboratory, Scientific Center "Problems of processing of mineral and technogenic resources", e-mail: ivkin.alexey@yandex.ru

Foundry Production
ArticleName Optimization of chemical composition of cast iron molds. Part 3
ArticleAuthors V. A. Gulevsky, S. N. Tsurikhin, N. Yu. Miroshkin, N. A. Kidalov
ArticleAuthorsData

Volgograd Industrial College, Volgograd, Russia:

V. A. Gulevsky, Cand. Eng., Lecturer, e-mail: gulevskiy.v@mail.ru

 

Volgograd State Technical University, Volgograd, Russia:
S. N. Tsurikhin, Cand. Eng., Associate Prof., Dept. of Machinery and Technology of Foundry Production
N. Yu. Miroshkin, Head of Laboratory, Dept. of Machinery and Technology of Foundry Production
N. A. Kidalov, Dr. Eng., Prof., Head of the Dept. of Machinery and Technology of Foundry Production

Rolling and Other Metal Forming Processes
ArticleName Development of a mathematical model for predicting the transverse profile of dynamo steel cold-rolled strips. Message 1
ArticleAuthors D. A. Kovalev, V. A. Pimenov, M. A. Dagman, S. M. Belsky, I. P. Mazur
ArticleAuthorsData

Novolipetsk Iron and Steel Works, Lipetsk, Russia:

D. A. Kovalev, Cand. Eng., Director of the Directorate for the Development of New Process Technologies
V. A. Pimenov, Cand. Eng., Head of Technological Projects
M. A. Dagman, Senior Engineer, e-mail: dagman_ma@nlmk.com

 

Lipetsk State Technical University, Lipetsk, Russia:
S. M. Belsky, Dr. Eng., Prof. of the Dept. of Metal Forming
I. P. Mazur, Dr. Eng., Prof., Head of the Dept. of Metal Forming

ArticleName Improvement of the method for calculating metal shape change in a finishing universal three-roll rail pass
ArticleAuthors V. V. Dorofeev, A. V. Dobryansky, A. V. Golovatenko, D. E. Pervushin
ArticleAuthorsData

EVRAZ United West Siberian Iron and Steel Works JSC, Novokuznetsk, Russia:
V. V. Dorofeev, Dr. Eng., Chief Roll Designer of the Rail and Section Shop
A. V. Dobryansky, Senior Roll Designer of the Rail and Section Shop, e-mail: Andrey.Dobryanskij@evraz.com
A. V. Golovatenko, Cand. Eng., Technical Director
D. E. Pervushin, Senior Roll Designer of the Rail and Section Shop

ArticleName Influence of punching frequency on the temperature conditions of operation of cut-off knives of a press machine
ArticleAuthors N. A. Chichenev, A. O. Karfidov, M. V. Vasiliev, O. N. Chicheneva
ArticleAuthorsData

National University of Science and Technology “MISiS”, Moscow, Russia:

N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering of Technological Equipment, e-mail: chich38@mail.ru
A. O. Karfidov, Head of Dept. of Engineering of Technological Equipment, e-mail: a.korf@mail.ru
M. V. Vasiliev, Senior Lecturer, Dept. of Engineering of Technological Equipment, e-mail: mv@karfidovlab.com
O. N. Chicheneva, Cand. Eng., Associate Prof., Dept. of Computer-Aided Engineering and Design, e-mail: ch-grafika@mail.ru

Pipe Production
ArticleName Assessment of the strength of the Assel mill under increased loads
ArticleAuthors D. Y. Zvonarev, M. N. Noskova, D. A. Akhmerov, M. A. Pavlova
ArticleAuthorsData

South Ural State University, Chelyabinsk, Russia1 ; JSC RusNITI, Chelyabinsk, Russia2:

D. Yu. Zvonarev, Senior Lecturer, Dept. of Processes and Machines for Metal Forming1, Cand. Eng., Head of the Laboratory for Modeling Technological Processes2, e-mail: zvonarevdi@susu.ac.ru

M. N. Noskova, Master of the Dept. of Processes and Machines for Metal Forming1, Engineer of the Laboratory for Modeling Technological Processes2, e-mail: noskova@rosniti.ru

D. A. Akhmerov, Postgraduate Student, Dept. of Processes and Machines for Metal Forming1, Junior Researcher, Laboratory for Modeling Technological Processes2, e-mail: AhmerovDA@rosniti.ru

 

JSC RusNITI, Chelyabinsk, Russia:
M. A. Pavlova, Senior Engineer, Laboratory for Process Modeling, e-mail: pavlova@rosniti.ru

ArticleName Influence of temperature unevenness on the hardness, structure and defects of the piercing plug of a three-roll screw rolling 30-80 mill
ArticleAuthors R. L. Shatalov, E. E. Zagoskin, V. A. Medvedev
ArticleAuthorsData

Moscow Polytechnic University, Moscow, Russia:

R. L. Shatalov, Dr. Eng., Professor, e-mail: mmomd@mail.ru
E. E. Zagoskin, Postgraduate Student, e-mail: zagoskin86@yandex.ru

 

Bogorodsk branch of JSC NPO Pribor, Noginsk, Russia:
V. A. Medvedev, Technologist, e-mail: 10-bmt@mail.ru

Metal Science and Physics of Metals
ArticleName Study of fatigue structural changes in specimens of 09G2S steel obtained by the WAAM method
ArticleAuthors D. A. Ryabov, M. S. Anosov, A. A. Khlybov
ArticleAuthorsData

Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia:

D. A. Ryabov, Post-graduate Student, Assistant, Researcher of the Dept. of Materials Science, Materials Technology and Heat Treatment of Metals, e-mail: ryabovdm1996@gmail.com
M. S. Anosov, Cand. Eng., Associate Prof., Dept. of Technology and Equipment of Mechanical Engineering, e-mail: anosov-maksim@list.ru
A. A. Khlybov, Dr. Eng., Prof., Head of the Dept. of Materials Science, Materials Technology and Heat Treatment of Metals, e-mail: hlybov_52@mail.ru

ArticleName Research of melts as a basis for improvement of technologies of ferrous metallurgy
ArticleAuthors V. E. Sidorov, L. D. Son
ArticleAuthorsData

Ural State Pedagogical University, Ekaterinburg, Russia; Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia2:

V. E. Sidorov, Dr. Phys.-Math., Chief Researcher of the REC Rasplav1, Prof.2, e-mail: vesidor@mail.ru

 

Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia1 ; Institute of Metallurgy (Ural Branch of the Russian Academy of Sciences), Ekaterinburg, Russia2:
L. D. Son, Dr. Phys.-Math., Prof.1, Senior Researcher, Laboratory of Disordered Systems2, e-mail: ldson@yandex.ru

ArticleName Estimation of structural damage in structural alloys obtained on the basis of 3D printing by electric arc welding based on fractal analysis of microstructures
ArticleAuthors Yu. G. Kabaldin, M. S. Anosov, M. A. Chernigin
ArticleAuthorsData

Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia:

Yu. G. Kabaldin, Dr. Eng., Prof., Dept. of Technology and Equipment of Mechanical Engineering
M. S. Anosov, Cand. Eng., Associate Prof., Dept. of Technology and Equipment of Mechanical Engineering, e-mail: anosov-maksim@list.ru
M. A. Chernigin, Post-graduate Student, Engineer, Dept. of Technology and Equipment of Mechanical Engineering, e-mail: honeybadger52@yandex.ru

Ecology and Economics
ArticleName Mariupol Iron and Steel Works "Azovstal": yesterday, today, tomorrow
ArticleAuthors I. V. Butorina, M. V. Butorina, S. G. Melnik
ArticleAuthorsData

Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia:

I. V. Butorina, Dr. Eng., Prof., e-mail: butorina_irina@mail.ru
S. G. Melnik, Dr. Eng., Prof.

 

Baltic State Technical University "Voenmeh" named after D. F. Ustinov, St. Petersburg, Russia:

M. V. Butorina, Dr. Eng., Prof., e-mail: marina_butorina@inbox.ru

Technological Measurements and Defect Control
ArticleName Recognition of defects in hoisting ropes of metallurgical equipment by an optical method using neural networks
ArticleAuthors A. A. Kulchitskiy, O. K. Mansurova, M. Yu. Nikolaev
ArticleAuthorsData

St. Petersburg Mining University, St. Petersburg, Russia:

A. A. Kulchitskiy, Dr. Eng., Head of the Dept. of Automation of Technological Processes and Production, e-mail: doz-ku@rambler.ru
O. K. Mansurova, Cand. Eng., Associate Prof., Dept. of Automation of Technological Processes and Production, e-mail: erke7@mail.ru
M. Yu. Nikolaev, Undergraduate Student, Dept. of Automation of Technological Processes and Production, e-mail: misha1999181@gmail.com

Journals →  Chernye Metally →  2023 →  #3